lkml.org 
[lkml]   [2022]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 6/9] dt-bindings: remoteproc: qcom: mss: Convert bindings to YAML
From
On 11/05/2022 18:15, Sireesh Kodali wrote:
> Convert the bindings to YAML from txt. The bindings follow a similar
> schema to `qcom,adsp.yaml`.
>
> Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
> ---
> .../bindings/remoteproc/qcom,q6v5.txt | 302 --------
> .../bindings/remoteproc/qcom,q6v5.yaml | 702 ++++++++++++++++++
> 2 files changed, 702 insertions(+), 302 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
> create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,q6v5.yaml

Same comments as for patch 4 apply here. Some of them seems fixed so it
makes me wonder - why you wrote two bindings in entirely different way?

> + This document defines the binding for a component that loads and boots firmware
> + on the Qualcomm Hexagon core.
> +
> +properties:
> + compatible:
> + # Special case, because older platforms like MSM8916 use both compatibles together
> + minItems: 1
> + maxItems: 2
> + oneOf:
> + - items:
> + - enum:
> + - qcom,msm8916-mss-pil
> + - enum:
> + - qcom,q6v5-pil

Everywhere - same comments as in patch 4.

> + - items:
> + - enum:
> + - qcom,q6v5-pil
> + - qcom,ipq8074-wcss-pil
> + - qcom,qcs404-wcss-pil
> + - qcom,msm8916-mss-pil
> + - qcom,msm8974-mss-pil
> + - qcom,msm8996-mss-pil
> + - qcom,msm8998-mss-pil
> + - qcom,sc7180-mss-pil
> + - qcom,sc7280-mss-pil
> + - qcom,sdm845-mss-pil
> +
> + reg:
> + description: must specify the base address and size of the qdsp6 and rmb
> + register blocks
> + maxItems: 2
> +
> + reg-names:
> + items:
> + - const: qdsp6
> + - const: rmb
> +
> + interrupts-extended:
> + minItems: 5
> + maxItems: 6
> +
> + interrupt-names:
> + minItems: 5
> + maxItems: 6
> +
> + firmware-name:
> + $ref: /schemas/types.yaml#/definitions/string-array
> + description: List the relative firmware image paths for the mba and
> + modem. They are used for booting and authenticating the Hexagon core.
> + maxItems: 2
> +
> + clocks:
> + minItems: 4
> + maxItems: 10
> +
> + clock-names:
> + minItems: 4
> + maxItems: 10
> +
> + resets:
> + description: Reference to the reset-controllwer for the modem subsystem
> + minItems: 1
> + maxItems: 3
> +
> + reset-names:
> + minItems: 1
> + maxItems: 3
> +
> + memory-region:
> + maxItems: 1
> + description: Reference to the reserved-memory for the mba region followed
> + by the mpss region. Required if the mba and mpss sub-nodes are not
> + specified.
> +
> + cx-supply:
> + description: Phandle to the CX regulator
> +
> + mx-supply:
> + description: Phandle to the MX regulator
> +
> + pll-supply:
> + description: Phandle to the PLL regulator, to be held on behalf of the
> + booting Hexagon core
> +
> + mss-supply:
> + description: Phandle to the mss regulator, to be held on behalf of the
> + booting Hexagon core

s/Phandle to//, everywhere.

