lkml.org 
[lkml]   [2022]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v3 01/21] x86/virt/tdx: Detect SEAM
From
On 4/26/22 16:12, Kai Huang wrote:
> Hi Dave,
>
> Thanks for review!
>
> On Tue, 2022-04-26 at 13:21 -0700, Dave Hansen wrote:
>>> +config INTEL_TDX_HOST
>>> + bool "Intel Trust Domain Extensions (TDX) host support"
>>> + default n
>>> + depends on CPU_SUP_INTEL
>>> + depends on X86_64
>>> + help
>>> + Intel Trust Domain Extensions (TDX) protects guest VMs from
>>> malicious
>>> + host and certain physical attacks. This option enables necessary
>>> TDX
>>> + support in host kernel to run protected VMs.
>>> +
>>> + If unsure, say N.
>>
>> Nothing about KVM?
>
> I'll add KVM into the context. How about below?
>
> "Intel Trust Domain Extensions (TDX) protects guest VMs from malicious
> host and certain physical attacks. This option enables necessary TDX
> support in host kernel to allow KVM to run protected VMs called Trust
> Domains (TD)."

What about a dependency? Isn't this dead code without CONFIG_KVM=y/m?

>>> diff --git a/arch/x86/virt/vmx/tdx/tdx.c b/arch/x86/virt/vmx/tdx/tdx.c
>>> new file mode 100644
>>> index 000000000000..03f35c75f439
>>> --- /dev/null
>>> +++ b/arch/x86/virt/vmx/tdx/tdx.c
>>> @@ -0,0 +1,102 @@
>>> +// SPDX-License-Identifier: GPL-2.0
>>> +/*
>>> + * Copyright(c) 2022 Intel Corporation.
>>> + *
>>> + * Intel Trusted Domain Extensions (TDX) support
>>> + */
>>> +
>>> +#define pr_fmt(fmt) "tdx: " fmt
>>> +
>>> +#include <linux/types.h>
>>> +#include <linux/cpumask.h>
>>> +#include <asm/msr-index.h>
>>> +#include <asm/msr.h>
>>> +#include <asm/cpufeature.h>
>>> +#include <asm/cpufeatures.h>
>>> +#include <asm/tdx.h>
>>> +
>>> +/* Support Intel Secure Arbitration Mode Range Registers (SEAMRR) */
>>> +#define MTRR_CAP_SEAMRR BIT(15)
>>> +
>>> +/* Core-scope Intel SEAMRR base and mask registers. */
>>> +#define MSR_IA32_SEAMRR_PHYS_BASE 0x00001400
>>> +#define MSR_IA32_SEAMRR_PHYS_MASK 0x00001401
>>> +
>>> +#define SEAMRR_PHYS_BASE_CONFIGURED BIT_ULL(3)
>>> +#define SEAMRR_PHYS_MASK_ENABLED BIT_ULL(11)
>>> +#define SEAMRR_PHYS_MASK_LOCKED BIT_ULL(10)
>>> +
>>> +#define SEAMRR_ENABLED_BITS \
>>> + (SEAMRR_PHYS_MASK_ENABLED | SEAMRR_PHYS_MASK_LOCKED)
>>> +
>>> +/* BIOS must configure SEAMRR registers for all cores consistently */
>>> +static u64 seamrr_base, seamrr_mask;
>>> +
>>> +static bool __seamrr_enabled(void)
>>> +{
>>> + return (seamrr_mask & SEAMRR_ENABLED_BITS) == SEAMRR_ENABLED_BITS;
>>> +}
>>
>> But there's no case where seamrr_mask is non-zero and where
>> _seamrr_enabled(). Why bother checking the SEAMRR_ENABLED_BITS?
>
> seamrr_mask will only be non-zero when SEAMRR is enabled by BIOS, otherwise it
> is 0. It will also be cleared when BIOS mis-configuration is detected on any
> AP. SEAMRR_ENABLED_BITS is used to check whether SEAMRR is enabled.

The point is that this could be:

return !!seamrr_mask;


>>> +static void detect_seam_ap(struct cpuinfo_x86 *c)
>>> +{
>>> + u64 base, mask;
>>> +
>>> + /*
>>> + * Don't bother to detect this AP if SEAMRR is not
>>> + * enabled after earlier detections.
>>> + */
>>> + if (!__seamrr_enabled())
>>> + return;
>>> +
>>> + rdmsrl(MSR_IA32_SEAMRR_PHYS_BASE, base);
>>> + rdmsrl(MSR_IA32_SEAMRR_PHYS_MASK, mask);
>>> +
>>
>> This is the place for a comment about why the values have to be equal.
>
> I'll add below:
>
> /* BIOS must configure SEAMRR consistently across all cores */

What happens if the BIOS doesn't do this? What actually breaks? In
other words, do we *NEED* error checking here?

>>> + if (base == seamrr_base && mask == seamrr_mask)
>>> + return;
>>> +
>>> + pr_err("Inconsistent SEAMRR configuration by BIOS\n");
>>> + /* Mark SEAMRR as disabled. */
>>> + seamrr_base = 0;
>>> + seamrr_mask = 0;
>>> +}
>>> +
>>> +static void detect_seam(struct cpuinfo_x86 *c)
>>> +{
>>> + if (c == &boot_cpu_data)
>>> + detect_seam_bsp(c);
>>> + else
>>> + detect_seam_ap(c);
>>> +}
>>> +
>>> +void tdx_detect_cpu(struct cpuinfo_x86 *c)
>>> +{
>>> + detect_seam(c);
>>> +}
>>
>> The extra function looks a bit silly here now. Maybe this gets filled
>> out later, but it's goofy-looking here.
>
> Thomas suggested to put all TDX detection related in one function call, so I
> added tdx_detect_cpu(). I'll move this to the next patch when detecting TDX
> KeyIDs.

That's fine, or just add a comment or a changelog sentence about this
being filled out later.

\
 
 \ /
  Last update: 2022-04-27 01:25    [W:0.923 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site