lkml.org 
[lkml]   [2022]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V5 28/31] selftests/sgx: Test faulty enclave behavior
Date
Removing a page from an initialized enclave involves three steps:
first the user requests changing the page type to SGX_PAGE_TYPE_TRIM
via an ioctl(), on success the ENCLU[EACCEPT] instruction needs to be
run from within the enclave to accept the page removal, finally the
user requests page removal to be completed via an ioctl(). Only after
acceptance (ENCLU[EACCEPT]) from within the enclave can the kernel
remove the page from a running enclave.

Test the behavior when the user's request to change the page type
succeeds, but the ENCLU[EACCEPT] instruction is not run before the
ioctl() requesting page removal is run. This should not be permitted.

Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
---
Changes since V4:
- Rename struct sgx_enclave_modify_type ->
struct sgx_enclave_modify_types. (Jarkko)

Changes since V3:
- Add Jarkko's Acked-by tag.
- Rename SGX_IOC_ENCLAVE_MODIFY_TYPE to
SGX_IOC_ENCLAVE_MODIFY_TYPES. (Jarkko)
- User provides just page type to SGX_IOC_ENCLAVE_MODIFY_TYPES ioctl(),
replacing secinfo. (Jarkko)
- Let the SKIP() call involving SGX_IOC_ENCLAVE_MODIFY_TYPES span
two lines to address checkpatch.pl warning triggered by new longer
name.

Changes since V2:
- Rename struct sgx_enclave_modt -> struct sgx_enclave_modify_type

Changes since V1:
- Update to support ioctl() name change (SGX_IOC_PAGE_MODT ->
SGX_IOC_ENCLAVE_MODIFY_TYPE) and provide secinfo as parameter instead
of just page type (Jarkko).
- Update test to reflect page removal ioctl() and struct name change:
SGX_IOC_PAGE_REMOVE->SGX_IOC_ENCLAVE_REMOVE_PAGES,
struct sgx_page_remove -> struct sgx_enclave_remove_pages (Jarkko).
- Use ioctl() instead of ioctl in text (Dave).

tools/testing/selftests/sgx/main.c | 114 +++++++++++++++++++++++++++++
1 file changed, 114 insertions(+)

diff --git a/tools/testing/selftests/sgx/main.c b/tools/testing/selftests/sgx/main.c
index 8bf43646e0bb..3a82bae915d1 100644
--- a/tools/testing/selftests/sgx/main.c
+++ b/tools/testing/selftests/sgx/main.c
@@ -1433,4 +1433,118 @@ TEST_F(enclave, tcs_create)
munmap(addr, 3 * PAGE_SIZE);
}

