lkml.org 
[lkml]   [2022]   [May]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 4/6] clk: qcom: add support for SM8350 DISPCC
On Wed, 4 May 2022 at 18:23, Konrad Dybcio <konrad.dybcio@somainline.org> wrote:
>
>
> On 04/05/2022 14:27, Robert Foss wrote:
> > From: Jonathan Marek <jonathan@marek.ca>
> >
> > Add support to the SM8350 display clock controller by extending the SM8250
> > display clock controller, which is almost identical but has some minor
> > differences.
> >
> > Signed-off-by: Jonathan Marek <jonathan@marek.ca>
> > Signed-off-by: Robert Foss <robert.foss@linaro.org>
> > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> > ---
> >
> > Changes since v1
> > - Remove comment - Dmitry
> >
> > Changes since v2
> > - Add my SoB - Bjorn
> > - Remove CLK_ASSUME_ENABLED_WHEN_UNUSED flag
> >
> >
> > drivers/clk/qcom/Kconfig | 4 +--
> > drivers/clk/qcom/dispcc-sm8250.c | 60 +++++++++++++++++++++++++++++++-
> > 2 files changed, 61 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> > index 9b1f54e634b9..1752ca0ee405 100644
> > --- a/drivers/clk/qcom/Kconfig
> > +++ b/drivers/clk/qcom/Kconfig
> > @@ -609,11 +609,11 @@ config SM_DISPCC_6125
> > splash screen
> >
> > config SM_DISPCC_8250
> > - tristate "SM8150 and SM8250 Display Clock Controller"
> > + tristate "SM8150/SM8250/SM8350 Display Clock Controller"
> > depends on SM_GCC_8150 || SM_GCC_8250
>
> || SM_GCC_8350?

Will fix in v4.

>
> sidenote: also || SC_GCC_8180X in a separate patch?

I haven't been involved in the 8180X work, and am a little bit
hesitant to include any changes related to it in this series.

