Messages in this thread | | | Date | Tue, 10 May 2022 23:07:23 +0300 | Subject | Re: [PATCH] mtd: parsers: add support for Sercomm partitions | From | Mikhail Zhilkin <> |
| |
Hi Miquel,
On 3/30/2022 11:09 AM, Miquel Raynal wrote: > Hi Mikhail, > > csharper2005@gmail.com wrote on Tue, 29 Mar 2022 12:20:16 +0000: > >> This adds an MTD partition parser for the Sercomm partition table that >> is used in some Beeline, Netgear and Sercomm routers. >> >> The Sercomm partition map table contains real partition offsets, which >> may differ from device to device depending on the number and location of >> bad blocks on NAND. >> >> Device tree example: >> partitions { >> compatible = "sercomm,sc-partitions", "fixed-partitions"; >> #address-cells = <1>; >> #size-cells = <1>; >> >> partition@0 { >> label = "u-boot"; >> reg = <0x0 0x100000>; >> scpart-id = <0>; >> read-only; >> }; >> }; > You'll need a DT binding patch and Rob's ack!
I hope that I near to finish with DT binding...
Link: https://lore.kernel.org/all/20220510162314.20810-1-csharper2005@gmail.com/
Link: https://lore.kernel.org/all/20220510162403.20861-1-csharper2005@gmail.com/
>> This is essentially the same code as proposed by NOGUCHI Hiroshi >> <drvlabo@gmail.com> here: > I would credit Hiroshi with a Suggested-by at least
I read submitting patches rules again and thought that Signed-off-by is suitable for this case. Is this ok?
Link: https://lore.kernel.org/all/20220510162655.21011-1-csharper2005@gmail.com/
>> https://github.com/openwrt/openwrt/pull/1318#issuecomment-420607394 > And use a Link: tag for this. > Fixed, thanks!
Link: https://lore.kernel.org/all/20220510162655.21011-1-csharper2005@gmail.com/
> Thanks, > Miquèl -- Best regards, Mikhail
| |