lkml.org 
[lkml]   [2022]   [Apr]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] bus: mhi: host: pci_generic: Add missing poweroff() PM callback
On Mon, 4 Apr 2022 at 08:41, Manivannan Sadhasivam
<manivannan.sadhasivam@linaro.org> wrote:
>
> During hibernation process, once thaw() stage completes, the MHI endpoint
> devices will be in M0 state post recovery. After that, the devices will be
> powered down so that the system can enter the target sleep state. During
> this stage, the PCI core will put the devices in D3hot. But this transition
> is allowed by the MHI spec. The devices can only enter D3hot when it is in
> M3 state.
>
> So for fixing this issue, let's add the poweroff() callback that will get
> executed before putting the system in target sleep state during
> hibernation. This callback will put the device in M3 state and that would
> allow it to receive the D3hot afterwards.
>
> Cc: stable@vger.kernel.org
> Fixes: 5f0c2ee1fe8d ("bus: mhi: pci-generic: Fix hibernation")
> Reported-by: Hemant Kumar <quic_hemantk@quicinc.com>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Reviewed-by: Loic Poulain <loic.poulain@linaro.org>


> ---
> drivers/bus/mhi/host/pci_generic.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c
> index 9527b7d63840..b1c0a8887496 100644
> --- a/drivers/bus/mhi/host/pci_generic.c
> +++ b/drivers/bus/mhi/host/pci_generic.c
> @@ -1085,6 +1085,7 @@ static const struct dev_pm_ops mhi_pci_pm_ops = {
> .resume = mhi_pci_resume,
> .freeze = mhi_pci_freeze,
> .thaw = mhi_pci_restore,
> + .poweroff = mhi_pci_suspend,
> .restore = mhi_pci_restore,
> #endif
> };
> --
> 2.25.1
>

\
 
 \ /
  Last update: 2022-04-04 09:06    [W:0.043 / U:0.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site