lkml.org 
[lkml]   [2022]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v22 2/2] arm64: dts: qcom: sc7280-herobrine: Add nodes for onboard USB hub
Date
Add nodes for the onboard USB hub on herobrine devices. Remove the
'always-on' property from the hub regulator, since the regulator
is now managed by the onboard_usb_hub driver.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
---

Changes in v22:
- patch added to the series

.../arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 21 ++++++++++++++++++-
1 file changed, 20 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
index d58045dd7334..46937d21b229 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -143,8 +143,8 @@ pp3300_hub: pp3300-hub-regulator {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;

+ /* The BIOS leaves this regulator on */
regulator-boot-on;
- regulator-always-on;

gpio = <&tlmm 157 GPIO_ACTIVE_HIGH>;
enable-active-high;
@@ -560,6 +560,25 @@ &usb_1 {

&usb_1_dwc3 {
dr_mode = "host";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 2.x hub on port 1 */
+ usb_hub_2_x: hub@1 {
+ compatible = "usbbda,5411";
+ reg = <1>;
+ vdd-supply = <&pp3300_hub>;
+ companion-hub = <&usb_hub_3_x>;
+ };
+
+ /* 3.x hub on port 2 */
+ usb_hub_3_x: hub@2 {
+ compatible = "usbbda,411";
+ reg = <2>;
+ vdd-supply = <&pp3300_hub>;
+ companion-hub = <&usb_hub_2_x>;
+ };
};

&usb_1_hsphy {
--
2.36.0.rc2.479.g8af0fa9b8e-goog
\
 
 \ /
  Last update: 2022-04-27 02:05    [W:0.084 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site