lkml.org 
[lkml]   [2022]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [syzbot] INFO: task hung in synchronize_rcu (3)
From
Hello,

syzbot tried to test the proposed patch but the build/boot failed:

ackground, child pid 4958
[ 23.507564][ T4959] 8021q: adding VLAN 0 to HW filter on device bond0
[ 23.519205][ T4959] eql: remember to turn off Van-Jacobson compression on your slave devices
Starting sshd: OK

syzkaller
Warning: Permanently added '10.128.0.85' (ECDSA) to the list of known hosts.
2022/05/10 12:11:01 ignoring optional flag "raw_cover"="false"
2022/05/10 12:11:01 fuzzer started
2022/05/10 12:11:01 connecting to host at 10.128.0.169:33779
2022/05/10 12:11:01 checking machine...
2022/05/10 12:11:01 checking revisions...
2022/05/10 12:11:01 testing simple program...
syzkaller login: [ 40.935530][ T5379] cgroup: Unknown subsys name 'net'
[ 41.071569][ T5379] cgroup: Unknown subsys name 'rlimit'
[ 42.335602][ T5385] IPVS: ftp: loaded support on port[0] = 21
[ 42.394890][ T5385] chnl_net:caif_netlink_parms(): no params data found
[ 42.433361][ T5385] bridge0: port 1(bridge_slave_0) entered blocking state
[ 42.440978][ T5385] bridge0: port 1(bridge_slave_0) entered disabled state
[ 42.449123][ T5385] device bridge_slave_0 entered promiscuous mode
[ 42.458302][ T5385] bridge0: port 2(bridge_slave_1) entered blocking state
[ 42.466010][ T5385] bridge0: port 2(bridge_slave_1) entered disabled state
[ 42.473764][ T5385] device bridge_slave_1 entered promiscuous mode
[ 42.490493][ T5385] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[ 42.502207][ T5385] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[ 42.521537][ T5385] team0: Port device team_slave_0 added
[ 42.529481][ T5385] team0: Port device team_slave_1 added
[ 42.545295][ T5385] batman_adv: batadv0: Adding interface: batadv_slave_0
[ 42.552353][ T5385] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[ 42.578953][ T5385] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[ 42.591532][ T5385] batman_adv: batadv0: Adding interface: batadv_slave_1
[ 42.598589][ T5385] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[ 42.624881][ T5385] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[ 42.647993][ T5385] device hsr_slave_0 entered promiscuous mode
[ 42.654646][ T5385] device hsr_slave_1 entered promiscuous mode
[ 42.722230][ T5385] netdevsim netdevsim0 netdevsim0: renamed from eth0
[ 42.732556][ T5385] netdevsim netdevsim0 netdevsim1: renamed from eth1
[ 42.742043][ T5385] netdevsim netdevsim0 netdevsim2: renamed from eth2
[ 42.750927][ T5385] netdevsim netdevsim0 netdevsim3: renamed from eth3
[ 42.771509][ T5385] bridge0: port 2(bridge_slave_1) entered blocking state
[ 42.779012][ T5385] bridge0: port 2(bridge_slave_1) entered forwarding state
[ 42.786862][ T5385] bridge0: port 1(bridge_slave_0) entered blocking state
[ 42.794013][ T5385] bridge0: port 1(bridge_slave_0) entered forwarding state
[ 42.833264][ T5385] 8021q: adding VLAN 0 to HW filter on device bond0
[ 42.845912][ T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[ 42.854933][ T17] bridge0: port 1(bridge_slave_0) entered disabled state
[ 42.864247][ T17] bridge0: port 2(bridge_slave_1) entered disabled state
[ 42.872531][ T17] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
[ 42.886684][ T5385] 8021q: adding VLAN 0 to HW filter on device team0
[ 42.897461][ T17] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[ 42.907316][ T17] bridge0: port 1(bridge_slave_0) entered blocking state
[ 42.914462][ T17] bridge0: port 1(bridge_slave_0) entered forwarding state
[ 42.937517][ T3022] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[ 42.947781][ T3022] bridge0: port 2(bridge_slave_1) entered blocking state
[ 42.954822][ T3022] bridge0: port 2(bridge_slave_1) entered forwarding state
