lkml.org 
[lkml]   [2022]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH V5 0/4] arm64: add i.MX93 support
Date
From: Peng Fan <peng.fan@nxp.com>

V5:
Add R-b from Aisheng
drop iomuxc status from board dts

V4:
Add A-b
In patch 1 to move imx93 behind imx8ulp
Drop a whitespace in patch 2

V3:
Add a new patch patch 1 for board binding doc
Add A-b from Rob
Fix dtb warnings.

V2:
Update License

Add i.MX93 dtsi and 11x11 evk board support

The required bindings and drivers has already been in tree.
There arem checkpatch error for the pin header files as other i.MX pin
pin header files.


Peng Fan (4):
dt-bindings: arm: fsl: add imx93 11x11 evk board
arm64: dts: freescale: Add i.MX93 dtsi support
arm64: dts: freescale: add i.MX93 11x11 EVK basic support
arm64: defconfig: enable i.MX93 clk & pinctrl

.../devicetree/bindings/arm/fsl.yaml | 6 +
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../boot/dts/freescale/imx93-11x11-evk.dts | 130 ++++
arch/arm64/boot/dts/freescale/imx93-pinfunc.h | 623 ++++++++++++++++++
arch/arm64/boot/dts/freescale/imx93.dtsi | 334 ++++++++++
arch/arm64/configs/defconfig | 2 +
6 files changed, 1096 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
create mode 100755 arch/arm64/boot/dts/freescale/imx93-pinfunc.h
create mode 100644 arch/arm64/boot/dts/freescale/imx93.dtsi

--
2.25.1

\
 
 \ /
  Last update: 2022-05-10 11:38    [W:0.070 / U:0.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site