lkml.org 
[lkml]   [2022]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 4.14 22/78] serial: 8250: Correct the clock for EndRun PTP/1588 PCIe device
    Date
    From: Maciej W. Rozycki <macro@orcam.me.uk>

    commit 637674fa40059cddcc3ad2212728965072f62ea3 upstream.

    The EndRun PTP/1588 dual serial port device is based on the Oxford
    Semiconductor OXPCIe952 UART device with the PCI vendor:device ID set
    for EndRun Technologies and is therefore driven by a fixed 62.5MHz clock
    input derived from the 100MHz PCI Express clock. The clock rate is
    divided by the oversampling rate of 16 as it is supplied to the baud
    rate generator, yielding the baud base of 3906250.

    Replace the incorrect baud base of 4000000 with the right value of
    3906250 then, complementing commit 6cbe45d8ac93 ("serial: 8250: Correct
    the clock for OxSemi PCIe devices").

    Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
    Cc: stable <stable@kernel.org>
    Fixes: 1bc8cde46a159 ("8250_pci: Added driver for Endrun Technologies PTP PCIe card.")
    Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
    Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204181515270.9383@angie.orcam.me.uk
    Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    ---
    drivers/tty/serial/8250/8250_pci.c | 8 ++++----
    1 file changed, 4 insertions(+), 4 deletions(-)

    --- a/drivers/tty/serial/8250/8250_pci.c
    +++ b/drivers/tty/serial/8250/8250_pci.c
    @@ -2668,7 +2668,7 @@ enum pci_board_num_t {
    pbn_panacom2,
    pbn_panacom4,
    pbn_plx_romulus,
    - pbn_endrun_2_4000000,
    + pbn_endrun_2_3906250,
    pbn_oxsemi,
    pbn_oxsemi_1_4000000,
    pbn_oxsemi_2_4000000,
    @@ -3184,10 +3184,10 @@ static struct pciserial_board pci_boards
    * signal now many ports are available
    * 2 port 952 Uart support
    */
    - [pbn_endrun_2_4000000] = {
    + [pbn_endrun_2_3906250] = {
    .flags = FL_BASE0,
    .num_ports = 2,
    - .base_baud = 4000000,
    + .base_baud = 3906250,
    .uart_offset = 0x200,
    .first_offset = 0x1000,
    },
    @@ -4039,7 +4039,7 @@ static const struct pci_device_id serial
    */
    { PCI_VENDOR_ID_ENDRUN, PCI_DEVICE_ID_ENDRUN_1588,
    PCI_ANY_ID, PCI_ANY_ID, 0, 0,
    - pbn_endrun_2_4000000 },
    + pbn_endrun_2_3906250 },
    /*
    * Quatech cards. These actually have configurable clocks but for
    * now we just use the default.

    \
     
     \ /
      Last update: 2022-05-10 15:21    [W:4.188 / U:0.016 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site