lkml.org 
[lkml]   [2022]   [May]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: RFC: Memory Tiering Kernel Interfaces (v2)
From
Date
On Thu, 2022-05-12 at 16:37 +0800, ying.huang@intel.com wrote:
> On Thu, 2022-05-12 at 01:15 -0700, Wei Xu wrote:
> > On Thu, May 12, 2022 at 12:36 AM Aneesh Kumar K.V
> > <aneesh.kumar@linux.ibm.com> wrote:
> > >
> > > Wei Xu <weixugc@google.com> writes:
> > >
> > > > On Thu, May 12, 2022 at 12:12 AM Aneesh Kumar K V
> > > > <aneesh.kumar@linux.ibm.com> wrote:
> > > > >
> > > > > On 5/12/22 12:33 PM, ying.huang@intel.com wrote:
> > > > > > On Wed, 2022-05-11 at 23:22 -0700, Wei Xu wrote:
> > > > > > > Sysfs Interfaces
> > > > > > > ================
> > > > > > >
> > > > > > > * /sys/devices/system/memtier/memtierN/nodelist
> > > > > > >
> > > > > > >    where N = 0, 1, 2 (the kernel supports only 3 tiers for now).
> > > > > > >
> > > > > > >    Format: node_list
> > > > > > >
> > > > > > >    Read-only. When read, list the memory nodes in the specified tier.
> > > > > > >
> > > > > > >    Tier 0 is the highest tier, while tier 2 is the lowest tier.
> > > > > > >
> > > > > > >    The absolute value of a tier id number has no specific meaning.
> > > > > > >    What matters is the relative order of the tier id numbers.
> > > > > > >
> > > > > > >    When a memory tier has no nodes, the kernel can hide its memtier
> > > > > > >    sysfs files.
> > > > > > >
> > > > > > > * /sys/devices/system/node/nodeN/memtier
> > > > > > >
> > > > > > >    where N = 0, 1, ...
> > > > > > >
> > > > > > >    Format: int or empty
> > > > > > >
> > > > > > >    When read, list the memory tier that the node belongs to. Its value
> > > > > > >    is empty for a CPU-only NUMA node.
> > > > > > >
> > > > > > >    When written, the kernel moves the node into the specified memory
> > > > > > >    tier if the move is allowed. The tier assignment of all other nodes
> > > > > > >    are not affected.
> > > > > > >
> > > > > > >    Initially, we can make this interface read-only.
> > > > > >
> > > > > > It seems that "/sys/devices/system/node/nodeN/memtier" has all
> > > > > > information we needed. Do we really need
> > > > > > "/sys/devices/system/memtier/memtierN/nodelist"?
> > > > > >
> > > > > > That can be gotten via a simple shell command line,
> > > > > >
> > > > > > $ grep . /sys/devices/system/node/nodeN/memtier | sort -n -k 2 -t ':'
> > > > > >
> > > > >
> > > > > It will be really useful to fetch the memory tier node list in an easy
> > > > > fashion rather than reading multiple sysfs directories. If we don't have
> > > > > other attributes for memorytier, we could keep
> > > > > "/sys/devices/system/memtier/memtierN" a NUMA node list there by
> > > > > avoiding /sys/devices/system/memtier/memtierN/nodelist
> > > > >
> > > > > -aneesh
> > > >
> > > > It is harder to implement memtierN as just a file and doesn't follow
> > > > the existing sysfs pattern, either. Besides, it is extensible to have
> > > > memtierN as a directory.
> > >
> > > diff --git a/drivers/base/node.c b/drivers/base/node.c
> > > index 6248326f944d..251f38ec3816 100644
> > > --- a/drivers/base/node.c
> > > +++ b/drivers/base/node.c
> > > @@ -1097,12 +1097,49 @@ static struct attribute *node_state_attrs[] = {
> > >         NULL
> > >  };
> > >
> > > +#define MAX_TIER 3
> > > +nodemask_t memory_tier[MAX_TIER];
> > > +
> > > +#define _TIER_ATTR_RO(name, tier_index) \
> > > + { __ATTR(name, 0444, show_tier, NULL), tier_index, NULL }
> > > +
> > > +struct memory_tier_attr {
> > > + struct device_attribute attr;
> > > + int tier_index;
> > > + int (*write)(nodemask_t nodes);
> > > +};
> > > +
> > > +static ssize_t show_tier(struct device *dev,
> > > + struct device_attribute *attr, char *buf)
> > > +{
> > > + struct memory_tier_attr *mt = container_of(attr, struct memory_tier_attr, attr);
> > > +
> > > + return sysfs_emit(buf, "%*pbl\n",
> > > + nodemask_pr_args(&memory_tier[mt->tier_index]));
> > > +}
> > > +
> > >  static const struct attribute_group memory_root_attr_group = {
> > >         .attrs = node_state_attrs,
> > >  };
> > >
> > > +
> > > +#define TOP_TIER 0
> > > +static struct memory_tier_attr memory_tiers[] = {
> > > + [0] = _TIER_ATTR_RO(memory_top_tier, TOP_TIER),
> > > +};
> > > +
> > > +static struct attribute *memory_tier_attrs[] = {
> > > + &memory_tiers[0].attr.attr,
> > > + NULL
> > > +};
> > > +
> > > +static const struct attribute_group memory_tier_attr_group = {
> > > + .attrs = memory_tier_attrs,
> > > +};
> > > +
> > >  static const struct attribute_group *cpu_root_attr_groups[] = {
> > >         &memory_root_attr_group,
> > > + &memory_tier_attr_group,
> > >         NULL,
> > >  };
> > >
> > >
> > > As long as we have the ability to see the nodelist, I am good with the
> > > proposal.
> > >
> > > -aneesh
> >
> > I am OK with moving back the memory tier nodelist into node/. When
> > there are more memory tier attributes needed, we can then create the
> > memory tier subtree and replace the tier nodelist in node/ with
> > symlinks.
>
> What attributes do you imagine that we may put in memory_tierX/ sysfs
> directory? If we have good candidates in mind, we may just do that.
> What I can imagine now is "demote", like "memory_reclaim" in nodeX/ or
> node/ directory you proposed before. Is it necessary to show something
> like "meminfo", "vmstat" there?

My words may be confusing, so let me say it in another way.

Just for brainstorm, if we have

/sys/devices/system/memtier/memtierN/

What can we put in it in addition to "nodelist" or links to the nodes?
For example,

/sys/devices/system/memtier/memtierN/demote

When write a page number to it, the specified number of pages will be
demoted from memtierN to memtierN+1, like the
/sys/devices/system/node/memory_reclaim interface you proposed before.
Or, is it necessary to add

/sys/devices/system/memtier/memtierN/meminfo
/sys/devices/system/memtier/memtierN/vmstat

I don't mean to propose these. Just want to know whether there's
requirement for these kind of stuff? And what else may be required.

Best Regards,
Huang, Ying

> >
> > So the revised sysfs interfaces are:
> >
> > * /sys/devices/system/node/memory_tierN (read-only)
> >
> >   where N = 0, 1, 2
> >
> >   Format: node_list
> >
> > * /sys/devices/system/node/nodeN/memory_tier (read/write)
> >
> >   where N = 0, 1, ...
> >
> >   Format: int or empty
>


\
 
 \ /
  Last update: 2022-05-13 04:54    [W:0.190 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site