lkml.org 
[lkml]   [2022]   [May]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[LINUX PATCH 0/2] Add Xilinx DSI-Tx DRM driver
    Date
    MIPI DSI TX subsystem allows you to quickly create systems based on the
    MIPI protocol. It interfaces between the video processing subsystems and
    MIPI-based displays. An internal high-speed physical layer design, D-PHY,
    is provided to allow direct connection to display peripherals.

    The subsystem consists of the following sub-blocks:
    - MIPI D-PHY
    - MIPI DSI TX Controller
    - AXI Crossbar

    Please refer pg238 [1].

    The DSI TX Controller receives stream of image data through an input stream
    interface. At design time, this subsystem can be configured to number of lanes
    and pixel format.

    This patch series adds the dt-binding and DRM driver for Xilinx DSI-Tx soft IP.

    References:
    [1]: https://www.xilinx.com/support/documentation/ip_documentation/mipi_dsi_tx_subsystem/v2_0/pg238-mipi-dsi-tx.pdf

    Venkateshwar Rao Gannavarapu (2):
    dt-bindings: display: xlnx: Add DSI 2.0 Tx subsystem documentation
    drm: xlnx: dsi: driver for Xilinx DSI Tx subsystem

    .../bindings/display/xlnx/xlnx,dsi-tx.yaml | 105 +++++
    drivers/gpu/drm/xlnx/Kconfig | 14 +
    drivers/gpu/drm/xlnx/Makefile | 1 +
    drivers/gpu/drm/xlnx/xlnx_dsi.c | 456 +++++++++++++++++++++
    4 files changed, 576 insertions(+)
    create mode 100644 Documentation/devicetree/bindings/display/xlnx/xlnx,dsi-tx.yaml
    create mode 100644 drivers/gpu/drm/xlnx/xlnx_dsi.c

    --
    1.8.3.1

    \
     
     \ /
      Last update: 2022-05-12 15:54    [W:4.247 / U:0.540 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site