lkml.org 
[lkml]   [2022]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] PCI: mediatek-gen3: Assert resets to ensure expected init state
From
Il 09/05/22 19:16, Bjorn Helgaas ha scritto:
> On Mon, May 09, 2022 at 02:18:34PM +0200, AngeloGioacchino Del Regno wrote:
>> Il 04/04/22 16:48, AngeloGioacchino Del Regno ha scritto:
>>> The controller may have been left out of reset by the bootloader,
>>> in which case, before the powerup sequence, the controller will be
>>> found preconfigured with values that were set before booting the
>>> kernel: this produces a controller failure, with the result of
>>> a failure during the mtk_pcie_startup_port() sequence as the PCIe
>>> link never gets up.
>>>
>>> To ensure that we get a clean start in an expected state, assert
>>> both the PHY and MAC resets before executing the controller
>>> power-up sequence.
>>>
>>> Fixes: d3bf75b579b9 ("PCI: mediatek-gen3: Add MediaTek Gen3 driver for MT8192")
>>> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
>>
>> Friendly ping for an important fix :-)
>
> d3bf75b579b9 appeared in v5.13-rc1 (May 2021, a year ago), so I assume
> this is important for v5.19, but not urgent enough to require being in
> v5.18. Right?
>

Hello Bjorn,
no it's not *very* urgent, as MediaTek devices that do require this will be
in v5.19 anyway...

Thanks,
Angelo

\
 
 \ /
  Last update: 2022-05-10 10:00    [W:0.075 / U:0.768 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site