> +
> + power-domains:
> + minItems: 1
> + maxItems: 4
> +
> + power-domain-names:
> + minItems: 1
> + maxItems: 4
> +
> + qcom,qmp:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description: Reference to the AOSS side-channel message RAM.
> +
> + qcom,smem-states:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description: States used by the AP to signal the Hexagon core
> + items:
> + - description: Stop the modem
> +
> + qcom,smem-state-names:
> + $ref: /schemas/types.yaml#/definitions/string-array
> + description: The names of the state bits used for SMP2P output
> + items:
> + - const: stop
> +
> + qcom,halt-regs:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description:
> + Phandle reference to a syscon representing TCSR followed by the
> + three offsets within syscon for q6, modem and nc halt registers.
> +
> + qcom,spare-regs:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description:
> + A phandle reference to a syscon representing TCSR followed by the
> + offset within syscon for conn_box_spare0 register used by the modem
> + sub-system running on SC7180 SoC.
> +
> + qcom,ext-regs:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description:
> + Two phandle references to syscons representing TCSR_REG and TCSR
> + register space followed by the two offsets within the syscon to
> + force_clk_en/rscc_disable and axim1_clk_off/crypto_clk_off registers
> + respectively.
> +
> + qcom,qaccept-regs:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description:
> + A phandle reference to a syscon representing TCSR followed by the three
> + offsets within syscon for mdm, cx and axi qaccept registers used by the
> + modem sub-system running on SC7280 SoC.
> +
> + iommus:
> + description:
> + Only required on platforms that do not have TrustZone.
> +
> + smd-edge:
> + type: object
> + description:
> + Qualcomm Shared Memory subnode which represents communication edge,
> + channels and devices related to the ADSP.
> +
> + glink-edge:
> + type: object
> + description:
> + Qualcomm G-Link subnode which represents communication edge, channels
> + and devices related to the ADSP.
> +
> + mba:
> + type: object

description needed.

> + properties:
> + memory-region:
> + maxItems: 1
> +
> + required:
> + - memory-region
> +
> + mpss:

description needed.

> + type: object
> + properties:
> + memory-region:
> + maxItems: 1
> +
> + required:
> + - memory-region
> +
> +required:
> + - compatible
> + - clocks
> + - clock-names
> + - interrupts-extended
> + - interrupt-names
> + - qcom,smem-states
> + - qcom,smem-state-names
> +
> +additionalProperties: false
> +
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - qcom,ipq8074-wcss-pil
> + then:
> + properties:
> + clocks: false
> + clock-names: false
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - qcom,qcs404-wcss-pil
> + then:
> + properties:
> + clocks:
> + items:
> + - description: GCC_AHBS_CBCR clock
> + - description: GCC_AXIM_CBCR clock
> + - description: LCC_AHBFABRIC_CBC clock
> + - description: TCSR_LCC_CBC clock
> + - description: LCC_AHBS_CBC clock
> + - description: LCC_TCM_SLAVE_CBC clock
> + - description: LCC_ABHM_CBC clock
> + - description: LCC_AXIM_CBC clock
> + - description: LCC_BCR_SLEEP clock
> + - description: XO clock
> + clock-names:
> + items:
> + - const: gcc_ahbs_cbcr
> + - const: gcc_axim_cbcr
> + - const: lcc_ahbfabric_cbc
