lkml.org 
[lkml]   [2022]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 3/7] tty: xilinx_uartps: Add check for runtime_get_sync calls
Date


> -----Original Message-----
> From: Greg KH <gregkh@linuxfoundation.org>
> Sent: Friday, May 6, 2022 2:21 AM
> To: Shubhrajyoti Datta <shubhraj@xilinx.com>
> Cc: linux-serial@vger.kernel.org; Michal Simek <michals@xilinx.com>;
> jirislaby@kernel.org; git <git@xilinx.com>; linux-kernel@vger.kernel.org
> Subject: Re: [PATCH 3/7] tty: xilinx_uartps: Add check for runtime_get_sync calls
>
> On Fri, Apr 29, 2022 at 01:44:18PM +0530, Shubhrajyoti Datta wrote:
> > Add a check for the return value of runtime get_sync calls.
> >
> > Addresses-Coverity: Event check_return.
> > Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
> > ---
> > drivers/tty/serial/xilinx_uartps.c | 6 +++++-
> > 1 file changed, 5 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/tty/serial/xilinx_uartps.c
> > b/drivers/tty/serial/xilinx_uartps.c
> > index 8f15fe24a0eb..868f4e587263 100644
> > --- a/drivers/tty/serial/xilinx_uartps.c
> > +++ b/drivers/tty/serial/xilinx_uartps.c
> > @@ -1100,13 +1100,17 @@ static void cdns_uart_poll_put_char(struct
> > uart_port *port, unsigned char c) static void cdns_uart_pm(struct uart_port
> *port, unsigned int state,
> > unsigned int oldstate)
> > {
> > + int ret;
> > +
> > switch (state) {
> > case UART_PM_STATE_OFF:
> > pm_runtime_mark_last_busy(port->dev);
> > pm_runtime_put_autosuspend(port->dev);
> > break;
> > default:
> > - pm_runtime_get_sync(port->dev);
> > + ret = pm_runtime_get_sync(port->dev);
> > + if (ret < 0)
> > + dev_err(port->dev, "Failed to enable clocks\n");
>
> So you just ignore the error? SHouldn't you propagate it back upward?

The cdns_uart_pm is void so we cannot propagate it upward.

>
> thanks,
>
> greg k-h

\
 
 \ /
  Last update: 2022-05-10 13:54    [W:0.062 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site