Messages in this thread | | | Date | Wed, 6 Apr 2022 15:01:16 +0200 | Subject | Re: [PATCH v4 00/15] Move HEVC stateless controls out of staging | From | Benjamin Gaignard <> |
| |
Le 06/04/2022 à 14:55, Adam Ford a écrit : > On Wed, Apr 6, 2022 at 7:50 AM Benjamin Gaignard > <benjamin.gaignard@collabora.com> wrote: >> >> Le 06/04/2022 à 14:46, Adam Ford a écrit : >>> On Wed, Apr 6, 2022 at 7:41 AM Benjamin Gaignard >>> <benjamin.gaignard@collabora.com> wrote: >>>> Le 06/04/2022 à 14:28, Adam Ford a écrit : >>>>> On Wed, Apr 6, 2022 at 1:56 AM Benjamin Gaignard >>>>> <benjamin.gaignard@collabora.com> wrote: >>>>>> Le 05/04/2022 à 23:27, Adam Ford a écrit : >>>>>>> On Mon, Apr 4, 2022 at 10:56 AM Benjamin Gaignard >>>>>>> <benjamin.gaignard@collabora.com> wrote: >>>>>>>> Le 02/04/2022 à 18:59, Adam Ford a écrit : >>>>>>>>> On Sat, Apr 2, 2022 at 11:22 AM Adam Ford <aford173@gmail.com> wrote: >>>>>>>>>> On Fri, Apr 1, 2022 at 8:18 AM Benjamin Gaignard >>>>>>>>>> <benjamin.gaignard@collabora.com> wrote: >>>>>>>>>>> Le 31/03/2022 à 08:53, Benjamin Gaignard a écrit : >>>>>>>>>>>> Le 30/03/2022 à 20:52, Adam Ford a écrit : >>>>>>>>>>>>> On Wed, Mar 30, 2022 at 2:53 AM Benjamin Gaignard >>>>>>>>>>>>> <benjamin.gaignard@collabora.com> wrote: >>>>>>>>>>>>>> Le 28/02/2022 à 15:08, Benjamin Gaignard a écrit : >>>>>>>>>>>>>>> This series aims to make HEVC uapi stable and usable for hardware >>>>>>>>>>>>>>> decoder. HEVC uapi is used by 2 mainlined drivers (Cedrus and Hantro) >>>>>>>>>>>>>>> and 2 out of the tree drivers (rkvdec and RPI). >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> After the remarks done on version 2, I have completely reworked to >>>>>>>>>>>>>>> patches >>>>>>>>>>>>>>> split so changelogs are meaningless. I have also drop "RFC" from the >>>>>>>>>>>>>>> titles. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Version 4: >>>>>>>>>>>>>>> - Add num_entry_point_offsets field in struct >>>>>>>>>>>>>>> v4l2_ctrl_hevc_slice_params >>>>>>>>>>>>>>> - Fix V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS name >>>>>>>>>>>>>>> - Initialize control V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS >>>>>>>>>>>>>>> - Fix space/tab issue in kernel-doc >>>>>>>>>>>>>>> - Add patch to change data_bit_offset definition >>>>>>>>>>>>>>> - Fix hantro-media SPDX license >>>>>>>>>>>>>>> - put controls under stateless section in v4l2-ctrls-defs.c >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> At the end fluster tests results on IMX8MQ is 77/147 for HEVC codec. >>>>>>>>>>>>>> Dear reviewers, >>>>>>>>>>>>>> >>>>>>>>>>>>>> This series is waiting for your feedback, >>>>>>>>>>>>> I tried several times with the suggested repos for both the kernel and >>>>>>>>>>>>> g-streamer without success getting Fluster to pass any tests on the >>>>>>>>>>>>> imx8mq. I can try again but I likely won't get to it until this >>>>>>>>>>>>> weekend. If I can get it working, I'll test both the 8mq and 8mm. >>>>>>>>>>>> Thanks a lot for that. >>>>>>>>>>>> >>>>>>>>>>>> Benjamin >>>>>>>>>>> Adam, >>>>>>>>>>> >>>>>>>>>>> You may need to check if h265parse and v4l2slh265dec are available on your board. >>>>>>>>>> I ran gst-inspect to see what showed up with 265 in the name. >>>>>>>>>> >>>>>>>>>> # gst-inspect-1.0 |grep 265 >>>>>>>>>> libav: avdec_h265: libav HEVC (High Efficiency Video Coding) decoder >>>>>>>>>> rtp: rtph265depay: RTP H265 depayloader >>>>>>>>>> rtp: rtph265pay: RTP H265 payloader >>>>>>>>>> typefindfunctions: video/x-h265: h265, x265, 265 >>>>>>>>>> v4l2codecs: v4l2slh265dec: V4L2 Stateless H.265 Video Decoder >>>>>>>>>> videoparsersbad: h265parse: H.265 parser >>>>>>>>>> >>>>>>>>>> It appears I have both h265parse and v4l2slh265dec. >>>>>>>>>> >>>>>>>>>>> fluster check if v4l2slh265dec is working fine with this command line: >>>>>>>>>>> >>>>>>>>>>> gst-launch-1.0 appsrc num-buffers=0 ! h265parse ! v4l2slh265dec ! fakesink >>>>>>>>>>> >>>>>>>>>>> so if one of them is missing it won't work. >>>>>>>>>> gst-launch-1.0 appsrc num-buffers=0 ! h265parse ! v4l2slh265dec ! fakesink >>>>>>>>>> Setting pipeline to PAUSED ... >>>>>>>>>> 0:00:00.098389938 526 0xaaaaf9d86ac0 ERROR v4l2codecs-decoder >>>>>>>>>> gstv4l2decoder.c:725:gst_v4l2_decoder_get_controls:<v4l2decoder2> >>>>>>>>>> VIDIOC_G_EXT_CTRLS failed: Invalid argument >>>>>>>>>> ERROR: from element >>>>>>>>>> /GstPipeline:pipeline0/v4l2slh265dec:v4l2slh265dec0: Driver did not >>>>>>>>>> report framing and start code method. >>>>>>>>>> Additional debug info: >>>>>>>>>> ../subprojects/gst-plugins-bad/sys/v4l2codecs/gstv4l2codech265dec.c(155): >>>>>>>>>> gst_v4l2_codec_h265_dec_open (): >>>>>>>>>> /GstPipeline:pipeline0/v4l2slh265dec:v4l2slh265dec0: >>>>>>>>>> gst_v4l2_decoder_get_controls() failed: Invalid argument >>>>>>>>>> ERROR: pipeline doesn't want to preroll. >>>>>>>>>> ERROR: from element >>>>>>>>>> /GstPipeline:pipeline0/v4l2slh265dec:v4l2slh265dec0: Could not >>>>>>>>>> initialize supporting library. >>>>>>>>>> Additional debug info: >>>>>>>>>> ../subprojects/gst-plugins-base/gst-libs/gst/video/gstvideodecoder.c(2909): >>>>>>>>>> gst_video_decoder_change_state (): >>>>>>>>>> /GstPipeline:pipeline0/v4l2slh265dec:v4l2slh265dec0: >>>>>>>>>> Failed to open decoder >>>>>>>>>> ERROR: pipeline doesn't want to preroll. >>>>>>>>>> Failed to set pipeline to PAUSED. >>>>>>>>>> Setting pipeline to NULL ... >>>>>>>>>> Freeing pipeline ... >>>>>>>>>> >>>>>>>>>> Does this mean I have a wrong version of the kernel and/or incomplete patches? >>>>>>>>> I double checked the branches. >>>>>>>>> >>>>>>>>> Kernel: >>>>>>>>> https://gitlab.collabora.com/benjamin.gaignard/for-upstream.git >>>>>>>>> branch: origin/HEVC_UAPI_V4 >>>>>>>>> >>>>>>>>> Gstreamer: >>>>>>>>> https://gitlab.freedesktop.org/benjamin.gaignard1/gstreamer.git >>>>>>>>> branch: origin/benjamin.gaignard1/gstreamer-HEVC_aligned_with_kernel_5.15 >>>>>>>>> >>>>>>>>> >>>>>>>>> I am still not able to run h.265/HEVC tests. >>>>>>>> Hello Adam, >>>>>>>> >>>>>>>> I have updated the following branches with the versions I have used today: >>>>>>>> >>>>>>>> Kernel: >>>>>>>> https://gitlab.collabora.com/benjamin.gaignard/for-upstream.git >>>>>>>> branch: origin/HEVC_UAPI_V5 only one change in documentation vs version 4 but rebased in v5.18-rc1 >>>>>>>> >>>>>>>> Gstreamer: >>>>>>>> https://gitlab.freedesktop.org/benjamin.gaignard1/gstreamer.git >>>>>>>> branch: origin/benjamin.gaignard1/gstreamer-HEVC_aligned_with_kernel_5.15 updated on the latest GST main branch >>>>>>>> >>>>>>>> I hope this will work fine this time. >>>>>>> I wish I had better news for you: >>>>>>> >>>>>>> dmesg shows the hantro driver is being loaded: >>>>>>> >>>>>>> [ 38.612243] hantro-vpu 38300000.video-codec: registered >>>>>>> nxp,imx8mq-vpu-g1-dec as /dev/video0 >>>>>>> [ 38.612618] hantro-vpu 38310000.video-codec: registered >>>>>>> nxp,imx8mq-vpu-g2-dec as /dev/video1 >>>>>>> >>>>>>> # gst-inspect-1.0 |grep 265 >>>>>>> libav: avdec_h265: libav HEVC (High Efficiency Video Coding) decoder >>>>>>> rtp: rtph265depay: RTP H265 depayloader >>>>>>> rtp: rtph265pay: RTP H265 payloader >>>>>>> typefindfunctions: video/x-h265: h265, x265, 265 >>>>>>> v4l2codecs: v4l2slh265dec: V4L2 Stateless H.265 Video Decoder >>>>>>> videoparsersbad: h265parse: H.265 parser >>>>>>> >>>>>>> Fluster reports: >>>>>>> GStreamer-H.265-V4L2SL-Gst1.0: GStreamer H.265 V4L2SL decoder for >>>>>>> GStreamer 1.0... ❌ >>>>>> Still the same error about non supported control ? >>>>> # gst-lagst-launch-1.0 appsrc num-buffers=0 ! h265parse ! >>>>> v4l2slh265dec ! fakesink >>>>> Setting pipeline to PAUSED ... >>>>> 0:00:01.704385508 420 0xaaaaec0a76c0 ERROR v4l2codecs-decoder >>>>> gstv4l2decoder.c:725:gst_v4l2_decoder_get_controls:<v4l2decoder2> >>>>> VIDIOC_G_EXT_CTRLS failed: Invalid argument >>>>> ERROR: from element >>>>> /GstPipeline:pipeline0/v4l2slh265dec:v4l2slh265dec0: Driver did not >>>>> report framing and start code method. >>>>> Additional debug info: >>>>> ../subprojects/gst-plugins-bad/sys/v4l2codecs/gstv4l2codech265dec.c(155): >>>>> gst_v4l2_codec_h265_dec_open (): >>>>> /GstPipeline:pipeline0/v4l2slh265dec:v4l2slh265dec0: >>>>> gst_v4l2_decoder_get_controls() failed: Invalid argument >>>>> ERROR: pipeline doesn't want to preroll. >>>>> ERROR: from element >>>>> /GstPipeline:pipeline0/v4l2slh265dec:v4l2slh265dec0: Could not >>>>> initialize supporting library. >>>>> Additional debug info: >>>>> ../subprojects/gst-plugins-base/gst-libs/gst/video/gstvideodecoder.c(2909): >>>>> gst_video_decoder_change_state (): >>>>> /GstPipeline:pipeline0/v4l2slh265dec:v4l2slh265dec0: >>>>> Failed to open decoder >>>>> ERROR: pipeline doesn't want to preroll. >>>>> Failed to set pipeline to PAUSED. >>>>> Setting pipeline to NULL ... >>>>> Freeing pipeline ... >>>> What is the result of v4l2-ctl ? >>>> Here I have: >>>> v4l2-ctl --all -d 1 >>>> Driver Info: >>>> Driver name : hantro-vpu >>>> Card type : nxp,imx8mq-vpu-g2-dec >>>> Bus info : platform: hantro-vpu >>>> Driver version : 5.18.0 >>>> Capabilities : 0x84204000 >>>> Video Memory-to-Memory Multiplanar >>>> Streaming >>>> Extended Pix Format >>>> Device Capabilities >>>> Device Caps : 0x04204000 >>>> Video Memory-to-Memory Multiplanar >>>> Streaming >>>> Extended Pix Format >>>> Media Driver Info: >>>> Driver name : hantro-vpu >>>> Model : hantro-vpu >>>> Serial : >>>> Bus info : platform: hantro-vpu >>>> Media version : 5.18.0 >>>> Hardware revision: 0x00000000 (0) >>>> Driver version : 5.18.0 >>>> Interface Info: >>>> ID : 0x0300000c >>>> Type : V4L Video >>>> Entity Info: >>>> ID : 0x00000001 (1) >>>> Name : nxp,imx8mq-vpu-g2-dec-source >>>> Function : V4L2 I/O >>>> Pad 0x01000002 : 0: Source >>>> Link 0x02000008: to remote pad 0x1000004 of entity 'nxp,imx8mq-vpu-g2-dec-proc': Data, Enabled, Immutable >>>> Priority: 2 >>>> Format Video Capture Multiplanar: >>>> Width/Height : 48/48 >>>> Pixel Format : 'VT12' (Y/CbCr 4:2:0 (4x4 Linear)) >>>> Field : None >>>> Number of planes : 1 >>>> Flags : >>>> Colorspace : JPEG >>>> Transfer Function : Default >>>> YCbCr/HSV Encoding: Default >>>> Quantization : Default >>>> Plane 0 : >>>> Bytes per Line : 48 >>>> Size Image : 3600 >>>> Format Video Output Multiplanar: >>>> Width/Height : 48/48 >>>> Pixel Format : 'S265' (HEVC Parsed Slice Data) >>>> Field : None >>>> Number of planes : 1 >>>> Flags : >>>> Colorspace : JPEG >>>> Transfer Function : Default >>>> YCbCr/HSV Encoding: Default >>>> Quantization : Default >>>> Plane 0 : >>>> Bytes per Line : 0 >>>> Size Image : 4608 >>>> >>>> User Controls >>>> >>>> hantro_hevc_slice_header_skip_b 0x00981a80 (int) : min=0 max=256 step=1 default=0 value=0 >>>> >>>> Codec Controls >>>> >>>> hevc_profile 0x00990b67 (menu) : min=0 max=2 default=0 value=0 >>>> 0: Main >>>> 1: Main Still Picture >>>> 2: Main 10 >>>> hevc_level 0x00990b68 (menu) : min=0 max=8 default=0 value=0 >>>> 0: 1 >>>> 1: 2 >>>> 2: 2.1 >>>> 3: 3 >>>> 4: 3.1 >>>> 5: 4 >>>> 6: 4.1 >>>> 7: 5 >>>> 8: 5.1 >>>> >>>> Stateless Codec Controls >>>> >>>> vp9_frame_decode_parameters 0x00a40a2c (unknown): type=261 flags=has-payload >>>> vp9_probabilities_updates 0x00a40a2d (unknown): type=260 flags=has-payload >>>> hevc_sequence_parameter_set 0x00a40a90 (unknown): type=270 flags=has-payload >>>> hevc_picture_parameter_set 0x00a40a91 (unknown): type=271 flags=has-payload >>>> hevc_scaling_matrix 0x00a40a93 (unknown): type=273 flags=has-payload >>>> hevc_decode_parameters 0x00a40a94 (unknown): type=274 flags=has-payload >>>> hevc_decode_mode 0x00a40a95 (menu) : min=1 max=1 default=1 value=1 >>>> 1: Frame-Based >>>> hevc_start_code 0x00a40a96 (menu) : min=1 max=1 default=1 value=1 >>>> 1: Annex B Start Code >>>> >>> Mine looks like: >>> >>> # v4l2-ctl --all -d 1 >>> Driver Info: >>> Driver name : hantro-vpu >>> Card type : nxp,imx8mq-vpu-g2-dec >>> Bus info : platform: hantro-vpu >>> Driver version : 5.18.0 >>> Capabilities : 0x84204000 >>> Video Memory-to-Memory Multiplanar >>> Streaming >>> Extended Pix Format >>> Device Capabilities >>> Device Caps : 0x04204000 >>> Video Memory-to-Memory Multiplanar >>> Streaming >>> Extended Pix Format >>> Media