lkml.org 
[lkml]   [2022]   [May]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] iio: freq: admv1014: Fix warning about dubious x & !y and improve readability
On Wed, 11 May 2022 12:00:06 +0300
Antoniu Miclaus <antoniu.miclaus@analog.com> wrote:

> The warning comes from __BF_FIELD_CHECK()
> specifically
>
> BUILD_BUG_ON_MSG(__builtin_constant_p(_val) ? \
> ~((_mask) >> __bf_shf(_mask)) & (_val) : 0, \
> _pfx "value too large for the field"); \
>
> The code was using !(enum value) which is not particularly easy to follow
> so replace that with explicit matching and use of ? 0 : 1; or ? 1 : 0;
> to improve readability.
>
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>

Thanks.

Applied tot he fixes-togreg branch of iio.git.

Thanks,

Jonathan

> ---
> changes in v2:
> - fix the logic for the input mode set bits
> drivers/iio/frequency/admv1014.c | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/iio/frequency/admv1014.c b/drivers/iio/frequency/admv1014.c
> index a7994f8e6b9b..1aac5665b5de 100644
> --- a/drivers/iio/frequency/admv1014.c
> +++ b/drivers/iio/frequency/admv1014.c
> @@ -700,8 +700,10 @@ static int admv1014_init(struct admv1014_state *st)
> ADMV1014_DET_EN_MSK;
>
> enable_reg = FIELD_PREP(ADMV1014_P1DB_COMPENSATION_MSK, st->p1db_comp ? 3 : 0) |
> - FIELD_PREP(ADMV1014_IF_AMP_PD_MSK, !(st->input_mode)) |
> - FIELD_PREP(ADMV1014_BB_AMP_PD_MSK, st->input_mode) |
> + FIELD_PREP(ADMV1014_IF_AMP_PD_MSK,
> + (st->input_mode == ADMV1014_IF_MODE) ? 0 : 1) |
> + FIELD_PREP(ADMV1014_BB_AMP_PD_MSK,
> + (st->input_mode == ADMV1014_IF_MODE) ? 1 : 0) |
> FIELD_PREP(ADMV1014_DET_EN_MSK, st->det_en);
>
> return __admv1014_spi_update_bits(st, ADMV1014_REG_ENABLE, enable_reg_msk, enable_reg);

\
 
 \ /
  Last update: 2022-05-14 17:03    [W:0.036 / U:0.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site