lkml.org 
[lkml]   [2022]   [May]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH net v2] net: ftgmac100: Disable hardware checksum on AST2600
Date
> -----Original Message-----
> From: joel.stan@gmail.com [mailto:joel.stan@gmail.com] On Behalf Of Joel
> Stanley
> Sent: Friday, May 13, 2022 7:20 AM
> To: David S . Miller <davem@davemloft.net>; Jakub Kicinski
> <kuba@kernel.org>; Paolo Abeni <pabeni@redhat.com>; Benjamin
> Herrenschmidt <benh@kernel.crashing.org>; Dylan Hung
> <dylan_hung@aspeedtech.com>; David Wilder <dwilder@us.ibm.com>
> Cc: openbmc@lists.ozlabs.org; netdev@vger.kernel.org;
> linux-kernel@vger.kernel.org; David Wilder <wilder@us.ibm.com>
> Subject: [PATCH net v2] net: ftgmac100: Disable hardware checksum on
> AST2600
>
> The AST2600 when using the i210 NIC over NC-SI has been observed to
> produce incorrect checksum results with specific MTU values. This was first
> observed when sending data across a long distance set of networks.
>
> On a local network, the following test was performed using a 1MB file of
> random data.
>
> On the receiver run this script:
>
> #!/bin/bash
> while [ 1 ]; do
> # Zero the stats
> nstat -r > /dev/null
> nc -l 9899 > test-file
> # Check for checksum errors
> TcpInCsumErrors=$(nstat | grep TcpInCsumErrors)
> if [ -z "$TcpInCsumErrors" ]; then
> echo No TcpInCsumErrors
> else
> echo TcpInCsumErrors = $TcpInCsumErrors
> fi
> done
>
> On an AST2600 system:
>
> # nc <IP of receiver host> 9899 < test-file
>
> The test was repeated with various MTU values:
>
> # ip link set mtu 1410 dev eth0
>
> The observed results:
>
> 1500 - good
> 1434 - bad
> 1400 - good
> 1410 - bad
> 1420 - good
>
> The test was repeated after disabling tx checksumming:
>
> # ethtool -K eth0 tx-checksumming off
>
> And all MTU values tested resulted in transfers without error.
>
> An issue with the driver cannot be ruled out, however there has been no bug
> discovered so far.
>
> David has done the work to take the original bug report of slow data transfer
> between long distance connections and triaged it down to this test case.
>
> The vendor suspects this this is a hardware issue when using NC-SI. The fixes
> line refers to the patch that introduced AST2600 support.
>
> Fixes: 39bfab8844a0 ("net: ftgmac100: Add support for DT phy-handle
> property")
> Reported-by: David Wilder <wilder@us.ibm.com>
> Signed-off-by: Joel Stanley <joel@jms.id.au>
> ---
> v2 updates the commit message with confirmation form the vendor that this is
> a hardware issue, and clarifes why the commit used in the fixes tag was
> chosen.
>
> drivers/net/ethernet/faraday/ftgmac100.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/net/ethernet/faraday/ftgmac100.c
> b/drivers/net/ethernet/faraday/ftgmac100.c
> index caf48023f8ea..5231818943c6 100644
> --- a/drivers/net/ethernet/faraday/ftgmac100.c
> +++ b/drivers/net/ethernet/faraday/ftgmac100.c
> @@ -1928,6 +1928,11 @@ static int ftgmac100_probe(struct platform_device
> *pdev)
> /* AST2400 doesn't have working HW checksum generation */
> if (np && (of_device_is_compatible(np, "aspeed,ast2400-mac")))
> netdev->hw_features &= ~NETIF_F_HW_CSUM;
> +
> + /* AST2600 tx checksum with NC-SI is broken */
> + if (priv->use_ncsi && of_device_is_compatible(np,
> "aspeed,ast2600-mac"))
> + netdev->hw_features &= ~NETIF_F_HW_CSUM;
> +
> if (np && of_get_property(np, "no-hw-checksum", NULL))
> netdev->hw_features &= ~(NETIF_F_HW_CSUM |
> NETIF_F_RXCSUM);
> netdev->features |= netdev->hw_features;
> --
> 2.35.1
Reviewed-by: Dylan Hung <dylan_hung@aspeedtech.com>

\
 
 \ /
  Last update: 2022-05-13 03:47    [W:0.086 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site