Messages in this thread | | | Date | Fri, 8 Apr 2022 09:16:37 +0200 | Subject | Re: [PATCH v3 1/4] dt-bindings: timer: exynos4210-mct: Add ARTPEC-8 MCT support | From | Krzysztof Kozlowski <> |
| |
On 07/04/2022 09:44, Vincent Whitchurch wrote: > The ARTPEC-8 has an MCT with 4 global and 8 local timer interrupts. > > The SoC has a quad-core Cortex-A53 and a single-core Cortex-A5 which > share one MCT with one global and eight local timers. The Cortex-A53 > and Cortex-A5 do not have cache-coherency between them, and therefore > run two separate kernels. > > The Cortex-A53 boots first and starts the global free-running counter > and also registers a clock events device using the global timer. (This > global timer clock events is usually replaced by arch timer clock events > for each of the cores.) > > When the A5 boots (via the A53), it should not use the global timer > interrupts or write to the global timer registers. This is because even > if there are four global comparators, the control bits for all four are > in the same registers, and we would need to synchronize between the > cpus. Instead, the global timer FRC (already started by the A53) should > be used as the clock source, and one of the local timers which are not > used by the A53 can be used for clock events on the A5. > > To support this hardware, add a compatible for the MCT as well as two > new properties to describe the hardware-mandated sharing of the FRC and > dedicating local timers to specific processors. > > Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> > --- >
This is rebased on my patch: https://lore.kernel.org/lkml/20220407194127.19004-1-krzysztof.kozlowski@linaro.org/
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards, Krzysztof
| |