lkml.org 
[lkml]   [2022]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 3/4] dmaengine: sun6i: Add support for 34-bit physical addresses
Date
Recent Allwinner SoCs support >4 GiB of DRAM, so those variants of the
DMA engine support >32 bit physical addresses. This is accomplished by
placing the high bits in the "para" word in the DMA descriptor.

DMA descriptors themselves can be located at >32 bit addresses by
putting the high bits in the LSBs of the descriptor address register,
taking advantage of the required DMA descriptor alignment. However,
support for this is not really necessary, so we can avoid the
complication by allocating them from the DMA_32 zone.

Signed-off-by: Samuel Holland <samuel@sholland.org>
---

Changes in v3:
- Fix shift warnings for 32-bit dma_addr_t and 32-bit phys_addr_t
- Make explicit that v_lli->src/dst only hold the low 32 bits

Changes in v2:
- Fix `checkpatch.pl --strict` style issues (missing spaces)

drivers/dma/sun6i-dma.c | 53 +++++++++++++++++++++++++++++------------
1 file changed, 38 insertions(+), 15 deletions(-)

diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
index 4436fbd70445..1eb3bafa7324 100644
--- a/drivers/dma/sun6i-dma.c
+++ b/drivers/dma/sun6i-dma.c
@@ -90,6 +90,14 @@

#define DMA_CHAN_CUR_PARA 0x1c

+/*
+ * LLI address mangling
+ *
+ * The LLI link physical address is also mangled, but we avoid dealing
+ * with that by allocating LLIs from the DMA32 zone.
+ */
+#define SRC_HIGH_ADDR(x) (((x) & 0x3U) << 16)
+#define DST_HIGH_ADDR(x) (((x) & 0x3U) << 18)

/*
* Various hardware related defines
@@ -132,6 +140,7 @@ struct sun6i_dma_config {
u32 dst_burst_lengths;
u32 src_addr_widths;
u32 dst_addr_widths;
+ bool has_high_addr;
bool has_mbus_clk;
};

@@ -623,6 +632,18 @@ static int set_config(struct sun6i_dma_dev *sdev,
return 0;
}

+static inline void sun6i_dma_set_addr(struct sun6i_dma_dev *sdev,
+ struct sun6i_dma_lli *v_lli,
+ dma_addr_t src, dma_addr_t dst)
+{
+ v_lli->src = lower_32_bits(src);
+ v_lli->dst = lower_32_bits(dst);
+
+ if (sdev->cfg->has_high_addr)
+ v_lli->para |= SRC_HIGH_ADDR(upper_32_bits(src)) |
+ DST_HIGH_ADDR(upper_32_bits(dst));
+}
+
static struct dma_async_tx_descriptor *sun6i_dma_prep_dma_memcpy(
struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
size_t len, unsigned long flags)
@@ -645,16 +666,15 @@ static struct dma_async_tx_descriptor *sun6i_dma_prep_dma_memcpy(
if (!txd)
return NULL;

- v_lli = dma_pool_alloc(sdev->pool, GFP_NOWAIT, &p_lli);
+ v_lli = dma_pool_alloc(sdev->pool, GFP_DMA32 | GFP_NOWAIT, &p_lli);
if (!v_lli) {
dev_err(sdev->slave.dev, "Failed to alloc lli memory\n");
goto err_txd_free;
}

- v_lli->src = src;
- v_lli->dst = dest;
v_lli->len = len;
v_lli->para = NORMAL_WAIT;
+ sun6i_dma_set_addr(sdev, v_lli, src, dest);

burst = convert_burst(8);
width = convert_buswidth(DMA_SLAVE_BUSWIDTH_4_BYTES);
@@ -705,7 +725,7 @@ static struct dma_async_tx_descriptor *sun6i_dma_prep_slave_sg(
return NULL;

for_each_sg(sgl, sg, sg_len, i) {
- v_lli = dma_pool_alloc(sdev->pool, GFP_NOWAIT, &p_lli);
+ v_lli = dma_pool_alloc(sdev->pool, GFP_DMA32 | GFP_NOWAIT, &p_lli);
if (!v_lli)
goto err_lli_free;

