lkml.org 
[lkml]   [2022]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 3/3] dt-bindings: cros-ec: Add ChromeOS fingerprint binding
Date
Add a binding to describe the fingerprint processor found on Chromebooks
with a fingerprint sensor. Previously we've been describing this with
the google,cros-ec-spi binding but it lacks gpio and regulator control
used during firmware flashing.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: <devicetree@vger.kernel.org>
Cc: <chrome-platform@lists.linux.dev>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Craig Hesling <hesling@chromium.org>
Cc: Tom Hughes <tomhughes@chromium.org>
Cc: Alexandru M Stan <amstan@chromium.org>
Cc: Tzung-Bi Shih <tzungbi@kernel.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Benson Leung <bleung@chromium.org>
Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
---
.../bindings/mfd/google,cros-ec.yaml | 80 ++++++++++++++++---
1 file changed, 71 insertions(+), 9 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
index 409ecef967ce..e5fe60beb9fe 100644
--- a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
+++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
@@ -19,15 +19,19 @@ description:
properties:
compatible:
oneOf:
- - description:
- For implementations of the EC is connected through I2C.
- const: google,cros-ec-i2c
- - description:
- For implementations of the EC is connected through SPI.
- const: google,cros-ec-spi
- - description:
- For implementations of the EC is connected through RPMSG.
- const: google,cros-ec-rpmsg
+ # For implementations of the EC is connected through I2C.
+ - items:
+ - const: google,cros-ec-i2c
+ # For implementations of the FPMCU connected through SPI.
+ - items:
+ - const: google,cros-ec-fp
+ - const: google,cros-ec-spi
+ # For implementations of the EC is connected through SPI.
+ - items:
+ - const: google,cros-ec-spi
+ # For implementations of the EC is connected through RPMSG.
+ - items:
+ - const: google,cros-ec-rpmsg

controller-data:
description:
@@ -132,6 +136,15 @@ properties:

additionalProperties: false

+ reset-gpios:
+ maxItems: 1
+
+ boot0-gpios:
+ maxItems: 1
+ description: Assert for bootloader mode.
+
+ vdd-supply: true
+
patternProperties:
"^i2c-tunnel[0-9]*$":
type: object
@@ -176,6 +189,37 @@ allOf:
- reg
- interrupts

+ - if:
+ properties:
+ compatible:
+ contains:
+ const: google,cros-ec-fp
+ then:
+ properties:
+ '#address-cells': false
+ '#size-cells': false
+ typec: false
+ ec-pwm: false
+ keyboard-controller: false
+ proximity: false
+ codecs: false
+ cbas: false
+
+ patternProperties:
+ "^i2c-tunnel[0-9]*$": false
+ "^regulator@[0-9]+$": false
+ "^extcon[0-9]*$": false
+
+ required:
+ - reset-gpios
+ - boot0-gpios
+ - vdd-supply
+ else:
+ properties:
+ reset-gpios: false
+ boot0-gpios: false
+ vdd-supply: false
+
additionalProperties: false

examples:
@@ -231,4 +275,22 @@ examples:
compatible = "google,cros-ec-rpmsg";
};
};
+
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
+ spi {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ ec@0 {
+ compatible = "google,cros-ec-fp", "google,cros-ec-spi";
+ reg = <0>;
+ interrupt-parent = <&gpio_controller>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+ spi-max-frequency = <3000000>;
+ reset-gpios = <&gpio_controller 5 GPIO_ACTIVE_LOW>;
+ boot0-gpios = <&gpio_controller 10 GPIO_ACTIVE_HIGH>;
+ vdd-supply = <&pp3300_fp_mcu>;
+ };
+ };
...
--
https://chromeos.dev
\
 
 \ /
  Last update: 2022-05-12 03:41    [W:0.436 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site