lkml.org 
[lkml]   [2022]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] dt-bindings: wkup-m3-ipc: Add vtt toggle bindings
Date
Document the Wakeup M3 IPC properties that can be used to toggle the VTT
regulator during low power mode transitions.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
[dfustini: converted to YAML]
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
---
.../bindings/soc/ti/wkup-m3-ipc.yaml | 21 +++++++++++++++++++
1 file changed, 21 insertions(+)

diff --git a/Documentation/devicetree/bindings/soc/ti/wkup-m3-ipc.yaml b/Documentation/devicetree/bindings/soc/ti/wkup-m3-ipc.yaml
index d855c01ce61c..6a8fcad8b2fd 100644
--- a/Documentation/devicetree/bindings/soc/ti/wkup-m3-ipc.yaml
+++ b/Documentation/devicetree/bindings/soc/ti/wkup-m3-ipc.yaml
@@ -24,6 +24,16 @@ description: |+
A wkup_m3_ipc device node is used to represent the IPC registers within an
SoC.

+ Support for VTT Toggle
+ ==================================
+ In order to enable the support for VTT toggle during Suspend/Resume sequence
+ needed by some boards (like AM335x EVM-SK & AM437x GP EVM), the vtt properties
+ below are required. It is possible to toggle VTT using one of two methods
+ depending on the SoC being used, either GPIO0 toggle (AM335x and AM437x), or
+ any GPIO with DS_PAD_CONFIG bits in the control module (AM437x only). Please
+ note that only pins on the GPIO0 module can be used for GPIO toggle. It will
+ not work with any other GPIO module.
+
properties:
compatible:
enum:
@@ -51,6 +61,15 @@ properties:
mbox_wkupm3 child node.
maxItems: 1

+ ti,needs-vtt-toggle:
+ type: boolean
+ description: boards requires VTT toggling during suspend/resume
+
+ ti,vtt-gpio-pin:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: pin on the GPIO0 module used for VTT toggle
+ maxItems: 1
+
required:
- compatible
- reg
@@ -76,6 +95,8 @@ examples:
interrupts = <78>;
ti,rproc = <&wkup_m3>;
mboxes = <&mailbox &mbox_wkupm3>;
+ ti,needs-vtt-toggle;
+ ti,vtt-gpio-pin = <7>;
};
};
...
--
2.32.0
\
 
 \ /
  Last update: 2022-09-17 16:21    [W:0.055 / U:0.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site