lkml.org 
[lkml]   [2022]   [May]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 06/16] arm64: dts: mediatek: asurada: Enable and configure I2C and SPI busses
Date
The Asurada platform has five I2C controllers and two SPI controllers
that are used. In preparation for enabling the devices connected to
these controllers, enable and configure their busses.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
---

(no changes since v1)

.../boot/dts/mediatek/mt8192-asurada.dtsi | 130 ++++++++++++++++++
1 file changed, 130 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
index ca55dd095e80..4fce48d0f653 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
@@ -85,6 +85,47 @@ ppvar_sys: regulator-var-sys {
};
};

+&i2c0 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+};
+
+&i2c1 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+};
+
+&i2c2 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+ clock-stretch-ns = <12600>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+};
+
+&i2c3 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+};
+
+&i2c7 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c7_pins>;
+};
+
&pio {
/* 220 lines */
gpio-line-names = "I2S_DP_LRCK",
@@ -311,6 +352,95 @@ &pio {
"AUD_DAT_MOSI1",
"AUD_DAT_MISO0",
"AUD_DAT_MISO1";
+
+ i2c0_pins: i2c0-default-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO204__FUNC_SCL0>,
+ <PINMUX_GPIO205__FUNC_SDA0>;
+ bias-pull-up;
+ mediatek,pull-up-adv = <3>;
+ mediatek,drive-strength-adv = <7>;
+ };
+ };
+
+ i2c1_pins: i2c1-default-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO118__FUNC_SCL1>,
+ <PINMUX_GPIO119__FUNC_SDA1>;
+ bias-pull-up;
+ mediatek,pull-up-adv = <3>;
+ mediatek,drive-strength-adv = <7>;
+ };
+ };
+
+ i2c2_pins: i2c2-default-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO141__FUNC_SCL2>,
+ <PINMUX_GPIO142__FUNC_SDA2>;
+ bias-pull-up;
+ mediatek,pull-up-adv = <3>;
+ mediatek,drive-strength-adv = <0>;
+ };
+ };
+
+ i2c3_pins: i2c3-default-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO160__FUNC_SCL3>,
+ <PINMUX_GPIO161__FUNC_SDA3>;
+ bias-disable;
+ mediatek,drive-strength-adv = <7>;
+ };
+ };
+
+ i2c7_pins: i2c7-default-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO124__FUNC_SCL7>,
+ <PINMUX_GPIO125__FUNC_SDA7>;
+ bias-disable;
+ mediatek,drive-strength-adv = <7>;
+ };
+ };
+
+ spi1_pins: spi1-default-pins {
+ pins-cs-mosi-clk {
+ pinmux = <PINMUX_GPIO157__FUNC_SPI1_A_CSB>,
+ <PINMUX_GPIO159__FUNC_SPI1_A_MO>,
+ <PINMUX_GPIO156__FUNC_SPI1_A_CLK>;
+ bias-disable;
+ };
+
+ pins-miso {
+ pinmux = <PINMUX_GPIO158__FUNC_SPI1_A_MI>;
+ bias-pull-down;
+ };
+ };
+
+ spi5_pins: spi5-default-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO38__FUNC_SPI5_A_MI>,
+ <PINMUX_GPIO37__FUNC_GPIO37>,
+ <PINMUX_GPIO39__FUNC_SPI5_A_MO>,
+ <PINMUX_GPIO36__FUNC_SPI5_A_CLK>;
+ bias-disable;
+ };
+ };
+};
+
+&spi1 {
+ status = "okay";
+
+ mediatek,pad-select = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins>;
+};
+
+&spi5 {
+ status = "okay";
+
+ cs-gpios = <&pio 37 GPIO_ACTIVE_LOW>;
+ mediatek,pad-select = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi5_pins>;
};

&uart0 {
--
2.36.1
\
 
 \ /
  Last update: 2022-05-12 22:58    [W:0.110 / U:0.612 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site