lkml.org 
[lkml]   [2022]   [Apr]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [V3] drivers/tty/serial/qcom-geni-serial: Do stop_rx in suspend path for console if console_suspend is disabled
From
On 07. 04. 22, 9:25, Vijaya Krishna Nivarthi wrote:
> For the case of console_suspend disabled, if back to back suspend/resume
> test is executed, at the end of test, sometimes console would appear to
> be frozen not responding to input. This would happen because, for
> console_suspend disabled, suspend/resume routines only turn resources
> off/on but don't do a port close/open.
> As a result, during resume, some rx transactions come in before system is
> ready, malfunction of rx happens in turn resulting in console appearing
> to be stuck.
>
> Do a stop_rx in suspend sequence to prevent this. start_rx is already
> present in resume sequence as part of call to set_termios which does a
> stop_rx/start_rx.

So why is it OK for every other driver? Should uart_suspend_port() be
fixed instead?

> Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
> ---
> v3: swapped the order of conditions to be more human readable
> v2: restricted patch to contain only stop_rx in suspend sequence
> v1: intial patch contained 2 additional unrelated changes in vicinity
> ---
> drivers/tty/serial/qcom_geni_serial.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
> index 1543a60..53723d2 100644
> --- a/drivers/tty/serial/qcom_geni_serial.c
> +++ b/drivers/tty/serial/qcom_geni_serial.c
> @@ -1481,6 +1481,10 @@ static int __maybe_unused qcom_geni_serial_sys_suspend(struct device *dev)
> struct uart_port *uport = &port->uport;
> struct qcom_geni_private_data *private_data = uport->private_data;
>
> + /* do a stop_rx here, start_rx is handled in uart_resume_port by call to setermios */
> + if (uart_console(uport) && !console_suspend_enabled)
> + uport->ops->stop_rx(uport);
> +
> /*
> * This is done so we can hit the lowest possible state in suspend
> * even with no_console_suspend

thanks,
--
js
suse labs

\
 
 \ /
  Last update: 2022-04-07 17:31    [W:0.056 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site