lkml.org 
[lkml]   [2022]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCHv4 5/8] x86/mm: Reserve unaccepted memory bitmap
    On Fri, Apr 08, 2022 at 11:08:48AM -0700, Dave Hansen wrote:
    > On 4/5/22 16:43, Kirill A. Shutemov wrote:
    > > A given page of memory can only be accepted once. The kernel has a need
    > > to accept memory both in the early decompression stage and during normal
    > > runtime.
    > >
    > > A bitmap used to communicate the acceptance state of each page between the
    > > decompression stage and normal runtime. This eliminates the possibility of
    > > attempting to double-accept a page.
    >
    > ... which is fatal, right? Could you include that an also the rationale
    > for why it is fatal?

    Actually, no. For TDX, TDX_ACCEPT_PAGE would just return an error. It is
    not fatal, but it indicates that there is security hole. VMM can clear the
    range of the memory if it can trick the guest to re-accept the memory
    blindly:

    1. VMM removes the memory range from the guest. VMM can do it at any
    point.
    2. VMM re-adds memory for the same range of the guest physical addresses.
    3. VMM tricks guest into re-accepting this memory blindly. It makes the
    range of guest physical memory filled with 0.
    4. ???
    5. PROFIT!

    TDX relies on guest to be careful with accepting memory and only do this
    for memory that is not in use.

    This patchet is designed to keep unaccepted
    memory accounted and prevent such double accpept.


    > > The bitmap is allocated in EFI stub, decompression stage updates the state
    > > of pages used for the kernel and initrd and hands the bitmap over to the
    > > main kernel image via boot_params.
    >
    > This is really good info. Could we maybe expand it a bit?
    >
    > There are several steps in the bitmap's lifecycle:
    > 1. Bitmap is allocated in the EFI stub

    Allocated and populated.

    > 2. The kernel decompression code locates it, accepts some pages before
    > decompression and marks them in the bitmap.
    > 3. Decompression code points to the bitmap via a boot_param

    Actually EFI stub makes boot_param point to the bitmap. Decompression code
    and main kernel consume it from there.

    > 4. Main kernel locates bitmap via the boot_param and uses it to guide
    > runtime acceptance decisions.
    >
    > > In the runtime kernel, reserve the bitmap's memory to ensure nothing
    > > overwrites it.
    > >
    > > Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
    > > Acked-by: Mike Rapoport <rppt@linux.ibm.com>
    > > ---
    > > arch/x86/kernel/e820.c | 10 ++++++++++
    > > 1 file changed, 10 insertions(+)
    > >
    > > diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
    > > index f267205f2d5a..22d1fe48dcba 100644
    > > --- a/arch/x86/kernel/e820.c
    > > +++ b/arch/x86/kernel/e820.c
    > > @@ -1316,6 +1316,16 @@ void __init e820__memblock_setup(void)
    > > int i;
    > > u64 end;
    > >
    > > + /* Mark unaccepted memory bitmap reserved */
    > > + if (boot_params.unaccepted_memory) {
    > > + unsigned long size;
    > > +
    > > + /* One bit per 2MB */
    > > + size = DIV_ROUND_UP(e820__end_of_ram_pfn() * PAGE_SIZE,
    > > + PMD_SIZE * BITS_PER_BYTE);
    > > + memblock_reserve(boot_params.unaccepted_memory, size);
    > > + }
    >
    > One oddity here: The size is implied by the e820's contents. Did you
    > mention somewhere that unaccepted memory is considered E820_TYPE_RAM?
    > It *has* to be in order for e820__end_of_ram_pfn() to work, right?

    "e820_type = E820_TYPE_RAM;" for "case EFI_UNACCEPTED_MEMORY:" in patch
    3/8 does this.

    I didn't wrote down it explitictly. I will.

    --
    Kirill A. Shutemov

    \
     
     \ /
      Last update: 2022-04-09 22:42    [W:2.914 / U:0.352 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site