>
> > help
> > Support for the display clock controller on Qualcomm Technologies, Inc
> > - SM8150 and SM8250 devices.
> > + SM8150/SM8250/SM8350 devices.
> > Say Y if you want to support display devices and functionality such as
> > splash screen.
> >
> > diff --git a/drivers/clk/qcom/dispcc-sm8250.c b/drivers/clk/qcom/dispcc-sm8250.c
> > index db9379634fb2..8e6cb990e387 100644
> > --- a/drivers/clk/qcom/dispcc-sm8250.c
> > +++ b/drivers/clk/qcom/dispcc-sm8250.c
> > @@ -43,6 +43,10 @@ static struct pll_vco vco_table[] = {
> > { 249600000, 2000000000, 0 },
> > };
> >
> > +static struct pll_vco lucid_5lpe_vco[] = {
> > + { 249600000, 1750000000, 0 },
> > +};
> > +
> > static struct alpha_pll_config disp_cc_pll0_config = {
> > .l = 0x47,
> > .alpha = 0xE000,
> > @@ -1228,6 +1232,7 @@ static const struct of_device_id disp_cc_sm8250_match_table[] = {
> > { .compatible = "qcom,sc8180x-dispcc" },
> > { .compatible = "qcom,sm8150-dispcc" },
> > { .compatible = "qcom,sm8250-dispcc" },
> > + { .compatible = "qcom,sm8350-dispcc" },
> > { }
> > };
> > MODULE_DEVICE_TABLE(of, disp_cc_sm8250_match_table);
> > @@ -1258,7 +1263,7 @@ static int disp_cc_sm8250_probe(struct platform_device *pdev)
> > return PTR_ERR(regmap);
> > }
> >
> > - /* note: trion == lucid, except for the prepare() op */
> > + /* Apply differences for SM8150 and SM8350 */
> > BUILD_BUG_ON(CLK_ALPHA_PLL_TYPE_TRION != CLK_ALPHA_PLL_TYPE_LUCID);
> > if (of_device_is_compatible(pdev->dev.of_node, "qcom,sc8180x-dispcc") ||
> > of_device_is_compatible(pdev->dev.of_node, "qcom,sm8150-dispcc")) {
> > @@ -1270,6 +1275,59 @@ static int disp_cc_sm8250_probe(struct platform_device *pdev)
> > disp_cc_pll1_config.config_ctl_hi1_val = 0x00000024;
> > disp_cc_pll1_config.user_ctl_hi1_val = 0x000000D0;
> > disp_cc_pll1_init.ops = &clk_alpha_pll_trion_ops;
> > + } else if (of_device_is_compatible(pdev->dev.of_node, "qcom,sm8350-dispcc")) {
> > + static struct clk_rcg2 * const rcgs[] = {
> > + &disp_cc_mdss_byte0_clk_src,
> > + &disp_cc_mdss_byte1_clk_src,
> > + &disp_cc_mdss_dp_aux1_clk_src,
> > + &disp_cc_mdss_dp_aux_clk_src,
> > + &disp_cc_mdss_dp_link1_clk_src,
> > + &disp_cc_mdss_dp_link_clk_src,
> > + &disp_cc_mdss_dp_pixel1_clk_src,
> > + &disp_cc_mdss_dp_pixel2_clk_src,
> > + &disp_cc_mdss_dp_pixel_clk_src,
> > + &disp_cc_mdss_esc0_clk_src,
> > + &disp_cc_mdss_mdp_clk_src,
> > + &disp_cc_mdss_pclk0_clk_src,
> > + &disp_cc_mdss_pclk1_clk_src,
> > + &disp_cc_mdss_rot_clk_src,
> > + &disp_cc_mdss_vsync_clk_src,
> > + };
> > + static struct clk_regmap_div * const divs[] = {
> > + &disp_cc_mdss_byte0_div_clk_src,
> > + &disp_cc_mdss_byte1_div_clk_src,
> > + &disp_cc_mdss_dp_link1_div_clk_src,
> > + &disp_cc_mdss_dp_link_div_clk_src,
> > + };
> > + unsigned int i;
> > + static bool offset_applied;
> > +
> > + /* only apply the offsets once (in case of deferred probe) */
> > + if (!offset_applied) {
> > + for (i = 0; i < ARRAY_SIZE(rcgs); i++)
> > + rcgs[i]->cmd_rcgr -= 4;
> > +
> > + for (i = 0; i < ARRAY_SIZE(divs); i++) {
> > + divs[i]->reg -= 4;
> > + divs[i]->width = 4;
> > + }
> > +
> > + disp_cc_mdss_ahb_clk.halt_reg -= 4;
> > + disp_cc_mdss_ahb_clk.clkr.enable_reg -= 4;
> > +
> > + offset_applied = true;
> > + }
> > +
> > + disp_cc_mdss_ahb_clk_src.cmd_rcgr = 0x22a0;
> > +
> > + disp_cc_pll0_config.config_ctl_hi1_val = 0x2A9A699C;
>
> Lowercase hex, also below.

Ack.

>
>
> > + disp_cc_pll0_config.test_ctl_hi1_val = 0x01800000;
> > + disp_cc_pll0_init.ops = &clk_alpha_pll_lucid_5lpe_ops;
> > + disp_cc_pll0.vco_table = lucid_5lpe_vco;
> > + disp_cc_pll1_config.config_ctl_hi1_val = 0x2A9A699C;
> > + disp_cc_pll1_config.test_ctl_hi1_val = 0x01800000;
> > + disp_cc_pll1_init.ops = &clk_alpha_pll_lucid_5lpe_ops;
> > + disp_cc_pll1.vco_table = lucid_5lpe_vco;
> > }
> >
> > clk_lucid_pll_configure(&disp_cc_pll0, regmap, &disp_cc_pll0_config);
> Konrad
> >

\
 
 \ /
  Last update: 2022-05-12 15:22    [W:0.096 / U:1.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site