lkml.org 
[lkml]   [2022]   [Apr]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 1/3] dt-bindings: display: msm: Add binding for MSM8996 DPU
From
On 30/04/2022 22:33, Dmitry Baryshkov wrote:
> On 30/04/2022 19:15, Konrad Dybcio wrote:
>> Add yaml binding for MSM8996 DPU.
>>
>> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
>> ---
>>   .../bindings/display/msm/dpu-msm8996.yaml     | 221 ++++++++++++++++++
>>   1 file changed, 221 insertions(+)
>>   create mode 100644
>> Documentation/devicetree/bindings/display/msm/dpu-msm8996.yaml
>>
>> diff --git
>> a/Documentation/devicetree/bindings/display/msm/dpu-msm8996.yaml
>> b/Documentation/devicetree/bindings/display/msm/dpu-msm8996.yaml
>> new file mode 100644
>> index 000000000000..10b02423224d
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/display/msm/dpu-msm8996.yaml
>> @@ -0,0 +1,221 @@
>> +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/display/msm/dpu-msm8996.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Qualcomm Display DPU dt properties for MSM8996 target
>> +
>> +maintainers:
>> +  - Konrad Dybcio <konrad.dybcio@somainline.org>
>> +
>> +description: |
>> +  Device tree bindings for MSM Mobile Display Subsystem (MDSS) that
>> +  encapsulates sub-blocks like DPU display controller, DSI
>> interfaces, etc.
>> +  Device tree bindings of MDSS and DPU are mentioned for MSM8996 target.
>> +
>> +properties:
>> +  compatible:
>> +    items:
>> +      - const: qcom,msm8996-mdss
>
> With the unified MDSS driver there is no need to describe a separate
> mdss bindings. Let's skip this part for now.
>
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  reg-names:
>> +    const: mdss
>> +
>> +  power-domains:
>> +    maxItems: 1
>> +
>> +  clocks:
>> +    items:
>> +      - description: Display AHB clock
>> +      - description: Display core clock
>> +
>> +  clock-names:
>> +    items:
>> +      - const: iface
>> +      - const: core
>> +
>> +  interrupts:
>> +    maxItems: 1
>> +
>> +  interrupt-controller: true
>> +
>> +  "#address-cells": true
>> +
>> +  "#size-cells": true
>> +
>> +  "#interrupt-cells":
>> +    const: 1
>> +
>> +  iommus:
>> +    items:
>> +      - description: Phandle to mdp_smmu node with SID mask for
>> Hard-Fail port0
>> +
>> +  ranges: true
>> +
>> +patternProperties:
>> +  "^display-controller@[0-9a-f]+$":
>> +    type: object
>> +    description: Node containing the properties of DPU.
>> +
>> +    properties:
>> +      compatible:
>> +        items:
>> +          - const: qcom,msm8996-dpu
>
> Okay. So, this is the most interesting part. Unlike MSM8998, which is
> supported in the mdp5 driver, but was not used in the upstream DTS
> files, for the MSM8996 the MDP5 part is described, used and widely
> tested. And, unfortunately, the bindings use solely the generic
> "qcom,mdp5" compat.
>
> I would suggest the following plan:
> - Define a binding using both "qcom,msm8996-dpu" and "qcom,mdp5"
> strings. Make sure that it is fully backwards-compatible with older dts.
>
> - Update msm8996.dtsi to follow new binding.
>
> - Let's have a Kconfig flip switch selecting which driver to be used for
> 8996/8998.

Rob suggested a modparam here.


--
With best wishes
Dmitry

\
 
 \ /
  Last update: 2022-04-30 22:56    [W:0.054 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site