lkml.org 
[lkml]   [2022]   [May]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v7 0/3] arm64: mvebu: Support for Marvell 98DX2530 (and variants)
Date
This series adds support for the Marvell 98DX2530 SoC which is the Control and
Management CPU integrated into the AlleyCat5/AlleyCat5X series of Marvell
switches.

The CPU core is an ARM Cortex-A55 with neon, simd and crypto extensions.

This is fairly similar to the Armada-3700 SoC so most of the required
peripherals are already supported. This series adds a devicetree and pinctrl
driver for the SoC and the RD-AC5X-32G16HVG6HLG reference board.

The pinctrl changes from v4 have been picked up and are in linux-next so I
haven't included them in this round. That leaves just the dts files and a minor
Kconfig update for arm64.

Chris Packham (3):
dt-bindings: marvell: Document the AC5/AC5X compatibles
arm64: dts: marvell: Add Armada 98DX2530 SoC and RD-AC5X board
arm64: marvell: enable the 98DX2530 pinctrl driver

.../bindings/arm/marvell/armada-98dx25xx.yaml | 32 ++
arch/arm64/Kconfig.platforms | 2 +
arch/arm64/boot/dts/marvell/Makefile | 1 +
.../boot/dts/marvell/armada-98dx25xx.dtsi | 295 ++++++++++++++++++
.../boot/dts/marvell/armada-98dx35xx-rd.dts | 101 ++++++
.../boot/dts/marvell/armada-98dx35xx.dtsi | 13 +
6 files changed, 444 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/marvell/armada-98dx25xx.yaml
create mode 100644 arch/arm64/boot/dts/marvell/armada-98dx25xx.dtsi
create mode 100644 arch/arm64/boot/dts/marvell/armada-98dx35xx-rd.dts
create mode 100644 arch/arm64/boot/dts/marvell/armada-98dx35xx.dtsi

--
2.36.0

\
 
 \ /
  Last update: 2022-05-12 06:25    [W:0.062 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site