lkml.org 
[lkml]   [2022]   [Apr]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v10 3/3] drivers: ddcci: add drivers for DDCCI
Date
This patch adds Documentation for the DDCCI drivers.

Signed-off-by: Yusuf Khan <yusisamerican@gmail.com>
Signed-off-by: Christoph Grenz <christophg+lkml@grenz-bonn.de>
---
Documentation/ABI/testing/sysfs-driver-ddcci | 57 +++++++++
Documentation/driver-api/ddcci.rst | 122 +++++++++++++++++++
2 files changed, 179 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-driver-ddcci
create mode 100644 Documentation/driver-api/ddcci.rst

diff --git a/Documentation/ABI/testing/sysfs-driver-ddcci b/Documentation/ABI/testing/sysfs-driver-ddcci
new file mode 100644
index 000000000000..19f77ccf3ed0
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-ddcci
@@ -0,0 +1,57 @@
+What: /sys/bus/ddcci/ddcci<I²C bus number>i<hex address>
+Date: March 2022
+KernelVersion: 5.18
+Contact: Christoph Grenz <christophg+lkml@grenz-bonn.de>
+Description: This file is a user interface for an internal
+ dependent device on the I2C bus, it exports the same
+ information as the master device(/sys/bus/ddcci/
+ ddcci<I²C bus number>) that is referenced in this
+ document.
+
+What: /sys/bus/ddcci/ddcci<I²C bus number>e<hex address>
+Date: March 2022
+KernelVersion: 5.18
+Contact: Christoph Grenz <christophg+lkml@grenz-bonn.de>
+Description: This file is a user interface for an external
+ dependent device on the I2C bus, it exports the same
+ information as the master device(/sys/bus/ddcci/
+ ddcci<I²C bus number>) that is referenced in this
+ document.
+
+What: /sys/bus/ddcci/ddcci<I²C bus number>
+Date: March 2022
+KernelVersion: 5.18
+Contact: Christoph Grenz <christophg+lkml@grenz-bonn.de>
+Description: This file provides the user interface for the
+ master device on the I2C bus. It exports the following
+ peices of information:
+ - idProt
+ ACCESS.bus protocol supported by the device. Usually
+ "monitor".
+
+ - idType
+ ACCESS.bus device subtype. Usually "LCD" or "CRT".
+
+ - idModel
+ ACCESS.bus device model identifier. Usually a
+ shortened form of the device model name.
+
+ - idVendor
+ ACCESS.bus device vendor identifier. Empty if the
+ Identification command is not supported.
+
+ - idModule
+ ACCESS.bus device module identifier. Empty if the
+ Identification command is not supported.
+
+ - idSerial
+ 32 bit device number. A fixed serial number if it's
+ positive, a temporary serial number if negative and zero
+ if the Identification command is not supported.
+
+ - modalias
+ A combined identifier for driver selection. It has the form:
+ ddcci:<idProt>-<idType>-<idModel>-<idVendor>-<idModule>.
+ All non-alphanumeric characters (including whitespace)
+ in the model, vendor or module parts are replaced by
+ underscores to prevent issues with software like systemd-udevd.
diff --git a/Documentation/driver-api/ddcci.rst b/Documentation/driver-api/ddcci.rst
new file mode 100644
index 000000000000..2b7de1ac2656
--- /dev/null
+++ b/Documentation/driver-api/ddcci.rst
@@ -0,0 +1,122 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+==============
+DDC/CI
+==============
+
+1. Introduction
+===============
+DDC/CI is a control protocol for monitor settings supported by most
+monitors since about 2005. It is based on ACCESS.bus (an early USB predecessor).
+This could be used to create drivers that communicate with the DDCCI component,
+see ddcci-backlight for an example.
+
+2. sysfs interface
+==================
+Each detected DDC/CI device gets a directory in /sys/bus/ddcci/devices.
+The main device on a bus is named ddcci[I²C bus number].
+Internal dependent devices are named ddcci[I²C bus number]i[hex address]
+External dependent devices are named ddcci[I²C bus number]e[hex address]
+There the following files export information about the device:
+
+capabilities
+The full ACCESS.bus capabilities string. It contains the protocol,
+type and model of the device, a list of all supported command