[ 42.963063][ T3022] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[ 42.972691][ T3022] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[ 42.981899][ T17] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[ 42.992884][ T2950] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[ 43.004741][ T5] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[ 43.016276][ T5385] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[ 43.032499][ T5] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[ 43.040966][ T5] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[ 43.054589][ T5385] 8021q: adding VLAN 0 to HW filter on device batadv0
[ 43.072616][ T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[ 43.090598][ T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[ 43.098877][ T5] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[ 43.107021][ T5] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[ 43.116925][ T5385] device veth0_vlan entered promiscuous mode
[ 43.128438][ T5385] device veth1_vlan entered promiscuous mode
[ 43.147614][ T3022] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[ 43.156727][ T3022] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[ 43.166137][ T3022] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[ 43.176463][ T5385] device veth0_macvtap entered promiscuous mode
[ 43.186693][ T5385] device veth1_macvtap entered promiscuous mode
[ 43.202698][ T5385] batman_adv: batadv0: Interface activated: batadv_slave_0
[ 43.210227][ T3022] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[ 43.220664][ T3022] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[ 43.232280][ T5385] batman_adv: batadv0: Interface activated: batadv_slave_1
[ 43.240456][ T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[ 43.290329][ T1019] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[ 43.304944][ T1019] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[ 43.314460][ T8] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[ 43.317814][ T17] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 43.322678][ T8] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[ 43.340187][ T17] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 43.375727][ T5385] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation
2022/05/10 12:11:04 building call list...
executing program
[ 43.949689][ T5385] ==================================================================
[ 43.958088][ T5385] BUG: KASAN: use-after-free in task_active_pid_ns+0xb1/0xd0
[ 43.965539][ T5385] Read of size 4 at addr ffff88823b705004 by task syz-executor.0/5385
[ 43.973758][ T5385]
[ 43.976084][ T5385] CPU: 1 PID: 5385 Comm: syz-executor.0 Not tainted 5.8.0-rc6-syzkaller-00003-g4fa640dc5230-dirty #0
[ 43.987108][ T5385] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
[ 43.997146][ T5385] Call Trace:
[ 44.000503][ T5385] dump_stack+0xf6/0x16e
[ 44.004912][ T5385] ? task_active_pid_ns+0xb1/0xd0
[ 44.009937][ T5385] ? task_active_pid_ns+0xb1/0xd0
[ 44.014952][ T5385] print_address_description.constprop.0.cold+0xae/0x467
[ 44.022061][ T5385] ? __wake_up_common_lock+0xde/0x130
[ 44.027426][ T5385] ? vprintk_func+0x95/0x241
[ 44.032153][ T5385] ? task_active_pid_ns+0xb1/0xd0
[ 44.037652][ T5385] kasan_report.cold+0x1f/0x37
[ 44.042526][ T5385] ? task_active_pid_ns+0xb1/0xd0
[ 44.049012][ T5385] task_active_pid_ns+0xb1/0xd0
[ 44.053869][ T5385] do_notify_parent+0x33a/0xf80
[ 44.058742][ T5385] ? do_exit+0x24f2/0x2ce0
[ 44.063163][ T5385] ? send_sigqueue+0x810/0x810
[ 44.068821][ T5385] ? lock_release+0x810/0x810
[ 44.073605][ T5385] ? zap_pid_ns_processes+0x547/0x6b0
[ 44.079083][ T5385] ? lockdep_hardirqs_on_prepare+0x383/0x560
[ 44.085067][ T5385] do_exit+0x222c/0x2ce0
[ 44.089312][ T5385] ? find_held_lock+0x2d/0x110
[ 44.094251][ T5385] ? mm_update_next_owner+0x7b0/0x7b0
[ 44.099762][ T5385] ? get_signal+0x330/0x20c0
[ 44.104390][ T5385] ? lock_downgrade+0x730/0x730
[ 44.109354][ T5385] do_group_exit+0x125/0x310
[ 44.113999][ T5385] get_signal+0x408/0x20c0
