lkml.org 
[lkml]   [2022]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 0/7] mm: demotion: Introduce new node state N_DEMOTION_TARGETS
On Mon, 25 Apr 2022 20:23:56 +0530
Aneesh Kumar K V <aneesh.kumar@linux.ibm.com> wrote:

> On 4/25/22 7:27 PM, Jonathan Cameron wrote:
> > On Mon, 25 Apr 2022 16:45:38 +0530
> > Jagdish Gediya <jvgediya@linux.ibm.com> wrote:
> >
>
> ....
>
> >> $ numactl -H
> >> available: 2 nodes (0-1)
> >> node 0 cpus: 0 1 2 3 4 5 6 7
> >> node 0 size: 14272 MB
> >> node 0 free: 13392 MB
> >> node 1 cpus:
> >> node 1 size: 2028 MB
> >> node 1 free: 1971 MB
> >> node distances:
> >> node 0 1
> >> 0: 10 40
> >> 1: 40 10
> >>
> >> 1) without N_DEMOTION_TARGETS patch series, 1 is demotion target
> >> for 0 even when 1 is DRAM node and there is no demotion targets for 1.
> >
> > I'm not convinced the distinction between DRAM and persistent memory is
> > valid. There will definitely be systems with a large pool
> > of remote DRAM (and potentially no NV memory) where the right choice
> > is to demote to that DRAM pool.
> >
> > Basing the decision on whether the memory is from kmem or
> > normal DRAM doesn't provide sufficient information to make the decision.
> >
> >>
> >> $ cat /sys/bus/nd/devices/dax0.0/target_node
> >> 2
> >> $
> >> # cd /sys/bus/dax/drivers/
> >> :/sys/bus/dax/drivers# ls
> >> device_dax kmem
> >> :/sys/bus/dax/drivers# cd device_dax/
> >> :/sys/bus/dax/drivers/device_dax# echo dax0.0 > unbind
> >> :/sys/bus/dax/drivers/device_dax# echo dax0.0 > ../kmem/new_id
> >> :/sys/bus/dax/drivers/device_dax# numactl -H
> >> available: 3 nodes (0-2)
> >> node 0 cpus: 0 1 2 3 4 5 6 7
> >> node 0 size: 14272 MB
> >> node 0 free: 13380 MB
> >> node 1 cpus:
> >> node 1 size: 2028 MB
> >> node 1 free: 1961 MB
> >> node 2 cpus:
> >> node 2 size: 0 MB
> >> node 2 free: 0 MB
> >> node distances:
> >> node 0 1 2
> >> 0: 10 40 80
> >> 1: 40 10 80
> >> 2: 80 80 10
> >>
> >> 2) Once this new node brought online, without N_DEMOTION_TARGETS
> >> patch series, 1 is demotion target for 0 and 2 is demotion target
> >> for 1.
> >>
> >> With this patch series applied,
> >> 1) No demotion target for either 0 or 1 before dax device is online
> >
> > I'd argue that is wrong. At this state you have a tiered memory system
> > be it one with just DRAM. Using it as such is correct behavior that
> > we should not be preventing. Sure some usecases wouldn't want that
> > arrangement but some do want it.
> >
>
> I missed this in my earlier reply. Are you suggesting that we would want
> Node 1 (DRAM only memory numa node) to act as demotion target for Node
> 0? Any reason why we would want to do that? That is clearly opposite of
> what we are trying to do here. IMHO node using Node1 as demotion target
> for Node0 is a better default?

In this case, because of the small size that probably wouldn't make sense.
But, if that were a CXL memory pool with multiple TB of DDR then yes
we would want the default case to use that memory for the demotion path.

So I don't think DDR vs NV via kmem alone is the right basis for a decision
on the default behavior.

Sure we can make this all a userspace problem.

Jonathan

>
>
>
> -aneesh

\
 
 \ /
  Last update: 2022-04-26 12:45    [W:0.078 / U:0.460 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site