+codes, etc. See the ACCESS.bus spec for more information.
+
+- idProt
+ACCESS.bus protocol supported by the device. Usually "monitor".
+
+- idType
+ACCESS.bus device subtype. Usually "LCD" or "CRT".
+
+- idModel
+ACCESS.bus device model identifier. Usually a shortened form of the
+device model name.
+
+- idVendor
+ACCESS.bus device vendor identifier. Empty if the Identification command
+is not supported.
+
+- idModule
+ACCESS.bus device module identifier. Empty if the Identification command
+is not supported.
+
+- idSerial
+32 bit device number. A fixed serial number if it's positive, a temporary
+serial number if negative and zero if the
+Identification command is not supported.
+
+- modalias
+A combined identifier for driver selection. It has the form:
+ddcci:<idProt>-<idType>-<idModel>-<idVendor>-<idModule>.
+All non-alphanumeric characters (including whitespace) in the model,
+vendor or module parts are replaced by underscores to prevent issues
+with software like systemd-udevd.
+
+3. Character device interface
+=============================
+For each DDC/CI device a character device in
+/dev/bus/ddcci/[I²C bus number]/ is created,
+127 devices are assigned in total.
+
+The main device on the bus is named display.
+
+Internal dependent devices are named i[hex address]
+
+External dependent devices are named e[hex address]
+
+These character devices can be used to issue commands to a DDC/CI device
+more easily than over i2c-dev devices. They should be opened unbuffered.
+To send a command just write the command byte and the arguments with a
+single write() operation. The length byte and checksum are automatically
+calculated.
+
+To read a response use read() with a buffer big enough for the expected answer.
+
+NOTE: The maximum length of a DDC/CI message is 32 bytes.
+
+4. ddcci-backlight (monitor backlight driver)
+=============================================
+[This is not specific to the DDC/CI backlight driver, if you already dealt with
+backlight drivers, skip over this.]
+
+For each monitor that supports accessing the Backlight Level White
+or the Luminance property, a backlight device of type "raw" named like the
+corresponding ddcci device is created. You can find them in /sys/class/backlight/.
+For convenience a symlink "ddcci_backlight" on the device associated with the
+display connector in /sys/class/drm/ to the backlight device is created, as
+long as the graphics driver allows to make this association.
+
+5. Limitations
+==============
+
+-Dependent devices (sub devices using DDC/CI directly wired to the monitor,
+like Calibration devices, IR remotes, etc.) aren't automatically detected.
+You can force detection of external dependent devices by writing
+"ddcci-dependent [address]" into /sys/bus/i2c/i2c-?/new_device.
+
+There is no direct synchronization if you manually change the luminance
+with the buttons on your monitor, as this can only be realized through polling
+and some monitors close their OSD every time a DDC/CI command is received.
+
+Monitor hotplugging is not detected. You need to detach/reattach the I²C driver
+or reload the module.
+
+6. Debugging
+============
+Both drivers use the dynamic debugging feature of the Linux kernel.
+To get detailed debugging messages, set the dyndbg module parameter.
+If you want to enable debugging permanently across reboots, create a file
+/etc/modprobe.d/ddcci.conf containing lines like the following before loading the modules:
+
+options ddcci dyndbg
+options ddcci-backlight dyndbg
+
+7. Origin
+============
+This driver originally came from Christoph Grenz in DKMS form here:
+https://gitlab.com/ddcci-driver-linux/ddcci-driver-linux
+with multiple backups available on the wayback machine. It also
+inlcudes a example program for the usage of this driver in
+userland.
--
2.25.1
\
 
 \ /
  Last update: 2022-04-04 01:10    [W:0.097 / U:1.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site