lkml.org 
[lkml]   [2022]   [Apr]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] ata: ahci: Rename CONFIG_SATA_LPM_POLICY configuration item back
Date
CONFIG_SATA_LPM_MOBILE_POLICY was renamed to CONFIG_SATA_LPM_POLICY in
commit 4dd4d3deb502 ("ata: ahci: Rename CONFIG_SATA_LPM_MOBILE_POLICY
configuration item").

This caused some pain as users would invisibly lose configuration policy
defaults when they built the new kernel. To help alleviate that, switch
back to the old name (even if it's wrong).

Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
---
v1->v2:
* New patch
drivers/ata/Kconfig | 6 ++++--
drivers/ata/ahci.c | 2 +-
drivers/ata/ahci.h | 2 +-
3 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 3ffe14057ed2..c3194b80c655 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -115,14 +115,16 @@ config SATA_AHCI

If unsure, say N.

-config SATA_LPM_POLICY
+config SATA_MOBILE_LPM_POLICY
int "Default SATA Link Power Management policy for low power chipsets"
range 0 4
default 3
depends on SATA_AHCI
help
Select the Default SATA Link Power Management (LPM) policy to use
- for chipsets / "South Bridges" designated as supporting low power.
+ for chipsets / "South Bridges" supporting low-power modes. Such
+ chipsets are typically found on most laptops but desktops and
+ servers now also widely use chipsets with low power modes support.

The value set has the following meanings:
0 => Keep firmware settings
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 84456c05e845..397dfd27c90d 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1595,7 +1595,7 @@ static int ahci_init_msi(struct pci_dev *pdev, unsigned int n_ports,
static void ahci_update_initial_lpm_policy(struct ata_port *ap,
struct ahci_host_priv *hpriv)
{
- int policy = CONFIG_SATA_LPM_POLICY;
+ int policy = CONFIG_SATA_MOBILE_LPM_POLICY;


/* Ignore processing for chipsets that don't use policy */
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 6ead58c1b6e5..ad11a4c52fbe 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -236,7 +236,7 @@ enum {
AHCI_HFLAG_NO_WRITE_TO_RO = (1 << 24), /* don't write to read
only registers */
AHCI_HFLAG_USE_LPM_POLICY = (1 << 25), /* chipset that should use
- SATA_LPM_POLICY
+ SATA_MOBILE_LPM_POLICY
as default lpm_policy */
AHCI_HFLAG_SUSPEND_PHYS = (1 << 26), /* handle PHYs during
suspend/resume */
--
2.34.1
\
 
 \ /
  Last update: 2022-04-05 00:39    [W:0.155 / U:0.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site