lkml.org 
[lkml]   [2022]   [May]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: RFC: Memory Tiering Kernel Interfaces
On Sun, 1 May 2022, Davidlohr Bueso wrote:

> Nice summary, thanks. I don't know who of the interested parties will be
> at lsfmm, but fyi we have a couple of sessions on memory tiering Tuesday
> at 14:00 and 15:00.
>
> On Fri, 29 Apr 2022, Wei Xu wrote:
>
> > The current kernel has the basic memory tiering support: Inactive
> > pages on a higher tier NUMA node can be migrated (demoted) to a lower
> > tier NUMA node to make room for new allocations on the higher tier
> > NUMA node. Frequently accessed pages on a lower tier NUMA node can be
> > migrated (promoted) to a higher tier NUMA node to improve the
> > performance.
>
> Regardless of the promotion algorithm, at some point I see the NUMA hinting
> fault mechanism being in the way of performance. It would be nice if hardware
> began giving us page "heatmaps" instead of having to rely on faulting or
> sampling based ways to identify hot memory.
>

Hi Davidlohr,

I tend to agree with this and we've been discussing potential hardware
assistance for page heatmaps as well, but not as an extension of sampling
techniques that rely on the page table Accessed bit.

Have you thought about what hardware could give us here that would allow
us to identify the set of hottest (or coldest) pages over a range so that
we don't need to iterate through it?

Adding Yuanchu Xie <yuanchu@google.com> who has been looking into this
recently.

> > A tiering relationship between NUMA nodes in the form of demotion path
> > is created during the kernel initialization and updated when a NUMA
> > node is hot-added or hot-removed. The current implementation puts all
> > nodes with CPU into the top tier, and then builds the tiering hierarchy
> > tier-by-tier by establishing the per-node demotion targets based on
> > the distances between nodes.
> >
> > The current memory tiering interface needs to be improved to address
> > several important use cases:
> >
> > * The current tiering initialization code always initializes
> > each memory-only NUMA node into a lower tier. But a memory-only
> > NUMA node may have a high performance memory device (e.g. a DRAM
> > device attached via CXL.mem or a DRAM-backed memory-only node on
> > a virtual machine) and should be put into the top tier.
>
> At least the CXL memory (volatile or not) will still be slower than
> regular DRAM, so I think that we'd not want this to be top-tier. But
> in general, yes I agree that defining top tier as whether or not the
> node has a CPU a bit limiting, as you've detailed here.
>
> > Tiering Hierarchy Initialization
> > ================================
> >
> > By default, all memory nodes are in the top tier (N_TOPTIER_MEMORY).
> >
> > A device driver can remove its memory nodes from the top tier, e.g.
> > a dax driver can remove PMEM nodes from the top tier.
> >
> > The kernel builds the memory tiering hierarchy and per-node demotion
> > order tier-by-tier starting from N_TOPTIER_MEMORY. For a node N, the
> > best distance nodes in the next lower tier are assigned to
> > node_demotion[N].preferred and all the nodes in the next lower tier
> > are assigned to node_demotion[N].allowed.
> >
> > node_demotion[N].preferred can be empty if no preferred demotion node
> > is available for node N.
>
> Upon cases where there more than one possible demotion node (with equal
> cost), I'm wondering if we want to do something better than choosing
> randomly, like we do now - perhaps round robin? Of course anything
> like this will require actual performance data, something I have seen
> very little of.
>
> > Memory tiering hierarchy is rebuilt upon hot-add or hot-remove of a
> > memory node, but is NOT rebuilt upon hot-add or hot-remove of a CPU
> > node.
>
> I think this makes sense.
>
> Thanks,
> Davidlohr
>
>

\
 
 \ /
  Last update: 2022-05-02 03:05    [W:0.202 / U:0.696 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site