lkml.org 
[lkml]   [2022]   [Apr]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 10/14] dt-bindings: reset: snps,hsdk-reset: Convert to yaml
On Thu, Apr 07, 2022 at 05:43:34PM +0200, Philipp Zabel wrote:
> Convert the device tree bindings for the Synopsys HSDK reset controller
> to YAML schema to allow participating in DT validation.
>
> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
> Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
> ---
> .../bindings/reset/snps,hsdk-reset.txt | 28 -----------
> .../bindings/reset/snps,hsdk-reset.yaml | 47 +++++++++++++++++++
> 2 files changed, 47 insertions(+), 28 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt
> create mode 100644 Documentation/devicetree/bindings/reset/snps,hsdk-reset.yaml
>
> diff --git a/Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt b/Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt
> deleted file mode 100644
> index 830069b1c37c..000000000000
> --- a/Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt
> +++ /dev/null
> @@ -1,28 +0,0 @@
> -Binding for the Synopsys HSDK reset controller
> -
> -This binding uses the common reset binding[1].
> -
> -[1] Documentation/devicetree/bindings/reset/reset.txt
> -
> -Required properties:
> -- compatible: should be "snps,hsdk-reset".
> -- reg: should always contain 2 pairs address - length: first for reset
> - configuration register and second for corresponding SW reset and status bits
> - register.
> -- #reset-cells: from common reset binding; Should always be set to 1.
> -
> -Example:
> - reset: reset@880 {
> - compatible = "snps,hsdk-reset";
> - #reset-cells = <1>;
> - reg = <0x8A0 0x4>, <0xFF0 0x4>;
> - };
> -
> -Specifying reset lines connected to IP modules:
> - ethernet@.... {
> - ....
> - resets = <&reset HSDK_V1_ETH_RESET>;
> - ....
> - };
> -
> -The index could be found in <dt-bindings/reset/snps,hsdk-reset.h>
> diff --git a/Documentation/devicetree/bindings/reset/snps,hsdk-reset.yaml b/Documentation/devicetree/bindings/reset/snps,hsdk-reset.yaml
> new file mode 100644
> index 000000000000..a7cb5580c070
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/reset/snps,hsdk-reset.yaml
> @@ -0,0 +1,47 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/reset/snps,hsdk-reset.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Synopsys HSDK reset controller
> +
> +maintainers:
> + - Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
> +
> +properties:
> + compatible:
> + const: snps,hsdk-reset
> +
> + reg:
> + minItems: 2
> + maxItems: 2
> + description: |
> + Should always contain 2 pairs address - length: first for reset
> + configuration register and second for corresponding SW reset and status
> + bits register.

items:
- description: reset configuration register
- description: corresponding SW reset and status bits register


> +
> + '#reset-cells':
> + const: 1
> +
> +required:
> + - compatible
> + - reg
> + - '#reset-cells'
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/reset/snps,hsdk-reset.h>
> +
> + reset: reset@880 {
> + compatible = "snps,hsdk-reset";
> + #reset-cells = <1>;
> + reg = <0x8A0 0x4>, <0xFF0 0x4>;
> + };
> +
> + // Specifying reset lines connected to IP modules:
> + ethernet {
> + resets = <&reset HSDK_ETH_RESET>;
> + };

No need to show the consumer side in every provider. Please drop.

Rob

\
 
 \ /
  Last update: 2022-04-08 23:16    [W:0.309 / U:0.412 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site