lkml.org 
[lkml]   [2022]   [May]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] MIPS: Ingenic: Refresh defconfig for CU1000-Neo and CU1830-Neo.
Date
Refresh the defconfig files of CU1000-Neo board and CU1830-Neo board,
remove the selection of SPI-GPIO, and add the selection of SSI.

Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
---
arch/mips/configs/cu1000-neo_defconfig | 2 +-
arch/mips/configs/cu1830-neo_defconfig | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/mips/configs/cu1000-neo_defconfig b/arch/mips/configs/cu1000-neo_defconfig
index 9d75f5b..5bd55eb 100644
--- a/arch/mips/configs/cu1000-neo_defconfig
+++ b/arch/mips/configs/cu1000-neo_defconfig
@@ -61,7 +61,7 @@ CONFIG_SERIAL_SC16IS7XX_SPI=y
CONFIG_I2C=y
CONFIG_I2C_JZ4780=y
CONFIG_SPI=y
-CONFIG_SPI_GPIO=y
+CONFIG_SPI_INGENIC=y
CONFIG_GPIO_SYSFS=y
CONFIG_SENSORS_ADS7828=m
CONFIG_WATCHDOG=y
diff --git a/arch/mips/configs/cu1830-neo_defconfig b/arch/mips/configs/cu1830-neo_defconfig
index 29decd00..cc69688 100644
--- a/arch/mips/configs/cu1830-neo_defconfig
+++ b/arch/mips/configs/cu1830-neo_defconfig
@@ -64,7 +64,7 @@ CONFIG_SERIAL_SC16IS7XX_SPI=y
CONFIG_I2C=y
CONFIG_I2C_JZ4780=y
CONFIG_SPI=y
-CONFIG_SPI_GPIO=y
+CONFIG_SPI_INGENIC=y
CONFIG_GPIO_SYSFS=y
CONFIG_SENSORS_ADS7828=m
CONFIG_WATCHDOG=y
--
2.7.4
\
 
 \ /
  Last update: 2022-05-12 21:35    [W:0.213 / U:1.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site