> + - const: tcsr_lcc_cbc
> + - const: lcc_abhs_cbc
> + - const: lcc_tcm_slave_cbc
> + - const: lcc_abhm_cbc
> + - const: lcc_axim_cbc
> + - const: lcc_bcr_sleep
> + - const: xo
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - qcom,q6v5-pil
> + - qcom,msm8916-mss-pil
> + - qcom,msm8974-mss-pil
> + then:
> + properties:
> + clocks:
> + items:
> + - description: Interface clock
> + - description: Bus clock
> + - description: Memory clock
> + - description: XO clock
> + clock-names:
> + items:
> + - const: iface
> + - const: bus
> + - const: mem
> + - const: xo
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - qcom,msm8996-mss-pil
> + then:
> + properties:
> + clocks:
> + items:
> + - description: Interface clock
> + - description: Bus clock
> + - description: Memory clock
> + - description: GPLL0_MSS clock
> + - description: SNOC_AXI clock
> + - description: MNOC_AXI clock
> + - description: PNOC clock
> + - description: QDSS clock
> + - description: XO clock
> + clock-names:
> + items:
> + - const: iface
> + - const: bus
> + - const: mem
> + - const: gpll0_mss
> + - const: snoc_axi
> + - const: mnoc_axi
> + - const: pnoc
> + - const: qdss
> + - const: xo
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - qcom,msm8998-mss-pil
> + then:
> + properties:
> + clocks:
> + items:
> + - description: Interface clock
> + - description: Bus clock
> + - description: Memory clock
> + - description: GPLL0_MSS clock
> + - description: SNOC_AXI clock
> + - description: MNOC_AXI clock
> + - description: QDSS clock
> + - description: XO clock
> + clock-names:
> + items:
> + - const: iface
> + - const: bus
> + - const: mem
> + - const: gpll0_mss
> + - const: snoc_axi
> + - const: mnoc_axi
> + - const: qdss
> + - const: xo
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - qcom,sc7180-mss-pil
> + then:
> + properties:
> + clocks:
> + items:
> + - description: Interface clock
> + - description: Bus clock
> + - description: NAV clock
> + - description: SNOC_AXI clock
> + - description: MNOC_AXI clock
> + - description: XO clock
> + clock-names:
> + items:
> + - const: iface
> + - const: bus
> + - const: nav
> + - const: snoc_axi
> + - const: mnoc_axi
> + - const: xo
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - qcom,sc7280-mss-pil
> + then:
> + properties:
> + clocks:
> + items:
> + - description: Interface clock
> + - description: Offline clock
> + - description: SNOC_AXI clock
> + - description: PKA clock
> + - description: XO clock
> + clock-names:
> + items:
> + - const: iface
> + - const: offline
> + - const: snoc_axi
> + - const: pka
> + - const: xo
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - qcom,sdm845-mss-pil
> + then:
> + properties:
> + clocks:
> + items:
> + - description: Interface clock
> + - description: Bus clock
> + - description: Memory clock
> + - description: GPLL0_MSS clock
> + - description: SNOC_AXI clock
> + - description: MNOC_AXI clock
> + - description: PRNG clock
> + - description: XO clock
> + clock-names:
> + items:
> + - const: iface
> + - const: bus
> + - const: mem
> + - const: gpll0_mss
> + - const: snoc_axi
> + - const: mnoc_axi
> + - const: prng
> + - const: xo
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - qcom,q6v5-pil
> + - qcom,ipq8074-wcss-pil
> + - qcom,qcs404-wcss-pil
> + - qcom,msm8916-mss-pil
> + - qcom,msm8974-mss-pil
> + then:
> + properties:
> + interrupts-extended:

