lkml.org 
[lkml]   [2022]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH V2 0/6] iio: accel: bmi088: support BMI085 BMI090L
    Date
    Modified the units after application of scale from 100*m/s^2 to m/s^2,
    since the units in the ABI documents are m/s^2.
    Add supports for the BMI085 accelerometer.
    Add supports for the BMI090L accelerometer.
    Make it possible to config scales.

    Change in V2:

    Use the correct bits only for `reg` to make sure it is in the correct range.
    Remove the unused 'name' parameter.
    Modified the compatible string for bmi088 and bmi090l in and binding document.
    Reorder the commits.


    LI Qingwu (6):
    iio: accel: bmi088: Modified the scale calculate
    iio: accel: bmi088: Make it possible to config scales
    iio: accel: bmi088: modified the device name
    iio: accel: bmi088: Add support for bmi085 accel
    iio: accel: bmi088: Add support for bmi090l accel
    dt-bindings: iio: accel: Add bmi085 and bmi090l bindings

    .../bindings/iio/accel/bosch,bmi088.yaml | 2 +
    drivers/iio/accel/bmi088-accel-core.c | 64 ++++++++++++++++---
    drivers/iio/accel/bmi088-accel-spi.c | 6 +-
    drivers/iio/accel/bmi088-accel.h | 2 +-
    4 files changed, 61 insertions(+), 13 deletions(-)

    --
    2.25.1

    \
     
     \ /
      Last update: 2022-05-10 16:54    [W:6.118 / U:0.044 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site