Driver Info: >>> Driver name : hantro-vpu >>> Model : hantro-vpu >>> Serial : >>> Bus info : platform: hantro-vpu >>> Media version : 5.18.0 >>> Hardware revision: 0x00000000 (0) >>> Driver version : 5.18.0 >>> Interface Info: >>> ID : 0x0300000c >>> Type : V4L Video >>> Entity Info: >>> ID : 0x00000001 (1) >>> Name : nxp,imx8mq-vpu-g2-dec-source >>> Function : V4L2 I/O >>> Pad 0x01000002 : 0: Source >>> Link 0x02000008: to remote pad 0x1000004 of entity >>> 'nxp,imx8mq-vpu-g2-dec-proc': Data, Enabled, Immutable >>> Priority: 2 >>> Format Video Capture Multiplanar: >>> Width/Height : 48/48 >>> Pixel Format : 'VT12' (Y/CbCr 4:2:0 (4x4 Linear)) >>> Field : None >>> Number of planes : 1 >>> Flags : >>> Colorspace : JPEG >>> Transfer Function : Default >>> YCbCr/HSV Encoding: Default >>> Quantization : Default >>> Plane 0 : >>> Bytes per Line : 48 >>> Size Image : 3600 >>> Format Video Output Multiplanar: >>> Width/Height : 48/48 >>> Pixel Format : 'S265' (HEVC Parsed Slice Data) >>> Field : None >>> Number of planes : 1 >>> Flags : >>> Colorspace : JPEG >>> Transfer Function : Default >>> YCbCr/HSV Encoding: Default >>> Quantization : Default >>> Plane 0 : >>> Bytes per Line : 0 >>> Size Image : 4608 >>> >>> User Controls >>> >>> hantro_hevc_slice_header_skip_b 0x00981a80 (int) : min=0 max=256 >>> step=1 default=0 value=0 >>> >>> Codec Controls >>> >>> hevc_profile 0x00990b67 (menu) : min=0 max=2 >>> default=0 value=0 >>> 0: Main >>> 1: Main Still Picture >>> 2: Main 10 >>> hevc_level 0x00990b68 (menu) : min=0 max=8 >>> default=0 value=0 >>> 0: 1 >>> 1: 2 >>> 2: 2.1 >>> 3: 3 >>> 4: 3.1 >>> 5: 4 >>> 6: 4.1 >>> 7: 5 >>> 8: 5.1 >>> >>> Stateless Codec Controls >>> >>> vp9_frame_decode_parameters 0x00a40a2c (unknown): type=261 flags=has-payload >>> vp9_probabilities_updates 0x00a40a2d (unknown): type=260 flags=has-payload >>> hevc_sequence_parameter_set 0x00a40a90 (unknown): type=270 flags=has-payload >>> hevc_picture_parameter_set 0x00a40a91 (unknown): type=271 flags=has-payload >>> hevc_scaling_matrix 0x00a40a93 (unknown): type=273 flags=has-payload >>> hevc_decode_parameters 0x00a40a94 (unknown): type=274 flags=has-payload >>> hevc_decode_mode 0x00a40a95 (menu) : min=1 max=1 >>> default=1 value=1 >>> 1: Frame-Based >>> hevc_start_code 0x00a40a96 (menu) : min=1 max=1 >>> default=1 value=1 >>> 1: Annex B Start Code >> It is the same so that suggest the issue is coming from GStreamer plugin. > Do I need to build Gtreamer in a special way? I just invoked meson > then ninja, but I didn't pass any additional parameters other than the > build directory name.
Maybe make sure that the plugin is well rebuild ?
On my side I have this version: gst-inspect-1.0 v4l2slh265dec ... Plugin Details: Name v4l2codecs Description V4L2 CODEC Accelerators plugin Filename /home/user/gstreamer/build/subprojects/gst-plugins-bad/sys/v4l2codecs/libgstv4l2codecs.so Version 1.21.0.1 License LGPL Source module gst-plugins-bad Binary package GStreamer Bad Plug-ins git Origin URL Unknown package origin ...
