lkml.org 
[lkml]   [2022]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 4/4] arm64: dts: qcom: sdm630-nile: Add RGB status LED on the PM660L LPG
Date
The entire Sony Nile and Ganges lineup utilize the first three channels
(the triled channels) of the LPG block for an RGB (battery) status and
notification indicator.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
---
.../dts/qcom/sdm630-sony-xperia-nile.dtsi | 33 +++++++++++++++++++
1 file changed, 33 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
index 42af1fade461..f42304671520 100644
--- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
@@ -10,6 +10,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/leds/common.h>

/ {
/* required for bootloader to select correct board */
@@ -214,6 +215,38 @@ &blsp2_uart1 {
/* HCI Bluetooth */
};

+&pm660l_lpg {
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ qcom,power-source = <1>;
+
+ multi-led {
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_STATUS;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@3 {
+ reg = <3>;
+ color = <LED_COLOR_ID_RED>;
+ };
+ };
+};
+
&pon_pwrkey {
status = "okay";
};
--
2.36.1
\
 
 \ /
  Last update: 2022-05-11 21:08    [W:0.086 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site