lkml.org 
[lkml]   [2022]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 4/7] dt-bindings: clock: Add Nuvoton WPCM450 clock/reset controller
On Mon, 25 Apr 2022 at 07:59, Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> On 22/04/2022 20:30, Jonathan Neuschäfer wrote:
> > The Nuvoton WPCM450 SoC has a combined clock and reset controller.
> > Add a devicetree binding for it, as well as definitions for the bit
> > numbers used by it.
> >
> > Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
> > ---
>
> Thank you for your patch. There is something to discuss/improve.
>
> > .../bindings/clock/nuvoton,wpcm450-clk.yaml | 74 +++++++++++++++++++
> > .../dt-bindings/clock/nuvoton,wpcm450-clk.h | 67 +++++++++++++++++
> > 2 files changed, 141 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/clock/nuvoton,wpcm450-clk.yaml
> > create mode 100644 include/dt-bindings/clock/nuvoton,wpcm450-clk.h
> >
> > diff --git a/Documentation/devicetree/bindings/clock/nuvoton,wpcm450-clk.yaml b/Documentation/devicetree/bindings/clock/nuvoton,wpcm450-clk.yaml
> > new file mode 100644
> > index 0000000000000..0fffa8a68dee4
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/clock/nuvoton,wpcm450-clk.yaml
> > @@ -0,0 +1,74 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/clock/nuvoton,wpcm450-clk.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Nuvoton WPCM450 clock controller binding
>
> s/binding//
>
> > +
> > +maintainers:
> > + - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
> > +
> > +description:
> > + This binding describes the clock controller of the Nuvoton WPCM450 SoC, which
> > + supplies clocks and resets to the rest of the chip.
>
> s/This binding describes//
>
> Just describe the hardware.
>
> > +
> > +properties:
> > + compatible:
> > + const: nuvoton,wpcm450-clk
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + clocks:
> > + items:
> > + - description: Reference clock oscillator (should be 48 MHz)
> > +
> > + clock-names:
> > + items:
> > + - const: refclk
> > +
> > + '#clock-cells':
> > + const: 1
> > +
> > + '#reset-cells':
> > + const: 1
> > +
> > +additionalProperties: false
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - clocks
> > + - clock-names
> > + - '#clock-cells'
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/clock/nuvoton,wpcm450-clk.h>
> > + #include <dt-bindings/interrupt-controller/irq.h>
> > +
> > + refclk: clock-48mhz {
> > + /* 48 MHz reference oscillator */
> > + compatible = "fixed-clock";
> > + clock-output-names = "refclk";
> > + clock-frequency = <48000000>;
> > + #clock-cells = <0>;
> > + };
> > +
> > + clk: clock-controller@b0000200 {
> > + reg = <0xb0000200 0x100>;
> > + compatible = "nuvoton,wpcm450-clk";
> > + clocks = <&refclk>;
> > + clock-names = "refclk";
> > + #clock-cells = <1>;
> > + #reset-cells = <1>;
> > + };
> > +
> > + serial@b8000000 {
> > + compatible = "nuvoton,wpcm450-uart";
> > + reg = <0xb8000000 0x20>;
> > + reg-shift = <2>;
> > + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&clk WPCM450_CLK_UART0>;
> > + };
>
> Skip the consumer example, it's obvious/trivial/duplicating.
>
> > diff --git a/include/dt-bindings/clock/nuvoton,wpcm450-clk.h b/include/dt-bindings/clock/nuvoton,wpcm450-clk.h
> > new file mode 100644
> > index 0000000000000..86e1c895921b7
> > --- /dev/null
> > +++ b/include/dt-bindings/clock/nuvoton,wpcm450-clk.h
> > @@ -0,0 +1,67 @@
> > +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
> > +
> > +#ifndef _DT_BINDINGS_CLOCK_NUVOTON_WPCM450_CLK_H
> > +#define _DT_BINDINGS_CLOCK_NUVOTON_WPCM450_CLK_H
> > +
> > +/* Clocks based on CLKEN bits */
> > +#define WPCM450_CLK_FIU 0
> > +#define WPCM450_CLK_XBUS 1
> > +#define WPCM450_CLK_KCS 2
> > +#define WPCM450_CLK_SHM 4
> > +#define WPCM450_CLK_USB1 5
> > +#define WPCM450_CLK_EMC0 6
> > +#define WPCM450_CLK_EMC1 7
> > +#define WPCM450_CLK_USB0 8
> > +#define WPCM450_CLK_PECI 9
> > +#define WPCM450_CLK_AES 10
> > +#define WPCM450_CLK_UART0 11
> > +#define WPCM450_CLK_UART1 12
> > +#define WPCM450_CLK_SMB2 13
> > +#define WPCM450_CLK_SMB3 14
> > +#define WPCM450_CLK_SMB4 15
> > +#define WPCM450_CLK_SMB5 16
> > +#define WPCM450_CLK_HUART 17
> > +#define WPCM450_CLK_PWM 18
> > +#define WPCM450_CLK_TIMER0 19
> > +#define WPCM450_CLK_TIMER1 20
> > +#define WPCM450_CLK_TIMER2 21
> > +#define WPCM450_CLK_TIMER3 22
> > +#define WPCM450_CLK_TIMER4 23
> > +#define WPCM450_CLK_MFT0 24
> > +#define WPCM450_CLK_MFT1 25
> > +#define WPCM450_CLK_WDT 26
> > +#define WPCM450_CLK_ADC 27
> > +#define WPCM450_CLK_SDIO 28
> > +#define WPCM450_CLK_SSPI 29
> > +#define WPCM450_CLK_SMB0 30
> > +#define WPCM450_CLK_SMB1 31
> > +
> > +/* Other clocks */
> > +#define WPCM450_CLK_USBPHY 32
> > +
> > +#define WPCM450_NUM_CLKS 33
> > +
> > +/* Resets based on IPSRST bits */
>
> All these defines should be in second header in dt-bindings/reset/...

I disagree. It makes more sense to keep the definitions together, and
it's all for the same hardware and driver.

>
> > +#define WPCM450_RESET_FIU 0
>
>
> Best regards,
> Krzysztof

\
 
 \ /
  Last update: 2022-04-26 11:04    [W:0.246 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site