lkml.org 
[lkml]   [2022]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 5.15 11/19] net: sfp: Add tx-fault workaround for Huawei MA5671A SFP ONT
Date
From: Matthew Hagan <mnhagan88@gmail.com>

[ Upstream commit 2069624dac19d62c558bb6468fe03678553ab01d ]

As noted elsewhere, various GPON SFP modules exhibit non-standard
TX-fault behaviour. In the tested case, the Huawei MA5671A, when used
in combination with a Marvell mv88e6085 switch, was found to
persistently assert TX-fault, resulting in the module being disabled.

This patch adds a quirk to ignore the SFP_F_TX_FAULT state, allowing the
module to function.

Change from v1: removal of erroneous return statment (Andrew Lunn)

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220502223315.1973376-1-mnhagan88@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/phy/sfp.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index 4720b24ca51b..90dfefc1f5f8 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -250,6 +250,7 @@ struct sfp {
struct sfp_eeprom_id id;
unsigned int module_power_mW;
unsigned int module_t_start_up;
+ bool tx_fault_ignore;

#if IS_ENABLED(CONFIG_HWMON)
struct sfp_diag diag;
@@ -1945,6 +1946,12 @@ static int sfp_sm_mod_probe(struct sfp *sfp, bool report)
else
sfp->module_t_start_up = T_START_UP;

+ if (!memcmp(id.base.vendor_name, "HUAWEI ", 16) &&
+ !memcmp(id.base.vendor_pn, "MA5671A ", 16))
+ sfp->tx_fault_ignore = true;
+ else
+ sfp->tx_fault_ignore = false;
+
return 0;
}

@@ -2397,7 +2404,10 @@ static void sfp_check_state(struct sfp *sfp)
mutex_lock(&sfp->st_mutex);
state = sfp_get_state(sfp);
changed = state ^ sfp->state;
- changed &= SFP_F_PRESENT | SFP_F_LOS | SFP_F_TX_FAULT;
+ if (sfp->tx_fault_ignore)
+ changed &= SFP_F_PRESENT | SFP_F_LOS;
+ else
+ changed &= SFP_F_PRESENT | SFP_F_LOS | SFP_F_TX_FAULT;

for (i = 0; i < GPIO_MAX; i++)
if (changed & BIT(i))
--
2.35.1
\
 
 \ /
  Last update: 2022-05-10 17:48    [W:0.092 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site