lkml.org 
[lkml]   [2022]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[Patch v6 2/9] dt-bindings: arm: tegra: Add NVIDIA Tegra194 CBB1.0 binding
Date
Add device-tree binding documentation to represent the
Control Backbone (CBB) version 1.0 used in Tegra194 SOC.

Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
---
.../arm/tegra/nvidia,tegra194-cbb.yaml | 98 +++++++++++++++++++
1 file changed, 98 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-cbb.yaml

diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-cbb.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-cbb.yaml
new file mode 100644
index 000000000000..f967b45e83d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-cbb.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/tegra/nvidia,tegra194-cbb.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: NVIDIA Tegra194 CBB 1.0 bindings
+
+maintainers:
+ - Sumit Gupta <sumitg@nvidia.com>
+
+description: |+
+ The Control Backbone (CBB) is comprised of the physical path from an
+ initiator to a target's register configuration space. CBB 1.0 has
+ multiple hierarchical sub-NOCs (Network-on-Chip) and connects various
+ initiators and targets using different bridges like AXIP2P, AXI2APB.
+
+ This driver handles errors due to illegal register accesses reported
+ by the NOCs inside the CBB. NOCs reporting errors are cluster NOCs
+ "AON-NOC, SCE-NOC, RCE-NOC, BPMP-NOC, CV-NOC" and "CBB Central NOC"
+ which is the main NOC.
+
+ By default, the access issuing initiator is informed about the error
+ using SError or Data Abort exception unless the ERD (Error Response
+ Disable) is enabled/set for that initiator. If the ERD is enabled, then
+ SError or Data Abort is masked and the error is reported with interrupt.
+
+ - For CCPLEX (CPU Complex) initiator, the driver sets ERD bit. So, the
+ errors due to illegal accesses from CCPLEX are reported by interrupts.
+ If ERD is not set, then error is reported by SError.
+ - For other initiators, the ERD is disabled. So, the access issuing
+ initiator is informed about the illegal access by Data Abort exception.
+ In addition, an interrupt is also generated to CCPLEX. These initiators
+ include all engines using Cortex-R5 (which is ARMv7 CPU cluster) and
+ engines like TSEC (Security co-processor), NVDEC (NVIDIA Video Decoder
+ engine) etc which can initiate transactions.
+
+ The driver prints relevant debug information like Error Code, Error
+ Description, Master, Address, AXI ID, Cache, Protection, Security Group
+ etc on receiving error notification.
+
+properties:
+ $nodename:
+ pattern: "^[a-z]+-noc@[0-9a-f]+$"
+
+ compatible:
+ enum:
+ - nvidia,tegra194-cbb-noc
+ - nvidia,tegra194-aon-noc
+ - nvidia,tegra194-bpmp-noc
+ - nvidia,tegra194-rce-noc
+ - nvidia,tegra194-sce-noc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description:
+ CCPLEX receives secure or nonsecure interrupt depending on error type.
+ A secure interrupt is received for SEC(firewall) & SLV errors and a
+ non-secure interrupt is received for TMO & DEC errors.
+ items:
+ - description: non-secure interrupt
+ - description: secure interrupt
+
+ nvidia,axi2apb:
+ $ref: '/schemas/types.yaml#/definitions/phandle'
+ description:
+ Specifies the node having all axi2apb bridges which need to be checked
+ for any error logged in their status register.
+
+ nvidia,apbmisc:
+ $ref: '/schemas/types.yaml#/definitions/phandle'
+ description:
+ Specifies the apbmisc node which need to be used for reading the ERD
+ register.
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - nvidia,axi2apb
+ - nvidia,apbmisc
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ cbb-noc@2300000 {
+ compatible = "nvidia,tegra194-cbb-noc";
+ reg = <0x02300000 0x1000>;
+ interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+ nvidia,axi2apb = <&axi2apb>;
+ nvidia,apbmisc = <&apbmisc>;
+ };
--
2.17.1
\
 
 \ /
  Last update: 2022-05-11 22:17    [W:0.089 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site