lkml.org 
[lkml]   [2022]   [Apr]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 4/4] spi: sun6i: add support for R329 SPI controllers
From
Date
在 2022-04-22星期五的 18:59 -0500,Samuel Holland写道:
> On 4/22/22 10:56 AM, icenowy@outlook.com wrote:
> > From: Icenowy Zheng <icenowy@aosc.io>
> >
> > R329 has two SPI controllers. One of it is quite similar to
> > previous
> > ones, but with internal clock divider removed; the other added MIPI
> > DBI
> > Type-C offload based on the first one.
> >
> > Add basical support for these controllers. As we're not going to
> > support the DBI functionality now, just implement the two kinds of
> > controllers as the same.
>
> I'm curious what speeds you were able to use SPI at. On D1, with
> effectively
> these same changes, I would always get corrupted data when reading
> from the
> onboard SPI NAND on the Nezha board. However, if I enabled the "new
> mode of
> sample timing" (bit 2 in GBL_CTL_REG), I got the correct data.

Oh my usage never read from device now, because it's a write-only MIPI
DBI panel.

>
> Regards,
> Samuel


\
 
 \ /
  Last update: 2022-04-23 07:33    [W:0.076 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site