lkml.org 
[lkml]   [2022]   [Apr]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] hwmon: (aquacomputer_d5next) Add support for Aquacomputer Farbwerk
On Fri, Apr 22, 2022 at 11:31:44AM -0700, Guenter Roeck wrote:
> On Thu, Apr 21, 2022 at 09:27:42AM +0200, Aleksa Savic wrote:
> > Extend aquacomputer_d5next driver to expose hardware temperature sensors
> > of the Aquacomputer Farbwerk RGB controller, which communicates through
> > a proprietary USB HID protocol.
> >
> > Four temperature sensors are available. Additionally, serial number and
> > firmware version are exposed through debugfs.
> >
> > Also, add Jack Doan to MAINTAINERS for this driver.
> >
> > Signed-off-by: Jack Doan <me@jackdoan.com>
> > Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
> > ---
> > If adding to MAINTAINERS requires a separate commit, I'll send it
> > separately.
> > ---
> > Documentation/hwmon/aquacomputer_d5next.rst | 3 +-
> > MAINTAINERS | 1 +
> > drivers/hwmon/Kconfig | 5 +--
> > drivers/hwmon/aquacomputer_d5next.c | 37 ++++++++++++++++++---
> > 4 files changed, 38 insertions(+), 8 deletions(-)
> >
> > diff --git a/Documentation/hwmon/aquacomputer_d5next.rst b/Documentation/hwmon/aquacomputer_d5next.rst
> > index e69f718caf5b..717e28226cde 100644
> > --- a/Documentation/hwmon/aquacomputer_d5next.rst
> > +++ b/Documentation/hwmon/aquacomputer_d5next.rst
> > @@ -6,6 +6,7 @@ Kernel driver aquacomputer-d5next
> > Supported devices:
> >
> > * Aquacomputer D5 Next watercooling pump
> > +* Aquacomputer Farbwerk RGB controller
> > * Aquacomputer Farbwerk 360 RGB controller
> > * Aquacomputer Octo fan controller
> >
> > @@ -32,7 +33,7 @@ better suited for userspace tools.
> > The Octo exposes four temperature sensors and eight PWM controllable fans, along
> > with their speed (in RPM), power, voltage and current.
> >
> > -The Farbwerk 360 exposes four temperature sensors. Depending on the device,
> > +The Farbwerk and Farbwerk 360 expose four temperature sensors. Depending on the device,
> > not all sysfs and debugfs entries will be available.
> >
> > Usage notes
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index ea2cd656ee6c..d8e3ca0fbc3a 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -1389,6 +1389,7 @@ F: drivers/media/i2c/aptina-pll.*
> >
> > AQUACOMPUTER D5 NEXT PUMP SENSOR DRIVER
> > M: Aleksa Savic <savicaleksa83@gmail.com>
> > +M: Jack Doan <me@jackdoan.com>
> > L: linux-hwmon@vger.kernel.org
> > S: Maintained
> > F: Documentation/hwmon/aquacomputer_d5next.rst
> > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> > index 5beadd8a0932..01d10c9b633a 100644
> > --- a/drivers/hwmon/Kconfig
> > +++ b/drivers/hwmon/Kconfig
> > @@ -256,12 +256,13 @@ config SENSORS_AHT10
> > will be called aht10.
> >
> > config SENSORS_AQUACOMPUTER_D5NEXT
> > - tristate "Aquacomputer D5 Next, Octo and Farbwerk 360"
> > + tristate "Aquacomputer D5 Next, Octo, Farbwerk, Farbwerk 360"
> > depends on USB_HID
> > help
> > If you say yes here you get support for sensors and fans of
> > the Aquacomputer D5 Next watercooling pump, Octo fan
> > - controller and Farbwerk 360 RGB controller, where available.
> > + controller, Farbwerk and Farbwerk 360 RGB controllers, where
> > + available.
> >
> > This driver can also be built as a module. If so, the module
> > will be called aquacomputer_d5next.
> > diff --git a/drivers/hwmon/aquacomputer_d5next.c b/drivers/hwmon/aquacomputer_d5next.c
> > index a464473bc981..7d2e7279abfb 100644
> > --- a/drivers/hwmon/aquacomputer_d5next.c
> > +++ b/drivers/hwmon/aquacomputer_d5next.c
> > @@ -1,11 +1,12 @@
> > // SPDX-License-Identifier: GPL-2.0+
> > /*
> > - * hwmon driver for Aquacomputer devices (D5 Next, Farbwerk 360, Octo)
> > + * hwmon driver for Aquacomputer devices (D5 Next, Farbwerk, Farbwerk 360, Octo)
> > *
> > * Aquacomputer devices send HID reports (with ID 0x01) every second to report
> > * sensor values.
> > *
> > * Copyright 2021 Aleksa Savic <savicaleksa83@gmail.com>
> > + * Copyright 2022 Jack Doan <me@jackdoan.com>
> > */
> >
> > #include <linux/crc16.h>
> > @@ -19,14 +20,16 @@
> > #include <asm/unaligned.h>
> >
> > #define USB_VENDOR_ID_AQUACOMPUTER 0x0c70
