lkml.org 
[lkml]   [2022]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH -next 6/6] nbd: use pr_err to output error message
Date
Instead of using the long printk(KERN_ERR "nbd: ...") to
output error message, defining pr_fmt and using
the short pr_err("") to do that. The replacemen is done
by using the following command:

sed -i 's/printk(KERN_ERR "nbd: /pr_err("/g' \
drivers/block/nbd.c

Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
---
drivers/block/nbd.c | 36 ++++++++++++++++++------------------
1 file changed, 18 insertions(+), 18 deletions(-)

diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index 566aabcaff51..8d15a9d929c7 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -1930,16 +1930,16 @@ static int nbd_genl_connect(struct sk_buff *skb, struct genl_info *info)
* MKDEV() expect that the max bits of first_minor is 20.
*/
if (index < 0 || index > MINORMASK >> part_shift) {
- printk(KERN_ERR "nbd: illegal input index %d\n", index);
+ pr_err("illegal input index %d\n", index);
return -EINVAL;
}
}
if (!info->attrs[NBD_ATTR_SOCKETS]) {
- printk(KERN_ERR "nbd: must specify at least one socket\n");
+ pr_err("must specify at least one socket\n");
return -EINVAL;
}
if (!info->attrs[NBD_ATTR_SIZE_BYTES]) {
- printk(KERN_ERR "nbd: must specify a size in bytes for the device\n");
+ pr_err("must specify a size in bytes for the device\n");
return -EINVAL;
}
again:
@@ -1975,7 +1975,7 @@ static int nbd_genl_connect(struct sk_buff *skb, struct genl_info *info)
nbd_put(nbd);
if (index == -1)
goto again;
- printk(KERN_ERR "nbd: nbd%d already in use\n", index);
+ pr_err("nbd%d already in use\n", index);
return -EBUSY;
}
if (WARN_ON(nbd->config)) {
@@ -1987,7 +1987,7 @@ static int nbd_genl_connect(struct sk_buff *skb, struct genl_info *info)
if (IS_ERR(config)) {
mutex_unlock(&nbd->config_lock);
nbd_put(nbd);
- printk(KERN_ERR "nbd: couldn't allocate config\n");
+ pr_err("couldn't allocate config\n");
return PTR_ERR(config);
}
nbd->config = config;
@@ -2043,7 +2043,7 @@ static int nbd_genl_connect(struct sk_buff *skb, struct genl_info *info)
struct nlattr *socks[NBD_SOCK_MAX+1];

if (nla_type(attr) != NBD_SOCK_ITEM) {
- printk(KERN_ERR "nbd: socks must be embedded in a SOCK_ITEM attr\n");
+ pr_err("socks must be embedded in a SOCK_ITEM attr\n");
ret = -EINVAL;
goto out;
}
@@ -2052,7 +2052,7 @@ static int nbd_genl_connect(struct sk_buff *skb, struct genl_info *info)
nbd_sock_policy,
info->extack);
if (ret != 0) {
- printk(KERN_ERR "nbd: error processing sock list\n");
+ pr_err("error processing sock list\n");
ret = -EINVAL;
goto out;
}
@@ -2123,7 +2123,7 @@ static int nbd_genl_disconnect(struct sk_buff *skb, struct genl_info *info)
return -EPERM;

if (!info->attrs[NBD_ATTR_INDEX]) {
- printk(KERN_ERR "nbd: must specify an index to disconnect\n");
+ pr_err("must specify an index to disconnect\n");
return -EINVAL;
}
index = nla_get_u32(info->attrs[NBD_ATTR_INDEX]);
@@ -2131,13 +2131,13 @@ static int nbd_genl_disconnect(struct sk_buff *skb, struct genl_info *info)
nbd = idr_find(&nbd_index_idr, index);
if (!nbd) {
mutex_unlock(&nbd_index_mutex);
- printk(KERN_ERR "nbd: couldn't find device at index %d\n",
+ pr_err("couldn't find device at index %d\n",
index);
return -EINVAL;
}
if (!refcount_inc_not_zero(&nbd->refs)) {
mutex_unlock(&nbd_index_mutex);
- printk(KERN_ERR "nbd: device at index %d is going down\n",
+ pr_err("device at index %d is going down\n",
index);
return -EINVAL;
}
@@ -2163,7 +2163,7 @@ static int nbd_genl_reconfigure(struct sk_buff *skb, struct genl_info *info)
return -EPERM;

if (!info->attrs[NBD_ATTR_INDEX]) {
- printk(KERN_ERR "nbd: must specify a device to reconfigure\n");
+ pr_err("must specify a device to reconfigure\n");
return -EINVAL;
}
index = nla_get_u32(info->attrs[NBD_ATTR_INDEX]);
@@ -2171,7 +2171,7 @@ static int nbd_genl_reconfigure(struct sk_buff *skb, struct genl_info *info)
nbd = idr_find(&nbd_index_idr, index);
if (!nbd) {
mutex_unlock(&nbd_index_mutex);
- printk(KERN_ERR "nbd: couldn't find a device at index %d\n",
+ pr_err("couldn't find a device at index %d\n",
index);
return -EINVAL;
}
@@ -2193,7 +2193,7 @@ static int nbd_genl_reconfigure(struct sk_buff *skb, struct genl_info *info)
}
if (!refcount_inc_not_zero(&nbd->refs)) {
mutex_unlock(&nbd_index_mutex);
- printk(KERN_ERR "nbd: device at index %d is going down\n",
+ pr_err("device at index %d is going down\n",
index);
return -EINVAL;
}
@@ -2258,7 +2258,7 @@ static int nbd_genl_reconfigure(struct sk_buff *skb, struct genl_info *info)
struct nlattr *socks[NBD_SOCK_MAX+1];

if (nla_type(attr) != NBD_SOCK_ITEM) {
- printk(KERN_ERR "nbd: socks must be embedded in a SOCK_ITEM attr\n");
+ pr_err("socks must be embedded in a SOCK_ITEM attr\n");
ret = -EINVAL;
goto out;
}
@@ -2267,7 +2267,7 @@ static int nbd_genl_reconfigure(struct sk_buff *skb, struct genl_info *info)
nbd_sock_policy,
info->extack);
if (ret != 0) {
- printk(KERN_ERR "nbd: error processing sock list\n");
+ pr_err("error processing sock list\n");
ret = -EINVAL;
goto out;
}
@@ -2484,7 +2484,7 @@ static int __init nbd_init(void)
BUILD_BUG_ON(sizeof(struct nbd_request) != 28);

if (max_part < 0) {
- printk(KERN_ERR "nbd: max_part must be >= 0\n");
+ pr_err("max_part must be >= 0\n");
return -EINVAL;
}

@@ -2563,10 +2563,10 @@ static void __exit nbd_cleanup(void)
nbd = list_first_entry(&del_list, struct nbd_device, list);
list_del_init(&nbd->list);
if (refcount_read(&nbd->config_refs))
- printk(KERN_ERR "nbd: possibly leaking nbd_config (ref %d)\n",
+ pr_err("possibly leaking nbd_config (ref %d)\n",
refcount_read(&nbd->config_refs));
if (refcount_read(&nbd->refs) != 1)
- printk(KERN_ERR "nbd: possibly leaking a device\n");
+ pr_err("possibly leaking a device\n");
nbd_put(nbd);
}

--
2.31.1
\
 
 \ /
  Last update: 2022-04-26 14:55    [W:0.089 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site