No extended.

> + items:
> + - description: Watchdog interrupt
> + - description: Fatal interrupt
> + - description: Ready interrupt
> + - description: Handover interrupt
> + - description: Stop acknowledge interrupt
> + interrupt-names:
> + items:
> + - const: wdog
> + - const: fatal
> + - const: ready
> + - const: handover
> + - const: stop-ack
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - qcom,msm8996-mss-pil
> + - qcom,msm8998-mss-pil
> + - qcom,sc7180-mss-pil
> + - qcom,sc7280-mss-pil
> + - qcom,sdm845-mss-pil
> + then:
> + properties:
> + interrupts-extended:
> + items:
> + - description: Watchdog interrupt
> + - description: Fatal interrupt
> + - description: Ready interrupt
> + - description: Handover interrupt
> + - description: Stop acknowledge interrupt
> + - description: Shutdown acknowledge interrupt
> + interrupt-names:
> + items:
> + - const: wdog
> + - const: fatal
> + - const: ready
> + - const: handover
> + - const: stop-ack
> + - const: shutdown-ack

Both ifs should be written differently. Move the bigger list to
properties with minItems: 5. For qcom,q6v5-pil you set maxItems:5. For
qcom,msm8996-mss-pil you set minItems:6.

> +
> + - if:
> + properties:
> + compatible:
> + enum:
> + - const: qcom,q6v5-pil
> + - const: qcom,msm8916-mss-pil
> + - const: qcom,msm8974-mss-pil
> + then:
> + properties:
> + cx-supply:
> + deprecated: true
> + mx-supply:
> + deprecated: true
> +
> + required:
> + - pll-supply
> +
> + - if:
> + properties:
> + compatible:
> + enum:
> + - qcom,msm8916-mss-pil
> + - qcom,msm8974-mss-pil
> + - qcom,msm8996-mss-pil
> + - qcom,msm8998-mss-pil
> + then:
> + properties:
> + power-domains:
> + items:
> + - description: CX power domain
> + - description: MX power domain
> + power-domain-names:
> + items:
> + - const: cx
> + - const: mx
> +
> + required:
> + - power-domains
> + - power-domain-names
> +
> + - if:
> + properties:
> + compatible:
> + enum:
> + - const: qcom,msm8996-mss-pil
> + then:
> + properties:
> + cx-supply: false
> + mx-supply: false
> +
> + required:
> + - pll-supply
> +
> + - if:
> + properties:
> + compatible:
> + enum:
> + - const: qcom,qcs404-wcss-pil
> + then:
> + required:
> + - cx-supply
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - qcom,sdm845-mss-pil
> + - qcom,sc7180-mss-pil
> + then:
> + properties:
> + power-domains:
> + items:
> + - description: CX power domain
> + - description: MX power domain
> + - description: MSS power domain
> + power-domain-names:
> + items:
> + - const: cx
> + - const: mx
> + - const: mss
> +
> + required:
> + - power-domains
> + - power-domain-names
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - qcom,sc7280-mss-pil
> + then:
> + properties:
> + power-domains:
> + items:
> + - description: CX power domain
> + - description: MSS power domain
> + power-domain-names:
> + items:
> + - const: cx
> + - const: mss
> +
> + required:
> + - power-domains
> + - power-domain-names
> + - qcom,ext-regs
> + - qcom,qaccept-regs
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - qcom,q6v5-pil
> + - qcom,msm8916-mss-pil
> + - qcom,msm8974-mss-pil
> + - qcom,msm8996-mss-pil
> + - qcom,msm8998-mss-pil
> + then:
> + properties:
> + resets:
> + items:
> + - description: MSS reset
> + reset-names:
> + items:
> + - const: mss_restart
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - qcom,ipq8074-wcss-pil
> + - qcom,qcs404-wcss-pil
> + then:
> + properties:
> + resets:
> + items:
> + - description: WCSS Always On restart
> + - description: WCSS reset
> + - description: WCSS Q6 reset
> + reset-names:
> + items:
> + - const: wcss_aon_restart
> + - const: wcss_reset
> + - const: wcss_q6_reset
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - qcom,sc7180-mss-pil
> + - qcom,sc7280-mss-pil
> + - qcom,sdm845-mss-pil
> + then:
> + properties:
> + resets:
> + items:
> + - description: MSS restart
> + - description: PDC reset
> + reset-names:
> + items:
> + - const: mss_restart
> + - const: pdc_reset
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - qcom,q6v5-pil
> + - qcom,ipq8074-wcss-pil
> + - qcom,qcs404-wcss-pil
> + - qcom,msm8916-mss-pil
> + - qcom,msm8974-mss-pil
> + - qcom,msm8996-mss-pil
> + - qcom,msm8998-mss-pil
> + then:
> + properties:
> + qcom,qmp: false
> + iommus: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/qcom,rpmcc.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/clock/qcom,gcc-msm8974.h>
> + #include <dt-bindings/reset/qcom,gcc-msm8974.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + modem-rproc@fc880000 {

Generic node name, so "remoteproc"

> + compatible = "qcom,q6v5-pil";
> + reg = <0xfc880000 0x100>,
> + <0xfc820000 0x020>;
> + reg-names = "qdsp6", "rmb";
> +
> + interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
> + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "wdog",
> + "fatal",
> + "ready",
> + "handover",
> + "stop-ack";
> +
> + clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
> + <&gcc GCC_MSS_CFG_AHB_CLK>,
> + <&gcc GCC_BOOT_ROM_AHB_CLK>,
> + <&xo_board>;
> + clock-names = "iface", "bus", "mem", "xo";
> +
> + qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>;

Does this pass the tests? Did you test the bindings?

> +
> + resets = <&gcc GCC_MSS_RESTART>;
> + reset-names = "mss_restart";
> +
> + cx-supply = <&pm8841_s2>;
> + mss-supply = <&pm8841_s3>;
> + mx-supply = <&pm8841_s1>;
> + pll-supply = <&pm8941_l12>;
> +
> + qcom,smem-states = <&modem_smp2p_out 0>;
> + qcom,smem-state-names = "stop";
> +
> + mba {
> + memory-region = <&mba_region>;

Wrong indentation.

> + };
> +
> + mpss {
> + memory-region = <&mpss_region>;
> + };
> +
> + smd-edge {
> + interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
> +
> + qcom,ipc = <&apcs 8 12>;
> + qcom,smd-edge = <0>;
> +
> + label = "modem";
> + };
> + };


Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-05-11 19:51    [W:0.166 / U:3.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site