> > adam >>>>>> Benjamin >>>>>> >>>>>>> adam >>>>>>>> Benjamin >>>>>>>> >>>>>>>>> adam >>>>>>>>>> adam >>>>>>>>>>> Regards, >>>>>>>>>>> Benjamin >>>>>>>>>>> >>>>>>>>>>>>> adam >>>>>>>>>>>>>> Thanks, >>>>>>>>>>>>>> Benjamin >>>>>>>>>>>>>> >>>>>>>>>>>>>>> Benjamin >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Benjamin Gaignard (12): >>>>>>>>>>>>>>> media: uapi: HEVC: Add missing fields in HEVC controls >>>>>>>>>>>>>>> media: uapi: HEVC: Rename HEVC stateless controls with STATELESS >>>>>>>>>>>>>>> prefix >>>>>>>>>>>>>>> media: uapi: HEVC: Add document uAPI structure >>>>>>>>>>>>>>> media: uapi: HEVC: Define V4L2_CID_STATELESS_HEVC_SLICE_PARAMS >>>>>>>>>>>>>>> as a >>>>>>>>>>>>>>> dynamic array >>>>>>>>>>>>>>> media: uapi: Move parsed HEVC pixel format out of staging >>>>>>>>>>>>>>> media: uapi: Add V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS >>>>>>>>>>>>>>> control >>>>>>>>>>>>>>> media: uapi: Move the HEVC stateless control type out of staging >>>>>>>>>>>>>>> media: controls: Log HEVC stateless control in .std_log >>>>>>>>>>>>>>> media: uapi: Create a dedicated header for Hantro control >>>>>>>>>>>>>>> media: uapi: HEVC: fix padding in v4l2 control structures >>>>>>>>>>>>>>> media: uapi: Change data_bit_offset definition >>>>>>>>>>>>>>> media: uapi: move HEVC stateless controls out of staging >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Hans Verkuil (3): >>>>>>>>>>>>>>> videodev2.h: add V4L2_CTRL_FLAG_DYNAMIC_ARRAY >>>>>>>>>>>>>>> v4l2-ctrls: add support for dynamically allocated arrays. >>>>>>>>>>>>>>> vivid: add dynamic array test control >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> .../userspace-api/media/drivers/hantro.rst | 5 - >>>>>>>>>>>>>>> .../media/v4l/ext-ctrls-codec-stateless.rst | 833 >>>>>>>>>>>>>>> ++++++++++++++++++ >>>>>>>>>>>>>>> .../media/v4l/ext-ctrls-codec.rst | 780 >>>>>>>>>>>>>>> ---------------- >>>>>>>>>>>>>>> .../media/v4l/pixfmt-compressed.rst | 7 +- >>>>>>>>>>>>>>> .../media/v4l/vidioc-g-ext-ctrls.rst | 20 + >>>>>>>>>>>>>>> .../media/v4l/vidioc-queryctrl.rst | 8 + >>>>>>>>>>>>>>> .../media/videodev2.h.rst.exceptions | 5 + >>>>>>>>>>>>>>> .../media/test-drivers/vivid/vivid-ctrls.c | 15 + >>>>>>>>>>>>>>> drivers/media/v4l2-core/v4l2-ctrls-api.c | 103 ++- >>>>>>>>>>>>>>> drivers/media/v4l2-core/v4l2-ctrls-core.c | 198 ++++- >>>>>>>>>>>>>>> drivers/media/v4l2-core/v4l2-ctrls-defs.c | 37 +- >>>>>>>>>>>>>>> drivers/media/v4l2-core/v4l2-ctrls-priv.h | 3 +- >>>>>>>>>>>>>>> drivers/media/v4l2-core/v4l2-ctrls-request.c | 13 +- >>>>>>>>>>>>>>> drivers/staging/media/hantro/hantro_drv.c | 27 +- >>>>>>>>>>>>>>> drivers/staging/media/hantro/hantro_hevc.c | 8 +- >>>>>>>>>>>>>>> drivers/staging/media/sunxi/cedrus/cedrus.c | 24 +- >>>>>>>>>>>>>>> .../staging/media/sunxi/cedrus/cedrus_dec.c | 10 +- >>>>>>>>>>>>>>> .../staging/media/sunxi/cedrus/cedrus_h265.c | 2 +- >>>>>>>>>>>>>>> include/media/hevc-ctrls.h | 250 ------ >>>>>>>>>>>>>>> include/media/v4l2-ctrls.h | 48 +- >>>>>>>>>>>>>>> include/uapi/linux/hantro-media.h | 19 + >>>>>>>>>>>>>>> include/uapi/linux/v4l2-controls.h | 439 +++++++++ >>>>>>>>>>>>>>> include/uapi/linux/videodev2.h | 13 + >>>>>>>>>>>>>>> 23 files changed, 1697 insertions(+), 1170 deletions(-) >>>>>>>>>>>>>>> delete mode 100644 include/media/hevc-ctrls.h >>>>>>>>>>>>>>> create mode 100644 include/uapi/linux/hantro-media.h >>>>>>>>>>>>>>>
| |