lkml.org 
[lkml]   [2022]   [Apr]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH RESEND v2 7/7] soc: fsl: guts: add serial_number support
Date
Most layerscapes provide a security fuse processor where the vendor
will store a unique id per part. Unfortunately, we cannot use the
corresponding efuse driver because this driver needs to be ready
early during the boot phase. To get the unique identifier, we just
need to access two registers. Thus we just search the device tree
for the corresponding device, map its memory to read the id and then
unmap it again.

Because it is likely that the offset within the fuses is dependent
on the SoC, we need a per SoC data. Also, the compatible string is
different among the SoCs. For now, this add support for the LS1028A
SoC.

Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/soc/fsl/guts.c | 48 ++++++++++++++++++++++++++++++++++++++++--
1 file changed, 46 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/fsl/guts.c b/drivers/soc/fsl/guts.c
index 370be923aa0f..27035de062f8 100644
--- a/drivers/soc/fsl/guts.c
+++ b/drivers/soc/fsl/guts.c
@@ -20,6 +20,11 @@ struct fsl_soc_die_attr {
u32 mask;
};

+struct fsl_soc_data {
+ const char *sfp_compat;
+ u32 uid_offset;
+};
+
/* SoC die attribute definition for QorIQ platform */
static const struct fsl_soc_die_attr fsl_soc_die[] = {
/*
@@ -110,6 +115,33 @@ static const struct fsl_soc_die_attr *fsl_soc_die_match(
return NULL;
}

+static u64 fsl_guts_get_soc_uid(const char *compat, unsigned int offset)
+{
+ struct device_node *np;
+ void __iomem *sfp_base;
+ u64 uid;
+
+ np = of_find_compatible_node(NULL, NULL, compat);
+ if (!np)
+ return 0;
+
+ sfp_base = of_iomap(np, 0);
+
+ uid = ioread32(sfp_base + offset);
+ uid <<= 32;
+ uid |= ioread32(sfp_base + offset + 4);
+
+ iounmap(sfp_base);
+ of_node_put(np);
+
+ return uid;
+}
+
+static const struct fsl_soc_data ls1028a_data = {
+ .sfp_compat = "fsl,ls1028a-sfp",
+ .uid_offset = 0x21c,
+};
+
/*
* Table for matching compatible strings, for device tree
* guts node, for Freescale QorIQ SOCs.
@@ -138,7 +170,7 @@ static const struct of_device_id fsl_guts_of_match[] = {
{ .compatible = "fsl,ls1012a-dcfg", },
{ .compatible = "fsl,ls1046a-dcfg", },
{ .compatible = "fsl,lx2160a-dcfg", },
- { .compatible = "fsl,ls1028a-dcfg", },
+ { .compatible = "fsl,ls1028a-dcfg", .data = &ls1028a_data},
{}
};

@@ -147,16 +179,20 @@ static int __init fsl_guts_init(void)
struct soc_device_attribute *soc_dev_attr;
static struct soc_device *soc_dev;
const struct fsl_soc_die_attr *soc_die;
+ const struct fsl_soc_data *soc_data;
+ const struct of_device_id *match;
struct ccsr_guts __iomem *regs;
const char *machine = NULL;
struct device_node *np;
bool little_endian;
+ u64 soc_uid = 0;
u32 svr;
int ret;

- np = of_find_matching_node_and_match(NULL, fsl_guts_of_match, NULL);
+ np = of_find_matching_node_and_match(NULL, fsl_guts_of_match, &match);
if (!np)
return 0;
+ soc_data = match->data;

regs = of_iomap(np, 0);
if (IS_ERR(regs)) {
@@ -204,6 +240,13 @@ static int __init fsl_guts_init(void)
if (!soc_dev_attr->revision)
goto err_nomem;

+ if (soc_data)
+ soc_uid = fsl_guts_get_soc_uid(soc_data->sfp_compat,
+ soc_data->uid_offset);
+ if (soc_uid)
+ soc_dev_attr->serial_number = kasprintf(GFP_KERNEL, "%016llX",
+ soc_uid);
+
soc_dev = soc_device_register(soc_dev_attr);
if (IS_ERR(soc_dev)) {
ret = PTR_ERR(soc_dev);
@@ -224,6 +267,7 @@ static int __init fsl_guts_init(void)
kfree(soc_dev_attr->family);
kfree(soc_dev_attr->soc_id);
kfree(soc_dev_attr->revision);
+ kfree(soc_dev_attr->serial_number);
kfree(soc_dev_attr);

return ret;
--
2.30.2
\
 
 \ /
  Last update: 2022-04-04 11:59    [W:0.133 / U:21.524 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site