lkml.org 
[lkml]   [2022]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] iommu/vt-d: Increase DMAR_UNITS_SUPPORTED
On Tue, May 10, 2022 at 01:16:26AM +0000, Tian, Kevin wrote:
> > From: Steve Wahl <steve.wahl@hpe.com>
> > Sent: Friday, May 6, 2022 11:26 PM
> >
> > On Fri, May 06, 2022 at 08:12:11AM +0000, Tian, Kevin wrote:
> > > > From: David Woodhouse <dwmw2@infradead.org>
> > > > Sent: Friday, May 6, 2022 3:17 PM
> > > >
> > > > On Fri, 2022-05-06 at 06:49 +0000, Tian, Kevin wrote:
> > > > > > From: Baolu Lu <baolu.lu@linux.intel.com>
> > > > > >
> > > > > > > --- a/include/linux/dmar.h
> > > > > > > +++ b/include/linux/dmar.h
> > > > > > > @@ -19,7 +19,7 @@
> > > > > > > struct acpi_dmar_header;
> > > > > > >
> > > > > > > #ifdef CONFIG_X86
> > > > > > > -# define DMAR_UNITS_SUPPORTED MAX_IO_APICS
> > > > > > > +# define DMAR_UNITS_SUPPORTED 640
> > > > > > > #else
> > > > > > > # define DMAR_UNITS_SUPPORTED 64
> > > > > > > #endif
> > > > >
> > > > > ... is it necessary to permanently do 10x increase which wastes memory
> > > > > on most platforms which won't have such need.
> > > >
> > > > I was just looking at that. It mostly adds about 3½ KiB to each struct
> > > > dmar_domain.
> > > >
> > > > I think the only actual static array is the dmar_seq_ids bitmap which
> > > > grows to 640 *bits* which is fairly negligible, and the main growth is
> > > > that it adds about 3½ KiB to each struct dmar_domain for the
> > > > iommu_refcnt[] and iommu_did[] arrays.
> > >
> > > Thanks for the quick experiment! though the added material is
> > > negligible it's cleaner to me if having a way to configure it as
> > > discussed below.
> > >
> > > >
> > > > > Does it make more sense to have a configurable approach similar to
> > > > > CONFIG_NR_CPUS? or even better can we just replace those static
> > > > > arrays with dynamic allocation so removing this restriction
> > > > > completely?
> > > >
> > > > Hotplug makes that fun, but I suppose you only need to grow the array
> > > > in a given struct dmar_domain if you actually add a device to it that's
> > > > behind a newly added IOMMU. I don't know if the complexity of making it
> > > > fully dynamic is worth it though. We could make it a config option,
> > > > and/or a command line option (perhaps automatically derived from
> > > > CONFIG_NR_CPUS).
> > >
> > > either config option or command line option is OK to me. Probably
> > > the former is simpler given no need to dynamically expand the
> > > static array. btw though deriving from CONFIG_NR_CPUS could work
> > > in this case it is unclear why tying the two together is necessary in
> > > concept, e.g. is there guarantee that the number of IOMMUs must
> > > be smaller than the number of CPUs in a platform?
> > >
> > > >
> > > > If it wasn't for hotplug, I think we'd know the right number by the
> > > > time we actually need it anyway, wouldn't we? Can we have a heuristic
> > > > for how many DMAR units are likely to be hotplugged? Is it as simple as
> > > > the ratio of present to not-yet-present CPUs in MADT?
> > >
> > > Probably. But I don't have enough knowledge on DMAR hotplug to
> > > judge (e.g. whether it's strictly tied to CPU hotplug and if yes whether
> > > there could be multiple IOMMUs hotplugged together with a CPU
> > > socket)...
> > >
> > > Thanks
> > > Kevin
> >
> > Would anyone be more comfortable if we only increase the limit where
> > MAXSMP is set?
> >
> > i.e.
> >
> > #if defined(CONFIG_X86) && defined(CONFIG_MAXSMP)
> > # define DMAR_UNITS_SUPPORTED 640
> > #elif defined(CONFIG_X86)
> > # define DMAR_UNITS_SUPPORTED MAX_IO_APICS
> > #else
> > # define DMAR_UNITS_SUPPORTED 64
> > #endif
> >
> > Thank you all for your time looking at this.
> >
>
> This works for your own configuration but it's unclear whether other
> MAXSMP platforms have the exact same requirements (different
> number of sockets, different ratio of #iommus/#sockets, etc.). In any
> case since we are at it having a generic way to extend it makes more
> sense to me.

So, to be clear, what you would like to see would be Kconfig entries
to create a config option, say "NR_DMARS", set up so the default is:

MAXSMP? 640
X86_64? 128
X86_32? 64
other 64

And DMAR_UNITS_SUPPORTED gets removed, and everywhere it was used we
use CONFIG_NR_DMARS in its place?
I can give that a shot but wanted to confirm this is what you'd want
first.

Thanks,

--> Steve

--
Steve Wahl, Hewlett Packard Enterprise

\
 
 \ /
  Last update: 2022-05-10 21:09    [W:0.115 / U:0.356 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site