Messages in this thread | | | Date | Sat, 14 May 2022 13:09:11 -0500 | Subject | Re: [PATCH] ath10k: do not enforce interrupt trigger type | From | Steev Klimaszewski <> |
| |
On 5/14/22 12:05 AM, Steev Klimaszewski wrote: > > On 5/13/22 10:57 AM, Kalle Valo wrote: >> Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> writes: >> >>> Interrupt line can be configured on different hardware in different >>> way, >>> even inverted. Therefore driver should not enforce specific trigger >>> type - edge rising - but instead rely on Devicetree to configure it. >>> >>> All Qualcomm DTSI with WCN3990 define the interrupt type as level high, >>> so the mismatch between DTSI and driver causes rebind issues: >>> >>> $ echo 18800000.wifi > /sys/bus/platform/drivers/ath10k_snoc/unbind >>> $ echo 18800000.wifi > /sys/bus/platform/drivers/ath10k_snoc/bind >>> [ 44.763114] irq: type mismatch, failed to map hwirq-446 for >>> interrupt-controller@17a00000! >>> [ 44.763130] ath10k_snoc 18800000.wifi: error -ENXIO: IRQ index >>> 0 not found >>> [ 44.763140] ath10k_snoc 18800000.wifi: failed to initialize >>> resource: -6 >> So you tested on WCN3990? On what firmware version? I can add the >> Tested-on tag if you provide that. >> > Hello Krzystof, Kalle, > > I have seen this issue as well on a Lenovo Flex 5G, which has a WCN3990: > > wcn3990 hw1.0 target 0x00000008 chip_id 0x00000000 sub 0000:0000 > kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0 > firmware ver api 5 features wowlan,mgmt-tx-by-reference,non-bmi crc32 > b3d4b790 > htt-ver 3.86 wmi-op 4 htt-op 3 cal file max-sta 32 raw 0 hwcrypto 1 > > With this patch applied, I no longer see the error message in the > commit message, when I unbind/bind when wifi stops working. > > Tested-by: Steev Klimaszewski <steev@kali.org> > > -- Steev > Apologies for the second email - I've tested this now on both the Lenovo Flex 5G, as I have seen the issue on it as well, as well as on the Lenovo Yoga C630, where I did not but I did have issues with attempting to rebind the device, prior to this patch.
Firmware version for the Flex 5G is
qmi chip_id 0x30224 chip_family 0x4001 board_id 0xff soc_id 0x40060000 qmi fw_version 0x32080009 fw_build_timestamp 2020-11-16 14:44 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.3.2.0.c8-00009-QCAHLSWSC8180XMTPLZ-1
Firmware version on the Yoga C630 is
qmi chip_id 0x30214 chip_family 0x4001 board_id 0xff soc_id 0x40030001 qmi fw_version 0x2009856b fw_build_timestamp 2018-07-19 12:28 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1
| |