lkml.org 
[lkml]   [2022]   [May]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[v16 2/5] usb: dwc3: core: Host wake up support from system suspend
Date
From: Sandeep Maheswaram <quic_c_sanm@quicinc.com>

During suspend read the status of all port and set hs phy mode
based on current speed. Use this hs phy mode to configure wakeup
interrupts in qcom glue driver.

Check wakeup-source property for dwc3 core node to set the
wakeup capability. Drop the device_init_wakeup call from
runtime suspend and resume.

Also check during suspend if any wakeup capable devices are
connected to the controller (directly or through hubs), if there
are none set a flag to indicate that the PHY is powered
down during suspend.

Signed-off-by: Sandeep Maheswaram <quic_c_sanm@quicinc.com>
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
---
drivers/usb/dwc3/core.c | 30 +++++++++++++++++-------------
drivers/usb/dwc3/core.h | 4 ++++
drivers/usb/dwc3/host.c | 24 ++++++++++++++++++++++++
3 files changed, 45 insertions(+), 13 deletions(-)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 01115df..8bcabc5 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1785,6 +1785,7 @@ static int dwc3_probe(struct platform_device *pdev)

platform_set_drvdata(pdev, dwc);
dwc3_cache_hwparams(dwc);
+ device_init_wakeup(&pdev->dev, of_property_read_bool(dev->of_node, "wakeup-source"));

spin_lock_init(&dwc->lock);
mutex_init(&dwc->mutex);
@@ -1946,10 +1947,7 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
dwc3_core_exit(dwc);
break;
case DWC3_GCTL_PRTCAP_HOST:
- if (!PMSG_IS_AUTO(msg)) {
- dwc3_core_exit(dwc);
- break;
- }
+ dwc3_check_phy_speed_mode(dwc);

/* Let controller to suspend HSPHY before PHY driver suspends */
if (dwc->dis_u2_susphy_quirk ||
@@ -1965,6 +1963,15 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)

phy_pm_runtime_put_sync(dwc->usb2_generic_phy);
phy_pm_runtime_put_sync(dwc->usb3_generic_phy);
+
+ if (!PMSG_IS_AUTO(msg)) {
+ if (device_may_wakeup(dwc->dev))
+ dwc->phy_power_off = false;
+ else {
+ dwc->phy_power_off = true;
+ dwc3_core_exit(dwc);
+ }
+ }
break;
case DWC3_GCTL_PRTCAP_OTG:
/* do nothing during runtime_suspend */
@@ -2008,11 +2015,12 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
break;
case DWC3_GCTL_PRTCAP_HOST:
if (!PMSG_IS_AUTO(msg)) {
- ret = dwc3_core_init_for_resume(dwc);
- if (ret)
- return ret;
- dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
- break;
+ if (dwc->phy_power_off) {
+ ret = dwc3_core_init_for_resume(dwc);
+ if (ret)
+ return ret;
+ dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
+ }
}
/* Restore GUSB2PHYCFG bits that were modified in suspend */
reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
@@ -2084,8 +2092,6 @@ static int dwc3_runtime_suspend(struct device *dev)
if (ret)
return ret;

- device_init_wakeup(dev, true);
-
return 0;
}

@@ -2094,8 +2100,6 @@ static int dwc3_runtime_resume(struct device *dev)
struct dwc3 *dwc = dev_get_drvdata(dev);
int ret;

- device_init_wakeup(dev, false);
-
ret = dwc3_resume_common(dwc, PMSG_AUTO_RESUME);
if (ret)
return ret;
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 81c486b..37397a8 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -1155,6 +1155,9 @@ struct dwc3 {

bool phys_ready;

+ unsigned int hs_phy_mode;
+ bool phy_power_off;
+
struct ulpi *ulpi;
bool ulpi_ready;

@@ -1539,6 +1542,7 @@ int dwc3_core_soft_reset(struct dwc3 *dwc);
#if IS_ENABLED(CONFIG_USB_DWC3_HOST) || IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)
int dwc3_host_init(struct dwc3 *dwc);
void dwc3_host_exit(struct dwc3 *dwc);
+void dwc3_check_phy_speed_mode(struct dwc3 *dwc);
#else
static inline int dwc3_host_init(struct dwc3 *dwc)
{ return 0; }
diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index f56c30c..e19b40a 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -12,6 +12,7 @@
#include <linux/platform_device.h>

#include "core.h"
+#include "../host/xhci.h"

static void dwc3_host_fill_xhci_irq_res(struct dwc3 *dwc,
int irq, char *name)
@@ -136,3 +137,26 @@ void dwc3_host_exit(struct dwc3 *dwc)
{
platform_device_unregister(dwc->xhci);
}
+
+void dwc3_check_phy_speed_mode(struct dwc3 *dwc)
+{
+ int i, num_ports;
+ u32 reg;
+ struct usb_hcd *hcd = platform_get_drvdata(dwc->xhci);
+ struct xhci_hcd *xhci_hcd = hcd_to_xhci(hcd);
+
+ dwc->hs_phy_mode = 0;
+
+ reg = readl(&xhci_hcd->cap_regs->hcs_params1);
+
+ num_ports = HCS_MAX_PORTS(reg);
+ for (i = 0; i < num_ports; i++) {
+ reg = readl(&xhci_hcd->op_regs->port_status_base + i * NUM_PORT_REGS);
+ if (reg & PORT_PE) {
+ if (DEV_HIGHSPEED(reg) || DEV_FULLSPEED(reg))
+ dwc->hs_phy_mode |= PHY_MODE_USB_HOST_HS;
+ else if (DEV_LOWSPEED(reg))
+ dwc->hs_phy_mode |= PHY_MODE_USB_HOST_LS;
+ }
+ }
+}
--
2.7.4
\
 
 \ /
  Last update: 2022-05-12 20:24    [W:2.549 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site