lkml.org 
[lkml]   [2022]   [Apr]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Date
    Subject[PATCH v6 01/21] lib/scatterlist: add flag for indicating P2PDMA segments in an SGL
    Make use of the third free LSB in scatterlist's page_link on 64bit systems.

    The extra bit will be used by dma_[un]map_sg_p2pdma() to determine when a
    given SGL segments dma_address points to a PCI bus address.
    dma_unmap_sg_p2pdma() will need to perform different cleanup when a
    segment is marked as a bus address.

    The new bit will only be used when CONFIG_PCI_P2PDMA is set; this means
    PCI P2PDMA will require CONFIG_64BIT. This should be acceptable as the
    majority of P2PDMA use cases are restricted to newer root complexes and
    roughly require the extra address space for memory BARs used in the
    transactions.

    Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
    Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
    ---
    drivers/pci/Kconfig | 5 +++++
    include/linux/scatterlist.h | 44 ++++++++++++++++++++++++++++++++++++-
    2 files changed, 48 insertions(+), 1 deletion(-)

    diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
    index 133c73207782..5cc7cba1941f 100644
    --- a/drivers/pci/Kconfig
    +++ b/drivers/pci/Kconfig
    @@ -164,6 +164,11 @@ config PCI_PASID
    config PCI_P2PDMA
    bool "PCI peer-to-peer transfer support"
    depends on ZONE_DEVICE
    + #
    + # The need for the scatterlist DMA bus address flag means PCI P2PDMA
    + # requires 64bit
    + #
    + depends on 64BIT
    select GENERIC_ALLOCATOR
    help
    Enableѕ drivers to do PCI peer-to-peer transactions to and from
    diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h
    index 7ff9d6386c12..6561ca8aead8 100644
    --- a/include/linux/scatterlist.h
    +++ b/include/linux/scatterlist.h
    @@ -64,12 +64,24 @@ struct sg_append_table {
    #define SG_CHAIN 0x01UL
    #define SG_END 0x02UL

    +/*
    + * bit 2 is the third free bit in the page_link on 64bit systems which
    + * is used by dma_unmap_sg() to determine if the dma_address is a
    + * bus address when doing P2PDMA.
    + */
    +#ifdef CONFIG_PCI_P2PDMA
    +#define SG_DMA_BUS_ADDRESS 0x04UL
    +static_assert(__alignof__(struct page) >= 8);
    +#else
    +#define SG_DMA_BUS_ADDRESS 0x00UL
    +#endif
    +
    /*
    * We overload the LSB of the page pointer to indicate whether it's
    * a valid sg entry, or whether it points to the start of a new scatterlist.
    * Those low bits are there for everyone! (thanks mason :-)
    */
    -#define SG_PAGE_LINK_MASK (SG_CHAIN | SG_END)
    +#define SG_PAGE_LINK_MASK (SG_CHAIN | SG_END | SG_DMA_BUS_ADDRESS)

    static inline unsigned int __sg_flags(struct scatterlist *sg)
    {
    @@ -91,6 +103,11 @@ static inline bool sg_is_last(struct scatterlist *sg)
    return __sg_flags(sg) & SG_END;
    }

    +static inline bool sg_is_dma_bus_address(struct scatterlist *sg)
    +{
    + return __sg_flags(sg) & SG_DMA_BUS_ADDRESS;
    +}
    +
    /**
    * sg_assign_page - Assign a given page to an SG entry
    * @sg: SG entry
    @@ -245,6 +262,31 @@ static inline void sg_unmark_end(struct scatterlist *sg)
    sg->page_link &= ~SG_END;
    }

    +/**
    + * sg_dma_mark_bus address - Mark the scatterlist entry as a bus address
    + * @sg: SG entryScatterlist
    + *
    + * Description:
    + * Marks the passed in sg entry to indicate that the dma_address is
    + * a bus address and doesn't need to be unmapped.
    + **/
    +static inline void sg_dma_mark_bus_address(struct scatterlist *sg)
    +{
    + sg->page_link |= SG_DMA_BUS_ADDRESS;
    +}
    +
    +/**
    + * sg_unmark_pci_p2pdma - Unmark the scatterlist entry as a bus address
    + * @sg: SG entryScatterlist
    + *
    + * Description:
    + * Clears the bus address mark.
    + **/
    +static inline void sg_dma_unmark_bus_address(struct scatterlist *sg)
    +{
    + sg->page_link &= ~SG_DMA_BUS_ADDRESS;
    +}
    +
    /**
    * sg_phys - Return physical address of an sg entry
    * @sg: SG entry
    --
    2.30.2
    \
     
     \ /
      Last update: 2022-04-07 21:26    [W:5.618 / U:0.384 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site