[ 44.118435][ T5385] ? __sanitizer_cov_trace_switch+0x45/0x70
[ 44.124335][ T5385] do_signal+0x82/0x2490
[ 44.128581][ T5385] ? preempt_schedule_irq+0x54/0xe0
[ 44.133868][ T5385] ? loop_configure+0x1350/0x1350
[ 44.138899][ T5385] ? copy_siginfo_to_user32+0xa0/0xa0
[ 44.144267][ T5385] ? lockdep_hardirqs_on_prepare+0x383/0x560
[ 44.150252][ T5385] ? blkdev_common_ioctl+0x1760/0x1760
[ 44.155730][ T5385] ? __prepare_exit_to_usermode+0x105/0x1e0
[ 44.161630][ T5385] ? lockdep_hardirqs_on_prepare+0x383/0x560
[ 44.167607][ T5385] __prepare_exit_to_usermode+0x12f/0x1e0
[ 44.173842][ T5385] do_syscall_64+0x52/0xe0
[ 44.178260][ T5385] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 44.184141][ T5385] RIP: 0033:0x7fc9dc7e3e07
[ 44.188537][ T5385] Code: Bad RIP value.
[ 44.192952][ T5385] RSP: 002b:00007fc9dce2ad78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 44.201527][ T5385] RAX: fffffffffffffffa RBX: 00007fc9dce2ae00 RCX: 00007fc9dc7e3e07
[ 44.209505][ T5385] RDX: 0000000000000000 RSI: 0000000000004c01 RDI: 0000000000000003
[ 44.217473][ T5385] RBP: 0000000000000003 R08: 0000000000000000 R09: 00007fc9dce2ac10
[ 44.225715][ T5385] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000032
[ 44.233866][ T5385] R13: 000000000000a98e R14: 0000000000000003 R15: 00007fc9dce2ae40
[ 44.241969][ T5385]
[ 44.244321][ T5385] Allocated by task 0:
[ 44.248405][ T5385] save_stack+0x1b/0x40
[ 44.253199][ T5385] __kasan_kmalloc.constprop.0+0xc2/0xd0
[ 44.258892][ T5385] kmem_cache_alloc+0xd7/0x310
[ 44.263743][ T5385] alloc_pid+0xd5/0xda0
[ 44.267914][ T5385] copy_process+0x3194/0x6f00
[ 44.272589][ T5385] _do_fork+0x12c/0xa90
[ 44.276747][ T5385] kernel_thread+0xb5/0xf0
[ 44.281155][ T5385] rest_init+0x23/0x460
[ 44.285492][ T5385] start_kernel+0x9a7/0x9e2
[ 44.290003][ T5385] secondary_startup_64+0xa4/0xb0
[ 44.295023][ T5385]
[ 44.297432][ T5385] Freed by task 5379:
[ 44.301413][ T5385] save_stack+0x1b/0x40
[ 44.305562][ T5385] __kasan_slab_free+0x11f/0x160
[ 44.310492][ T5385] slab_free_freelist_hook+0x53/0x140
[ 44.315869][ T5385] kmem_cache_free+0x8a/0x380
[ 44.320637][ T5385] put_pid.part.0+0xfa/0x150
[ 44.325216][ T5385] put_pid+0x1b/0x30
[ 44.329280][ T5385] proc_do_cad_pid+0x153/0x180
[ 44.334036][ T5385] proc_sys_call_handler+0x28f/0x5b0
[ 44.339320][ T5385] vfs_write+0x2b0/0x6b0
[ 44.343560][ T5385] ksys_write+0x12d/0x250
[ 44.347892][ T5385] do_syscall_64+0x46/0xe0
[ 44.352313][ T5385] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 44.358195][ T5385]
[ 44.360517][ T5385] The buggy address belongs to the object at ffff88823b705000
[ 44.360517][ T5385] which belongs to the cache pid of size 224
[ 44.373875][ T5385] The buggy address is located 4 bytes inside of
[ 44.373875][ T5385] 224-byte region [ffff88823b705000, ffff88823b7050e0)
[ 44.386972][ T5385] The buggy address belongs to the page:
[ 44.392605][ T5385] page:ffffea0008edc140 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0
[ 44.401714][ T5385] flags: 0x57ff00000000200(slab)
[ 44.406664][ T5385] raw: 057ff00000000200 dead000000000100 dead000000000122 ffff8880b5889400
[ 44.415255][ T5385] raw: 0000000000000000 00000000000c000c 00000001ffffffff 0000000000000000
[ 44.423841][ T5385] page dumped because: kasan: bad access detected
[ 44.430383][ T5385] page_owner tracks the page as allocated
[ 44.436115][ T5385] page last allocated via order 0, migratetype Unmovable, gfp_mask 0x0()
[ 44.444534][ T5385] register_early_stack+0x66/0xb0
[ 44.449557][ T5385] init_page_owner+0x6b/0x7e0
[ 44.454230][ T5385] page_ext_init+0x3a8/0x3b8
[ 44.458814][ T5385] kernel_init_freeable+0x31a/0x691
[ 44.463993][ T5385] page_owner free stack trace missing
[ 44.469360][ T5385]
[ 44.471943][ T5385] Memory state around the buggy address:
[ 44.477750][ T5385] ffff88823b704f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 44.485827][ T5385] ffff88823b704f80: 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc
