| From | "Kirill A. Shutemov" <> | Subject | [PATCHv8 22/30] x86/boot: Set CR0.NE early and keep it set during the boot | Date | Wed, 6 Apr 2022 02:29:31 +0300 |
| |
TDX guest requires CR0.NE to be set. Clearing the bit triggers #GP(0).
If CR0.NE is 0, the MS-DOS compatibility mode for handling floating-point exceptions is selected. In this mode, the software exception handler for floating-point exceptions is invoked externally using the processor’s FERR#, INTR, and IGNNE# pins.
Using FERR# and IGNNE# to handle floating-point exception is deprecated. CR0.NE=0 also limits newer processors to operate with one logical processor active.
Kernel uses CR0_STATE constant to initialize CR0. It has NE bit set. But during early boot kernel has more ad-hoc approach to setting bit in the register. During some of this ad-hoc manipulation, CR0.NE is cleared. This causes a #GP in TDX guests and makes it die in early boot.
Make CR0 initialization consistent, deriving the initial value of CR0 from CR0_STATE. Since CR0_STATE always has CR0.NE=1, this ensures that CR0.NE is never 0 and avoids the #GP.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> --- arch/x86/boot/compressed/head_64.S | 7 ++++--- arch/x86/realmode/rm/trampoline_64.S | 8 ++++---- 2 files changed, 8 insertions(+), 7 deletions(-)
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S index dea95301196b..7b5d36214352 100644 --- a/arch/x86/boot/compressed/head_64.S +++ b/arch/x86/boot/compressed/head_64.S @@ -289,7 +289,7 @@ SYM_FUNC_START(startup_32) pushl %eax /* Enter paged protected Mode, activating Long Mode */ - movl $(X86_CR0_PG | X86_CR0_PE), %eax /* Enable Paging and Protected mode */ + movl $CR0_STATE, %eax movl %eax, %cr0 /* Jump from 32bit compatibility mode into 64bit mode. */ @@ -661,8 +661,9 @@ SYM_CODE_START(trampoline_32bit_src) pushl $__KERNEL_CS pushl %eax - /* Enable paging again */ - movl $(X86_CR0_PG | X86_CR0_PE), %eax + /* Enable paging again. */ + movl %cr0, %eax + btsl $X86_CR0_PG_BIT, %eax movl %eax, %cr0 lret diff --git a/arch/x86/realmode/rm/trampoline_64.S b/arch/x86/realmode/rm/trampoline_64.S index ae112a91592f..d380f2d1fd23 100644 --- a/arch/x86/realmode/rm/trampoline_64.S +++ b/arch/x86/realmode/rm/trampoline_64.S @@ -70,7 +70,7 @@ SYM_CODE_START(trampoline_start) movw $__KERNEL_DS, %dx # Data segment descriptor # Enable protected mode - movl $X86_CR0_PE, %eax # protected mode (PE) bit + movl $(CR0_STATE & ~X86_CR0_PG), %eax movl %eax, %cr0 # into protected mode # flush prefetch and jump to startup_32 @@ -148,8 +148,8 @@ SYM_CODE_START(startup_32) movl $MSR_EFER, %ecx wrmsr - # Enable paging and in turn activate Long Mode - movl $(X86_CR0_PG | X86_CR0_WP | X86_CR0_PE), %eax + # Enable paging and in turn activate Long Mode. + movl $CR0_STATE, %eax movl %eax, %cr0 /* @@ -169,7 +169,7 @@ SYM_CODE_START(pa_trampoline_compat) movl $rm_stack_end, %esp movw $__KERNEL_DS, %dx - movl $X86_CR0_PE, %eax + movl $(CR0_STATE & ~X86_CR0_PG), %eax movl %eax, %cr0 ljmpl $__KERNEL32_CS, $pa_startup_32 SYM_CODE_END(pa_trampoline_compat) -- 2.35.1
|