+/*
+ * Ensure sane behavior if user requests page removal, does not run
+ * EACCEPT from within enclave but still attempts to finalize page removal
+ * with the SGX_IOC_ENCLAVE_REMOVE_PAGES ioctl(). The latter should fail
+ * because the removal was not EACCEPTed from within the enclave.
+ */
+TEST_F(enclave, remove_added_page_no_eaccept)
+{
+ struct sgx_enclave_remove_pages remove_ioc;
+ struct encl_op_get_from_addr get_addr_op;
+ struct sgx_enclave_modify_types modt_ioc;
+ struct encl_op_put_to_addr put_addr_op;
+ unsigned long data_start;
+ int ret, errno_save;
+
+ ASSERT_TRUE(setup_test_encl(ENCL_HEAP_SIZE_DEFAULT, &self->encl, _metadata));
+
+ memset(&self->run, 0, sizeof(self->run));
+ self->run.tcs = self->encl.encl_base;
+
+ /*
+ * Hardware (SGX2) and kernel support is needed for this test. Start
+ * with check that test has a chance of succeeding.
+ */
+ memset(&modt_ioc, 0, sizeof(modt_ioc));
+ ret = ioctl(self->encl.fd, SGX_IOC_ENCLAVE_MODIFY_TYPES, &modt_ioc);
+
+ if (ret == -1) {
+ if (errno == ENOTTY)
+ SKIP(return,
+ "Kernel does not support SGX_IOC_ENCLAVE_MODIFY_TYPES ioctl()");
+ else if (errno == ENODEV)
+ SKIP(return, "System does not support SGX2");
+ }
+
+ /*
+ * Invalid parameters were provided during sanity check,
+ * expect command to fail.
+ */
+ EXPECT_EQ(ret, -1);
+
+ /*
+ * Page that will be removed is the second data page in the .data
+ * segment. This forms part of the local encl_buffer within the
+ * enclave.
+ */
+ data_start = self->encl.encl_base +
+ encl_get_data_offset(&self->encl) + PAGE_SIZE;
+
+ /*
+ * Sanity check that page at @data_start is writable before
+ * removing it.
+ *
+ * Start by writing MAGIC to test page.
+ */
+ put_addr_op.value = MAGIC;
+ put_addr_op.addr = data_start;
+ put_addr_op.header.type = ENCL_OP_PUT_TO_ADDRESS;
+
+ EXPECT_EQ(ENCL_CALL(&put_addr_op, &self->run, true), 0);
+
+ EXPECT_EEXIT(&self->run);
+ EXPECT_EQ(self->run.exception_vector, 0);
+ EXPECT_EQ(self->run.exception_error_code, 0);
+ EXPECT_EQ(self->run.exception_addr, 0);
+
+ /*
+ * Read memory that was just written to, confirming that data
+ * previously written (MAGIC) is present.
+ */
+ get_addr_op.value = 0;
+ get_addr_op.addr = data_start;
+ get_addr_op.header.type = ENCL_OP_GET_FROM_ADDRESS;
+
+ EXPECT_EQ(ENCL_CALL(&get_addr_op, &self->run, true), 0);
+
+ EXPECT_EQ(get_addr_op.value, MAGIC);
+ EXPECT_EEXIT(&self->run);
+ EXPECT_EQ(self->run.exception_vector, 0);
+ EXPECT_EQ(self->run.exception_error_code, 0);
+ EXPECT_EQ(self->run.exception_addr, 0);
+
+ /* Start page removal by requesting change of page type to PT_TRIM */
+ memset(&modt_ioc, 0, sizeof(modt_ioc));
+
+ modt_ioc.offset = encl_get_data_offset(&self->encl) + PAGE_SIZE;
+ modt_ioc.length = PAGE_SIZE;
+ modt_ioc.page_type = SGX_PAGE_TYPE_TRIM;
+
+ ret = ioctl(self->encl.fd, SGX_IOC_ENCLAVE_MODIFY_TYPES, &modt_ioc);
+ errno_save = ret == -1 ? errno : 0;
+
+ EXPECT_EQ(ret, 0);
+ EXPECT_EQ(errno_save, 0);
+ EXPECT_EQ(modt_ioc.result, 0);
+ EXPECT_EQ(modt_ioc.count, 4096);
+
+ /* Skip EACCEPT */
+
+ /* Send final ioctl() to complete page removal */
+ memset(&remove_ioc, 0, sizeof(remove_ioc));
+
+ remove_ioc.offset = encl_get_data_offset(&self->encl) + PAGE_SIZE;
+ remove_ioc.length = PAGE_SIZE;
+
+ ret = ioctl(self->encl.fd, SGX_IOC_ENCLAVE_REMOVE_PAGES, &remove_ioc);
+ errno_save = ret == -1 ? errno : 0;
+
+ /* Operation not permitted since EACCEPT was omitted. */
+ EXPECT_EQ(ret, -1);
+ EXPECT_EQ(errno_save, EPERM);
+ EXPECT_EQ(remove_ioc.count, 0);
+}
+
TEST_HARNESS_MAIN
--
2.25.1
\
 
 \ /
  Last update: 2022-05-10 20:14    [W:0.183 / U:0.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site