@@ -713,8 +733,9 @@ static struct dma_async_tx_descriptor *sun6i_dma_prep_slave_sg(
v_lli->para = NORMAL_WAIT;

if (dir == DMA_MEM_TO_DEV) {
- v_lli->src = sg_dma_address(sg);
- v_lli->dst = sconfig->dst_addr;
+ sun6i_dma_set_addr(sdev, v_lli,
+ sg_dma_address(sg),
+ sconfig->dst_addr);
v_lli->cfg = lli_cfg;
sdev->cfg->set_drq(&v_lli->cfg, DRQ_SDRAM, vchan->port);
sdev->cfg->set_mode(&v_lli->cfg, LINEAR_MODE, IO_MODE);
@@ -726,8 +747,9 @@ static struct dma_async_tx_descriptor *sun6i_dma_prep_slave_sg(
sg_dma_len(sg), flags);

} else {
- v_lli->src = sconfig->src_addr;
- v_lli->dst = sg_dma_address(sg);
+ sun6i_dma_set_addr(sdev, v_lli,
+ sconfig->src_addr,
+ sg_dma_address(sg));
v_lli->cfg = lli_cfg;
sdev->cfg->set_drq(&v_lli->cfg, vchan->port, DRQ_SDRAM);
sdev->cfg->set_mode(&v_lli->cfg, IO_MODE, LINEAR_MODE);
@@ -786,7 +808,7 @@ static struct dma_async_tx_descriptor *sun6i_dma_prep_dma_cyclic(
return NULL;

for (i = 0; i < periods; i++) {
- v_lli = dma_pool_alloc(sdev->pool, GFP_NOWAIT, &p_lli);
+ v_lli = dma_pool_alloc(sdev->pool, GFP_DMA32 | GFP_NOWAIT, &p_lli);
if (!v_lli) {
dev_err(sdev->slave.dev, "Failed to alloc lli memory\n");
goto err_lli_free;
@@ -796,14 +818,16 @@ static struct dma_async_tx_descriptor *sun6i_dma_prep_dma_cyclic(
v_lli->para = NORMAL_WAIT;

if (dir == DMA_MEM_TO_DEV) {
- v_lli->src = buf_addr + period_len * i;
- v_lli->dst = sconfig->dst_addr;
+ sun6i_dma_set_addr(sdev, v_lli,
+ buf_addr + period_len * i,
+ sconfig->dst_addr);
v_lli->cfg = lli_cfg;
sdev->cfg->set_drq(&v_lli->cfg, DRQ_SDRAM, vchan->port);
sdev->cfg->set_mode(&v_lli->cfg, LINEAR_MODE, IO_MODE);
} else {
- v_lli->src = sconfig->src_addr;
- v_lli->dst = buf_addr + period_len * i;
+ sun6i_dma_set_addr(sdev, v_lli,
+ sconfig->src_addr,
+ buf_addr + period_len * i);
v_lli->cfg = lli_cfg;
sdev->cfg->set_drq(&v_lli->cfg, vchan->port, DRQ_SDRAM);
sdev->cfg->set_mode(&v_lli->cfg, IO_MODE, LINEAR_MODE);
@@ -1174,8 +1198,6 @@ static struct sun6i_dma_config sun50i_a64_dma_cfg = {
};

/*
- * TODO: Add support for more than 4g physical addressing.
- *
* The A100 binding uses the number of dma channels from the
* device tree node.
*/
@@ -1194,6 +1216,7 @@ static struct sun6i_dma_config sun50i_a100_dma_cfg = {
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |
BIT(DMA_SLAVE_BUSWIDTH_8_BYTES),
+ .has_high_addr = true,
.has_mbus_clk = true,
};

--
2.35.1
\
 
 \ /
  Last update: 2022-04-24 19:28    [W:0.522 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site