> > +#define USB_PRODUCT_ID_FARBWERK 0xf00a
> > #define USB_PRODUCT_ID_D5NEXT 0xf00e
> > #define USB_PRODUCT_ID_FARBWERK360 0xf010
> > #define USB_PRODUCT_ID_OCTO 0xf011
> >
> > -enum kinds { d5next, farbwerk360, octo };
> > +enum kinds { d5next, farbwerk, farbwerk360, octo };
> >
> > static const char *const aqc_device_names[] = {
> > [d5next] = "d5next",
> > + [farbwerk] = "farbwerk",
> > [farbwerk360] = "farbwerk360",
> > [octo] = "octo"
> > };
> > @@ -69,6 +72,12 @@ static u8 secondary_ctrl_report[] = {
> > #define D5NEXT_PUMP_CURRENT 112
> > #define D5NEXT_FAN_CURRENT 99
> >
> > +/* Register offsets for the Farbwerk RGB controller */
> > +#define FARBWERK_NUM_SENSORS 4
> > +#define FARBWERK_SENSOR_START 0x2f
> > +#define FARBWERK_SENSOR_SIZE 0x02
> > +#define FARBWERK_SENSOR_DISCONNECTED 0x7FFF
> > +
> > /* Register offsets for the Farbwerk 360 RGB controller */
> > #define FARBWERK360_NUM_SENSORS 4
> > #define FARBWERK360_SENSOR_START 0x32
> > @@ -125,7 +134,7 @@ static const char *const label_d5next_current[] = {
> > "Fan current"
> > };
> >
> > -/* Labels for Farbwerk 360 and Octo temperature sensors */
> > +/* Labels for Farbwerk, Farbwerk 360 and Octo temperature sensors */
> > static const char *const label_temp_sensors[] = {
> > "Sensor 1",
> > "Sensor 2",
> > @@ -319,6 +328,7 @@ static umode_t aqc_is_visible(const void *data, enum hwmon_sensor_types type, u3
> > if (channel == 0)
> > return 0444;
> > break;
> > + case farbwerk:
> > case farbwerk360:
> > case octo:
> > return 0444;
> > @@ -551,8 +561,7 @@ static const struct hwmon_chip_info aqc_chip_info = {
> > .info = aqc_info,
> > };
> >
> > -static int aqc_raw_event(struct hid_device *hdev, struct hid_report *report, u8 *data,
> > - int size)
> > +static int aqc_raw_event(struct hid_device *hdev, struct hid_report *report, u8 *data, int size)
> > {
> > int i, sensor_value;
> > struct aqc_data *priv;
> > @@ -587,6 +596,17 @@ static int aqc_raw_event(struct hid_device *hdev, struct hid_report *report, u8
> > priv->current_input[0] = get_unaligned_be16(data + D5NEXT_PUMP_CURRENT);
> > priv->current_input[1] = get_unaligned_be16(data + D5NEXT_FAN_CURRENT);
> > break;
> > + case farbwerk:
> > + /* Temperature sensor readings */
> > + for (i = 0; i < FARBWERK_NUM_SENSORS; i++) {
> > + sensor_value = get_unaligned_be16(data + FARBWERK_SENSOR_START +
> > + i * FARBWERK_SENSOR_SIZE);
> > + if (sensor_value == FARBWERK_SENSOR_DISCONNECTED)
> > + priv->temp_input[i] = -ENODATA;
> > + else
> > + priv->temp_input[i] = sensor_value * 10;
> > + }
> > + break;
> > case farbwerk360:
> > /* Temperature sensor readings */
> > for (i = 0; i < FARBWERK360_NUM_SENSORS; i++) {
> > @@ -733,6 +753,11 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
> > priv->voltage_label = label_d5next_voltages;
> > priv->current_label = label_d5next_current;
> > break;
> > + case USB_PRODUCT_ID_FARBWERK:
> > + priv->kind = farbwerk;
> > +
>
>
> Any special reason for this empty line ? It seems kind of random.
>
> Guenter
>

That's how code in other cases of that switch is formatted (not visible
from this patch directly), setting priv->kind and then the appropriate
labels.

Thanks,
Aleksa

> > + priv->temp_label = label_temp_sensors;
> > + break;
> > case USB_PRODUCT_ID_FARBWERK360:
> > priv->kind = farbwerk360;
> >
> > @@ -795,6 +820,7 @@ static void aqc_remove(struct hid_device *hdev)
> >
> > static const struct hid_device_id aqc_table[] = {
> > { HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_D5NEXT) },
> > + { HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_FARBWERK) },
> > { HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_FARBWERK360) },
> > { HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_OCTO) },
> > { }
> > @@ -826,4 +852,5 @@ module_exit(aqc_exit);
> >
> > MODULE_LICENSE("GPL");
> > MODULE_AUTHOR("Aleksa Savic <savicaleksa83@gmail.com>");
> > +MODULE_AUTHOR("Jack Doan <me@jackdoan.com>");
> > MODULE_DESCRIPTION("Hwmon driver for Aquacomputer devices");
> > --
> > 2.35.1
> >

\
 
 \ /
  Last update: 2022-04-23 18:24    [W:2.703 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site