lkml.org 
[lkml]   [2022]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 2/2] drm/msm/dp: do not stop transmitting phy test pattern during DP phy compliance test
Quoting Kuogee Hsieh (2022-04-25 17:16:53)
> At normal operation, transmit phy test pattern has to be terminated before
> DP controller switch to video ready state. However during phy compliance
> testing, transmit phy test pattern should not be terminated until end of
> compliance test which usually indicated by unplugged interrupt.
>
> Only stop sending the train pattern in dp_ctrl_on_stream() if we're not
> doing compliance testing. We also no longer reset 'p_level' and
> 'v_level' within dp_ctrl_on_link() due to both 'p_level' and 'v_level'
> are acquired from link status at previous dpcd read and we like to use
> those level to start link training.
>
> Changes in v2:
> -- add more details commit text
> -- correct Fixes
>
> Fixes: 2e0adc765d88 ("drm/msm/dp: do not end dp link training until video is ready")
> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

One comment.

> diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
> index 193cc1a..f99e173 100644
> --- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
> +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
> @@ -1839,6 +1831,13 @@ int dp_ctrl_on_stream(struct dp_ctrl *dp_ctrl)
> return 0;
> }
>
> + if (!dp_ctrl_channel_eq_ok(ctrl)) {
> + dp_ctrl_link_retrain(ctrl);
> + }

Drop unnecessary braces.

\
 
 \ /
  Last update: 2022-04-26 18:52    [W:0.045 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site