lkml.org 
[lkml]   [2022]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.17 100/140] bnxt_en: Fix possible bnxt_open() failure caused by wrong RFS flag
Date
From: Somnath Kotur <somnath.kotur@broadcom.com>

commit 13ba794397e45e52893cfc21d7a69cb5f341b407 upstream.

bnxt_open() can fail in this code path, especially on a VF when
it fails to reserve default rings:

bnxt_open()
__bnxt_open_nic()
bnxt_clear_int_mode()
bnxt_init_dflt_ring_mode()

RX rings would be set to 0 when we hit this error path.

It is possible for a subsequent bnxt_open() call to potentially succeed
with a code path like this:

bnxt_open()
bnxt_hwrm_if_change()
bnxt_fw_init_one()
bnxt_fw_init_one_p3()
bnxt_set_dflt_rfs()
bnxt_rfs_capable()
bnxt_hwrm_reserve_rings()

On older chips, RFS is capable if we can reserve the number of vnics that
is equal to RX rings + 1. But since RX rings is still set to 0 in this
code path, we may mistakenly think that RFS is supported for 0 RX rings.

Later, when the default RX rings are reserved and we try to enable
RFS, it would fail and cause bnxt_open() to fail unnecessarily.

We fix this in 2 places. bnxt_rfs_capable() will always return false if
RX rings is not yet set. bnxt_init_dflt_ring_mode() will call
bnxt_set_dflt_rfs() which will always clear the RFS flags if RFS is not
supported.

Fixes: 20d7d1c5c9b1 ("bnxt_en: reliably allocate IRQ table on reset to avoid crash")
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)

--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -10938,7 +10938,7 @@ static bool bnxt_rfs_capable(struct bnxt

if (bp->flags & BNXT_FLAG_CHIP_P5)
return bnxt_rfs_supported(bp);
- if (!(bp->flags & BNXT_FLAG_MSIX_CAP) || !bnxt_can_reserve_rings(bp))
+ if (!(bp->flags & BNXT_FLAG_MSIX_CAP) || !bnxt_can_reserve_rings(bp) || !bp->rx_nr_rings)
return false;

vnics = 1 + bp->rx_nr_rings;
@@ -13194,10 +13194,9 @@ static int bnxt_init_dflt_ring_mode(stru
goto init_dflt_ring_err;

bp->tx_nr_rings_per_tc = bp->tx_nr_rings;
- if (bnxt_rfs_supported(bp) && bnxt_rfs_capable(bp)) {
- bp->flags |= BNXT_FLAG_RFS;
- bp->dev->features |= NETIF_F_NTUPLE;
- }
+
+ bnxt_set_dflt_rfs(bp);
+
init_dflt_ring_err:
bnxt_ulp_irq_restart(bp, rc);
return rc;

\
 
 \ /
  Last update: 2022-05-10 16:27    [W:0.474 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site