[ 44.494006][ T5385] >ffff88823b705000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 44.502327][ T5385] ^
[ 44.506747][ T5385] ffff88823b705080: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
[ 44.514917][ T5385] ffff88823b705100: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00
[ 44.523036][ T5385] ==================================================================
[ 44.531112][ T5385] Disabling lock debugging due to kernel taint
[ 44.537345][ T5385] Kernel panic - not syncing: panic_on_warn set ...
[ 44.543927][ T5385] CPU: 1 PID: 5385 Comm: syz-executor.0 Tainted: G B 5.8.0-rc6-syzkaller-00003-g4fa640dc5230-dirty #0
[ 44.556232][ T5385] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
[ 44.566311][ T5385] Call Trace:
[ 44.569690][ T5385] dump_stack+0xf6/0x16e
[ 44.573924][ T5385] panic+0x370/0x7b0
[ 44.577811][ T5385] ? __warn_printk+0xf3/0xf3
[ 44.582893][ T5385] ? _raw_spin_unlock_irqrestore+0x2a/0x60
[ 44.588693][ T5385] ? task_active_pid_ns+0xb1/0xd0
[ 44.593702][ T5385] ? task_active_pid_ns+0xb1/0xd0
[ 44.598801][ T5385] end_report+0x4d/0x53
[ 44.603132][ T5385] kasan_report.cold+0xd/0x37
[ 44.607988][ T5385] ? task_active_pid_ns+0xb1/0xd0
[ 44.613020][ T5385] task_active_pid_ns+0xb1/0xd0
[ 44.617896][ T5385] do_notify_parent+0x33a/0xf80
[ 44.622770][ T5385] ? do_exit+0x24f2/0x2ce0
[ 44.627188][ T5385] ? send_sigqueue+0x810/0x810
[ 44.632657][ T5385] ? lock_release+0x810/0x810
[ 44.637341][ T5385] ? zap_pid_ns_processes+0x547/0x6b0
[ 44.642962][ T5385] ? lockdep_hardirqs_on_prepare+0x383/0x560
[ 44.649038][ T5385] do_exit+0x222c/0x2ce0
[ 44.653378][ T5385] ? find_held_lock+0x2d/0x110
[ 44.658402][ T5385] ? mm_update_next_owner+0x7b0/0x7b0
[ 44.663759][ T5385] ? get_signal+0x330/0x20c0
[ 44.668437][ T5385] ? lock_downgrade+0x730/0x730
[ 44.673317][ T5385] do_group_exit+0x125/0x310
[ 44.677990][ T5385] get_signal+0x408/0x20c0
[ 44.682633][ T5385] ? __sanitizer_cov_trace_switch+0x45/0x70
[ 44.688780][ T5385] do_signal+0x82/0x2490
[ 44.693465][ T5385] ? preempt_schedule_irq+0x54/0xe0
[ 44.698679][ T5385] ? loop_configure+0x1350/0x1350
[ 44.703960][ T5385] ? copy_siginfo_to_user32+0xa0/0xa0
[ 44.712100][ T5385] ? lockdep_hardirqs_on_prepare+0x383/0x560
[ 44.718153][ T5385] ? blkdev_common_ioctl+0x1760/0x1760
[ 44.723592][ T5385] ? __prepare_exit_to_usermode+0x105/0x1e0
[ 44.729636][ T5385] ? lockdep_hardirqs_on_prepare+0x383/0x560
[ 44.735596][ T5385] __prepare_exit_to_usermode+0x12f/0x1e0
[ 44.741652][ T5385] do_syscall_64+0x52/0xe0
[ 44.746053][ T5385] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 44.751954][ T5385] RIP: 0033:0x7fc9dc7e3e07
[ 44.756428][ T5385] Code: Bad RIP value.
[ 44.760473][ T5385] RSP: 002b:00007fc9dce2ad78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 44.769542][ T5385] RAX: fffffffffffffffa RBX: 00007fc9dce2ae00 RCX: 00007fc9dc7e3e07
[ 44.779439][ T5385] RDX: 0000000000000000 RSI: 0000000000004c01 RDI: 0000000000000003
[ 44.787651][ T5385] RBP: 0000000000000003 R08: 0000000000000000 R09: 00007fc9dce2ac10
[ 44.795603][ T5385] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000032
[ 44.803567][ T5385] R13: 000000000000a98e R14: 0000000000000003 R15: 00007fc9dce2ae40
[ 44.812073][ T5385] Kernel Offset: disabled
[ 44.816388][ T5385] Rebooting in 86400 seconds..


Error text is too large and was truncated, full error text is at:
https://syzkaller.appspot.com/x/error.txt?x=159d83faf00000


Tested on:

commit: 4fa640dc Merge tag 'vfio-v5.8-rc7' of git://github.com..
git tree: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/
kernel config: https://syzkaller.appspot.com/x/.config?x=c8387e9c623864db
dashboard link: https://syzkaller.appspot.com/bug?extid=0c6da80218456f1edc36
compiler: gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2
patch: https://syzkaller.appspot.com/x/patch.diff?x=12a4f831f00000

\
 
 \ /
  Last update: 2022-05-10 14:12    [W:0.027 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site