lkml.org 
[lkml]   [2022]   [May]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 09/20] media: rkvdec: h264: Fix dpb_valid implementation
Date
The ref builder only provided references that are marked as valid in the
dpb. Thus the current implementation of dpb_valid would always set the
flag to 1. This is not representing missing frames (this is called
'non-existing' pictures in the spec). In some context, these non-existing
pictures still need to occupy a slot in the reference list according to
the spec.

Fixes: cd33c830448ba ("media: rkvdec: Add the rkvdec driver")
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
---
drivers/staging/media/rkvdec/rkvdec-h264.c | 33 ++++++++++++++++------
1 file changed, 24 insertions(+), 9 deletions(-)

diff --git a/drivers/staging/media/rkvdec/rkvdec-h264.c b/drivers/staging/media/rkvdec/rkvdec-h264.c
index dff89732ddd0..bcde37d72244 100644
--- a/drivers/staging/media/rkvdec/rkvdec-h264.c
+++ b/drivers/staging/media/rkvdec/rkvdec-h264.c
@@ -112,6 +112,7 @@ struct rkvdec_h264_run {
const struct v4l2_ctrl_h264_sps *sps;
const struct v4l2_ctrl_h264_pps *pps;
const struct v4l2_ctrl_h264_scaling_matrix *scaling_matrix;
+ int ref_buf_idx[V4L2_H264_NUM_DPB_ENTRIES];
};

struct rkvdec_h264_ctx {
@@ -725,6 +726,26 @@ static void assemble_hw_pps(struct rkvdec_ctx *ctx,
}
}

+static void lookup_ref_buf_idx(struct rkvdec_ctx *ctx,
+ struct rkvdec_h264_run *run)
+{
+ const struct v4l2_ctrl_h264_decode_params *dec_params = run->decode_params;
+ u32 i;
+
+ for (i = 0; i < ARRAY_SIZE(dec_params->dpb); i++) {
+ struct v4l2_m2m_ctx *m2m_ctx = ctx->fh.m2m_ctx;
+ const struct v4l2_h264_dpb_entry *dpb = run->decode_params->dpb;
+ struct vb2_queue *cap_q = &m2m_ctx->cap_q_ctx.q;
+ int buf_idx = -1;
+
+ if (dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_ACTIVE)
+ buf_idx = vb2_find_timestamp(cap_q,
+ dpb[i].reference_ts, 0);
+
+ run->ref_buf_idx[i] = buf_idx;
+ }
+}
+
static void assemble_hw_rps(struct rkvdec_ctx *ctx,
struct rkvdec_h264_run *run)
{
@@ -762,7 +783,7 @@ static void assemble_hw_rps(struct rkvdec_ctx *ctx,

for (j = 0; j < RKVDEC_NUM_REFLIST; j++) {
for (i = 0; i < h264_ctx->reflists.num_valid; i++) {
- u8 dpb_valid = 0;
+ bool dpb_valid = run->ref_buf_idx[i] >= 0;
u8 idx = 0;

switch (j) {
@@ -779,8 +800,6 @@ static void assemble_hw_rps(struct rkvdec_ctx *ctx,

if (idx >= ARRAY_SIZE(dec_params->dpb))
continue;
- dpb_valid = !!(dpb[idx].flags &
- V4L2_H264_DPB_ENTRY_FLAG_ACTIVE);

set_ps_field(hw_rps, DPB_INFO(i, j),
idx | dpb_valid << 4);
@@ -859,13 +878,8 @@ get_ref_buf(struct rkvdec_ctx *ctx, struct rkvdec_h264_run *run,
unsigned int dpb_idx)
{
struct v4l2_m2m_ctx *m2m_ctx = ctx->fh.m2m_ctx;
- const struct v4l2_h264_dpb_entry *dpb = run->decode_params->dpb;
struct vb2_queue *cap_q = &m2m_ctx->cap_q_ctx.q;
- int buf_idx = -1;
-
- if (dpb[dpb_idx].flags & V4L2_H264_DPB_ENTRY_FLAG_ACTIVE)
- buf_idx = vb2_find_timestamp(cap_q,
- dpb[dpb_idx].reference_ts, 0);
+ int buf_idx = run->ref_buf_idx[dpb_idx];

/*
* If a DPB entry is unused or invalid, address of current destination
@@ -1102,6 +1116,7 @@ static int rkvdec_h264_run(struct rkvdec_ctx *ctx)

assemble_hw_scaling_list(ctx, &run);
assemble_hw_pps(ctx, &run);
+ lookup_ref_buf_idx(ctx, &run);
assemble_hw_rps(ctx, &run);
config_registers(ctx, &run);

--
2.34.3
\
 
 \ /
  Last update: 2022-05-13 22:32    [W:0.088 / U:1.972 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site