lkml.org 
[lkml]   [2022]   [Apr]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v2 2/2] Drivers: hv: balloon: Disable balloon and hot-add accordingly
Date
From: Boqun Feng <boqun.feng@gmail.com> Sent: Thursday, March 24, 2022 7:32 PM
>
> Currently there are known potential issues for balloon and hot-add on
> ARM64:
>
> * Unballoon requests from Hyper-V should only unballoon ranges
> that are guest page size aligned, otherwise guests cannot handle
> because it's impossible to partially free a page. This is a
> problem when guest page size > 4096 bytes.
>
> * Memory hot-add requests from Hyper-V should provide the NUMA
> node id of the added ranges or ARM64 should have a functional
> memory_add_physaddr_to_nid(), otherwise the node id is missing
> for add_memory().
>
> These issues require discussions on design and implementation. In the
> meanwhile, post_status() is working and essential to guest monitoring.
> Therefore instead of disabling the entire hv_balloon driver, the
> ballooning (when page size > 4096 bytes) and hot-add are disabled
> accordingly for now. Once the issues are fixed, they can be re-enable in
> these cases.
>
> Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
> ---
> drivers/hv/hv_balloon.c | 36 ++++++++++++++++++++++++++++++++++--
> 1 file changed, 34 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/hv/hv_balloon.c b/drivers/hv/hv_balloon.c
> index 062156b88a87..eee7402cfc02 100644
> --- a/drivers/hv/hv_balloon.c
> +++ b/drivers/hv/hv_balloon.c
> @@ -1660,6 +1660,38 @@ static void disable_page_reporting(void)
> }
> }
>
> +static int ballooning_enabled(void)
> +{
> + /*
> + * Disable ballooning if the page size is not 4k (HV_HYP_PAGE_SIZE),
> + * since currently it's unclear to us whether an unballoon request can
> + * make sure all page ranges are guest page size aligned.
> + */
> + if (PAGE_SIZE != HV_HYP_PAGE_SIZE) {
> + pr_info("Ballooning disabled because page size is not 4096 bytes\n");
> + return 0;
> + }
> +
> + return 1;
> +}
> +
> +static int hot_add_enabled(void)
> +{
> + /*
> + * Disable hot add on ARM64, because we currently rely on
> + * memory_add_physaddr_to_nid() to get a node id of a hot add range,
> + * however ARM64's memory_add_physaddr_to_nid() always return 0 and
> + * DM_MEM_HOT_ADD_REQUEST doesn't have the NUMA node information for
> + * add_memory().
> + */
> + if (IS_ENABLED(CONFIG_ARM64)) {
> + pr_info("Memory hot add disabled on ARM64\n");
> + return 0;
> + }
> +
> + return 1;
> +}
> +
> static int balloon_connect_vsp(struct hv_device *dev)
> {
> struct dm_version_request version_req;
> @@ -1731,8 +1763,8 @@ static int balloon_connect_vsp(struct hv_device *dev)
> * currently still requires the bits to be set, so we have to add code
> * to fail the host's hot-add and balloon up/down requests, if any.
> */
> - cap_msg.caps.cap_bits.balloon = 1;
> - cap_msg.caps.cap_bits.hot_add = 1;
> + cap_msg.caps.cap_bits.balloon = ballooning_enabled();
> + cap_msg.caps.cap_bits.hot_add = hot_add_enabled();
>
> /*
> * Specify our alignment requirements as it relates
> --
> 2.35.1

Reviewed-by: Michael Kelley <mikelley@microsoft.com>

\
 
 \ /
  Last update: 2022-04-05 00:30    [W:0.782 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site